LM5008A

AKTIV

Nicht synchroner Abwärtsregler (Buck), 6−95 V, großer Vin-Bereich, 350 mA, konstant aktiv

Jetzt bestellen

Datenblatt

document-pdfAcrobat LM5008A 95-V, 350-mA, Constant On-Time DC/DC Buck Switching Regulator datasheet (Rev. H) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung

LM5163

AKTIV

Synchroner DC/DC-Abwärtswandler mit 100 V-Eingang und 0,5 A und extrem niedrigem IQ Synchronous rectification for smaller footprint and high efficiency and low IQ.

LM5008A

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

0.35

Vin (min) (V)

6

Vin (max) (V)

95

Switching frequency (min) (kHz)

50

Switching frequency (max) (kHz)

600

Features

Enable, Over Current Protection

Control mode

Constant on-time (COT)

Vout (min) (V)

2.5

Vout (max) (V)

75

Iq (typ) (µA)

485

Duty cycle (max) (%)

99

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

0.35

Vin (min) (V)

6

Vin (max) (V)

95

Switching frequency (min) (kHz)

50

Switching frequency (max) (kHz)

600

Features

Enable, Over Current Protection

Control mode

Constant on-time (COT)

Vout (min) (V)

2.5

Vout (max) (V)

75

Iq (typ) (µA)

485

Duty cycle (max) (%)

99

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

WSON (NGU)

8

16 mm² 4 x 4

Operating Input Voltage Range: 6 V to 95 V
Integrated 100-V N-Channel Buck Switch
Internal Start-Up Regulator
No Loop Compensation Required
Ultra-Fast Transient Response
On-Time Varies Inversely With Input Voltage
Operating Frequency Remains Constant With Varying Line Voltage and Load Current
Adjustable Output Voltage From 2.5 V
Highly Efficient Operation
Precision Internal Reference
Low Bias Current
Intelligent Current Limit
Thermal Shutdown
8-Pin VSSOP and 8-Pin WSON Packages
Create a Custom Design Using the LM5008A With the WEBENCH^® Power Designer

Operating Input Voltage Range: 6 V to 95 V
Integrated 100-V N-Channel Buck Switch
Internal Start-Up Regulator
No Loop Compensation Required
Ultra-Fast Transient Response
On-Time Varies Inversely With Input Voltage
Operating Frequency Remains Constant With Varying Line Voltage and Load Current
Adjustable Output Voltage From 2.5 V
Highly Efficient Operation
Precision Internal Reference
Low Bias Current
Intelligent Current Limit
Thermal Shutdown
8-Pin VSSOP and 8-Pin WSON Packages
Create a Custom Design Using the LM5008A With the WEBENCH^® Power Designer

The LM5008A DC/DC converter is a functional variant of the LM5008 COT Buck Switching Regulator. The functional differences of the LM5008A are: the minimum input operating voltage is 6 V, the on-time equation is slightly different, and the requirement for a minimum load current is removed.

The LM5008A 350-mA step-down switching regulator features all of the functions required to implement a low-cost and efficient buck regulator. This high-voltage converter has an integrated 100-V N-channel buck switch and operates over an input voltage range of 6 V to 95 V. The device is easy to implement and is provided in 8-pin VSSOP and the thermally enhanced 8-pin WSON packages. The converter uses PWM control scheme with an on-time inversely proportional to V_IN. This feature allows the operating frequency to remain relatively constant. The control scheme requires no loop compensation. An intelligent current limit is implemented with forced off-time, which is inversely proportional to V_OUT. This scheme ensures short-circuit control while providing minimum foldback. Other features include: thermal shutdown, V_CC undervoltage lockout, gate drive undervoltage lockout, maximum duty cycle limiter, and a pre-charge switch.

The LM5008A DC/DC converter is a functional variant of the LM5008 COT Buck Switching Regulator. The functional differences of the LM5008A are: the minimum input operating voltage is 6 V, the on-time equation is slightly different, and the requirement for a minimum load current is removed.

The LM5008A 350-mA step-down switching regulator features all of the functions required to implement a low-cost and efficient buck regulator. This high-voltage converter has an integrated 100-V N-channel buck switch and operates over an input voltage range of 6 V to 95 V. The device is easy to implement and is provided in 8-pin VSSOP and the thermally enhanced 8-pin WSON packages. The converter uses PWM control scheme with an on-time inversely proportional to V_IN. This feature allows the operating frequency to remain relatively constant. The control scheme requires no loop compensation. An intelligent current limit is implemented with forced off-time, which is inversely proportional to V_OUT. This scheme ensures short-circuit control while providing minimum foldback. Other features include: thermal shutdown, V_CC undervoltage lockout, gate drive undervoltage lockout, maximum duty cycle limiter, and a pre-charge switch.

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 3

	Typ	Titel		Datum
*	Data sheet	LM5008A 95-V, 350-mA, Constant On-Time DC/DC Buck Switching Regulator datasheet (Rev. H)	PDF \| HTML	11 Okt 2018
	White paper	Wide VIN power management ICs simplify white paper (Rev. A)		19 Sep 2013
	EVM User's guide	AN-1925 LM5008A Evaluation Board (Rev. C)		30 Apr 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM5008AEVAL — Evaluierungsplatine für den LM5008A V Abwärts-Schaltregler mit konstanter Einschaltdauer

The LM5008AEVAL evaluation board provides the design engineer with a fully functional buck regulator, employing the constant on-time (COT) operating principle. This evaluation board provides a 5V output over an input range of 8V to 75V. The circuit delivers load currents to 300 mA, with current (...)

Benutzerhandbuch: PDF