Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)
NEU

LMR66430-EP

AKTIV

Verbessertes Produkt – synchroner Abwärtswandler, 36 V, 3 A, mit Ruhestrom, IQ, von 1,5 µ

Jetzt bestellen
Datenblatt

LMR66430-EP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog, HiRel Enhanced Product Operating temperature range (°C) -55 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 3 Vin (min) (V) 3 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Fixed Output, Forced PWM, Frequency synchronization, Light Load Efficiency, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Vout (min) (V) 1 Vout (max) (V) 35 Iq (typ) (µA) 1.5 Duty cycle (max) (%) 98
Rating Catalog, HiRel Enhanced Product Operating temperature range (°C) -55 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 3 Vin (min) (V) 3 Vin (max) (V) 36 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Enable, Fixed Output, Forced PWM, Frequency synchronization, Light Load Efficiency, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Vout (min) (V) 1 Vout (max) (V) 35 Iq (typ) (µA) 1.5 Duty cycle (max) (%) 98
VQFN-FCRLF (RXB) 14 6.76 mm² 2.6 x 2.6
  • Wide input voltage range
    • 3.35V to 36V rising edge
    • 2.7V to 36V falling edge
    • 42V absolute maximum
  • Integrated 132mΩ and 75mΩ MOSFETs
  • Optimized for low EMI requirements:
    • Dual Random Spread Spectrum reduces peak emissions
    • Pin selectable FPWM mode for constant frequency at light loads and FSW synchronization with MODE/SYNC pin
    • Adjustable FSW: 200kHz – 2.2MHz with RT pin
  • Miniature design size and low component cost:
    • 2.6mm × 2.6mm enhanced HotRod™ QFN package with wettable flanks and internal lead free solder
    • Internal control loop compensation
  • Wide input voltage range
    • 3.35V to 36V rising edge
    • 2.7V to 36V falling edge
    • 42V absolute maximum
  • Integrated 132mΩ and 75mΩ MOSFETs
  • Optimized for low EMI requirements:
    • Dual Random Spread Spectrum reduces peak emissions
    • Pin selectable FPWM mode for constant frequency at light loads and FSW synchronization with MODE/SYNC pin
    • Adjustable FSW: 200kHz – 2.2MHz with RT pin
  • Miniature design size and low component cost:
    • 2.6mm × 2.6mm enhanced HotRod™ QFN package with wettable flanks and internal lead free solder
    • Internal control loop compensation

The LMR66430-EP is a small 36V, 3A, synchronous step-down DC/DC converter with an enhanced HotRod QFN package. This easy-to-use converter supports a wide input voltage range of 2.7V to 36V (after start-up or after operating) with transients up to 42V.

The LMR66430-EP is specifically designed to meet low standby power requirements for always-on, applications. Auto mode enables frequency foldback when operating at light loads, allowing high light load efficiency. A seamless transition between pulse width modulation (PWM) and pulse frequency modulation (PFM) modes along with very low MOSFET ON resistances makes sure there is exceptional efficiency across the entire load range. The control architecture (peak current mode) and feature set are an excellent choice for an ultra-small design size with minimal output capacitance. The device minimizes input filter size by using dual-random spread spectrum (DRSS), a low-EMI enhanced HotRod QFN package, and an optimized pinout. The MODE/SYNC and RT pin variants can be used to set or synchronize the frequency to avoid noise sensitive frequency bands. There are NC pins between critical high voltage pins, reducing potential short circuits between pins. The rich feature set of the LMR66430-EP is designed to simplify implementation for a wide range of industrial end equipment.

The LMR66430-EP is a small 36V, 3A, synchronous step-down DC/DC converter with an enhanced HotRod QFN package. This easy-to-use converter supports a wide input voltage range of 2.7V to 36V (after start-up or after operating) with transients up to 42V.

The LMR66430-EP is specifically designed to meet low standby power requirements for always-on, applications. Auto mode enables frequency foldback when operating at light loads, allowing high light load efficiency. A seamless transition between pulse width modulation (PWM) and pulse frequency modulation (PFM) modes along with very low MOSFET ON resistances makes sure there is exceptional efficiency across the entire load range. The control architecture (peak current mode) and feature set are an excellent choice for an ultra-small design size with minimal output capacitance. The device minimizes input filter size by using dual-random spread spectrum (DRSS), a low-EMI enhanced HotRod QFN package, and an optimized pinout. The MODE/SYNC and RT pin variants can be used to set or synchronize the frequency to avoid noise sensitive frequency bands. There are NC pins between critical high voltage pins, reducing potential short circuits between pins. The rich feature set of the LMR66430-EP is designed to simplify implementation for a wide range of industrial end equipment.
filter Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet LMR66430-EP 36V, 3A, Ultra-Small, Synchronous Step-Down Converter datasheet 12 Sep 2024
* Radiation & reliability report LMR66430-EP Enhanced Product Qualification and Reliability Report PDF | HTML 27 Sep 2024
EVM User's guide LMR66430-EP Evaluation Module PDF | HTML 13 Nov 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LMQ66430-2EVM — LMQ66430-Evaluierungsmodul für 36-V, synchronen 3-A-Abwärtswandler in verbessertem HotRod™ QFN

Das Evaluierungsmodul (EVM) LMQ66430-2EVM unterstützt Entwickler bei der Evaluierung des Betriebs und der Leistung des LMQ66430-Q1-Bausteins, eines synchronen DC/DC-Abwärtswandlers, der bis zu 3 A Laststrom aus einer Eingangsspannung von bis zu 36 V erreicht. Der LMQ66430-Q1 verfügt über einen (...)

Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Simulationsmodell

LMR66430-EP/LMQ66430-Q1 Unencrypted PSpice Model

SNVMCE5.ZIP (254 KB) - PSpice Model
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VQFN-FCRLF (RXB) 14 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos