The LM26003 is a switching regulator designed for the high-efficiency requirements of
applications with standby modes. The device features a low-current sleep mode to maintain
efficiency under light-load conditions and current-mode control for accurate regulation over a wide
input voltage range. Quiescent current is reduced to 10.8 µA typically in shutdown mode and less
than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.
The LM26003 device can deliver up to 3 A of continuous load current with a fixed current
limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0 V to
38 V and can operate with input voltages as low as 3 V during line transients.
Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can
be synchronized to an external clock.
Other features include Power Good, adjustable soft-start, enable pin, input undervoltage
protection, and an internal bootstrap diode for reduced component count.
The LM26003 is a switching regulator designed for the high-efficiency requirements of
applications with standby modes. The device features a low-current sleep mode to maintain
efficiency under light-load conditions and current-mode control for accurate regulation over a wide
input voltage range. Quiescent current is reduced to 10.8 µA typically in shutdown mode and less
than 40 µA in sleep mode. Forced PWM mode is also available to disable sleep mode.
The LM26003 device can deliver up to 3 A of continuous load current with a fixed current
limit, through the internal N-channel switch. The part has a wide input voltage range of 4.0 V to
38 V and can operate with input voltages as low as 3 V during line transients.
Operating frequency is adjustable from 150 kHz to 500 kHz with a single resistor and can
be synchronized to an external clock.
Other features include Power Good, adjustable soft-start, enable pin, input undervoltage
protection, and an internal bootstrap diode for reduced component count.