UCC28070A

現行

具展頻範圍 (10kHz 至 300kHz) 的雙相交錯式 CCM PFC 控制器

產品詳細資料

Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode CCM Topology Boost, PFC controller Rating Catalog Features > 750 W applications, Average current mode, Continuous Control Mode, Interleaved, Overvoltage protection, Programable Switching Frequency Duty cycle (max) (%) 99
Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode CCM Topology Boost, PFC controller Rating Catalog Features > 750 W applications, Average current mode, Continuous Control Mode, Interleaved, Overvoltage protection, Programable Switching Frequency Duty cycle (max) (%) 99
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4
  • Interleaved average current-mode PWM control with inherent current matching
  • Advanced current-synthesizer current sensing for superior efficiency
  • Highly-linear multiplier output with internal quantized voltage feed-forward correction for near-unity PF
  • Extended range programmable frequency (10kHz to 300kHz)
  • Programmable maximum duty-cycle clamp
  • Programmable frequency dithering rate and magnitude for enhanced EMI reduction
    • Magnitude: 3kHz to 30kHz
    • Rate: Up to 30kHz
  • External clock synchronization capability
  • Enhanced load and line transient response through slew-rate correction of voltage amplifier output current
  • Programmable peak current limiting
  • Bias-supply UVLO, overvoltage protection, open‑loop detection, and PFC-enable monitoring
  • External PFC-disable interface
  • Open-circuit protection on VSENSE and VINAC pins
  • Programmable soft-start
  • Interleaved average current-mode PWM control with inherent current matching
  • Advanced current-synthesizer current sensing for superior efficiency
  • Highly-linear multiplier output with internal quantized voltage feed-forward correction for near-unity PF
  • Extended range programmable frequency (10kHz to 300kHz)
  • Programmable maximum duty-cycle clamp
  • Programmable frequency dithering rate and magnitude for enhanced EMI reduction
    • Magnitude: 3kHz to 30kHz
    • Rate: Up to 30kHz
  • External clock synchronization capability
  • Enhanced load and line transient response through slew-rate correction of voltage amplifier output current
  • Programmable peak current limiting
  • Bias-supply UVLO, overvoltage protection, open‑loop detection, and PFC-enable monitoring
  • External PFC-disable interface
  • Open-circuit protection on VSENSE and VINAC pins
  • Programmable soft-start

The UCC28070A device is an extended-frequency-range derivative of the UCC28070 device, capable of operating at low switching frequencies desired for IGBT power-switch based PFC converters in high-power applications.

The UCC28070A device is capable of operating at frequencies from 10kHz to 300kHz, thus extending the range of operation compared to the UCC28070 device whose minimum operating frequency was limited to 30kHz. All the other features and benefits of the UCC28070 device are also available in the UCC28070A device. The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted EMI filtering becomes easier and less expensive.

Like the UCC28070 device, the UCC28070A device also features multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements. All protection features in the UCC28070 device such as output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection are available in the UCC28070A device as well.

The UCC28070A device is an extended-frequency-range derivative of the UCC28070 device, capable of operating at low switching frequencies desired for IGBT power-switch based PFC converters in high-power applications.

The UCC28070A device is capable of operating at frequencies from 10kHz to 300kHz, thus extending the range of operation compared to the UCC28070 device whose minimum operating frequency was limited to 30kHz. All the other features and benefits of the UCC28070 device are also available in the UCC28070A device. The 180° out-of-phase interleaved operation generates substantial reduction in input and output ripple currents and conducted EMI filtering becomes easier and less expensive.

Like the UCC28070 device, the UCC28070A device also features multiple innovations including current synthesis and quantized voltage feedforward to promote performance enhancements in PF, efficiency, THD, and transient response. Features including frequency dithering, clock synchronization, and slew rate enhancement further expand the potential performance enhancements. All protection features in the UCC28070 device such as output overvoltage detection, programmable peak-current limit, undervoltage lockout, and open-loop protection are available in the UCC28070A device as well.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 7
類型 標題 日期
* Data sheet UCC28070A Extended Frequency Range (10kHz to 300kHz), Interleaving Continuous Conduction Mode PFC Controller datasheet (Rev. B) PDF | HTML 2023年 9月 8日
Product overview PFC Controller Step-by-Step Selection Guide PDF | HTML 2023年 2月 28日
Application note UCC2806x PCB Layout Guideline for PFC 2019年 4月 29日
White paper Advancing Power Supply Solutions Through the Promise of GaN 2015年 2月 24日
More literature Design Review of a Full-Featured 350-W Offline Power Converter 2013年 10月 29日
Application note UCC28070 Implement Bridgeless PFC Pre-Regulator Design 2009年 6月 18日
User guide UCC28070, 300-W Interleaved PFC Pre-Regulator (Rev. B) 2009年 5月 12日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28070EVM — UCC28070 評估模組

The UCC28070 evaluation module is a 300W, two-phase interleaved, PFC pre-regulator that uses average current mode control techniques to achieve near unity power factor. The pre-regulator was designed to operate off a universal ac line input of 85V to 265V and provides a regulated 390V dc output. (...)
使用指南: PDF
TI.com 無法提供
模擬型號

UCC28070 PSpice Average Model

SLUM098.ZIP (210 KB) - PSpice Model
模擬型號

UCC28070 PSpice Start-up Simulation Using Average Model

SLUM097.ZIP (76 KB) - PSpice Model
計算工具

SLUC114 UCC28070 Excel Applications Design Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
UCC28070 雙相交錯式連續傳導模式 (CCM) PFC 控制器 UCC28070A 具展頻範圍 (10kHz 至 300kHz) 的雙相交錯式 CCM PFC 控制器
硬體開發
開發板
UCC28070EVM UCC28070 評估模組
Gerber 檔案

UCC28070 Mathcad Design Tool

SLUC667.ZIP (217 KB)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 20 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片