Gehäuseinformationen
| Gehäuse | Pins TSSOP (PW) | 8 |
| Betriebstemperaturbereich (°C) -55 to 125 |
| Gehäusemenge | Träger 250 | SMALL T&R |
Merkmale von TL7700-SEP
- VID V62/19602
- Radiation hardened
- Single event latch-up (SEL) immune to 43 MeV-cm2/mg at 125°C
- Total ionizing dose (TID) RLAT for every wafer lot up to 20 krad(Si)
- Space enhanced plastic
- Controlled baseline
- Gold wire
- NiPdAu lead finish
- One assembly and test site
- One fabrication site
- Available in military (–55°C to 125°C) temperature range
- Extended product life cycle
- Extended product-change notification
- Product traceability
- Enhanced mold compound for low outgassing
- Adjustable sense voltage with two external resistors
- 1% sense voltage tolerance (25°C)
- Adjustable hysteresis of sense voltage
- Wide operating supply-voltage range: 1.8 V to 40 V
- Low power consumption: ICC = 0.6 mA typical, VCC = 40 V
Beschreibung von TL7700-SEP
The TL7700-SEP is a bipolar integrated circuit designed for use as a reset controller in microcomputer and microprocessor systems. The SENSE voltage can be set to any value greater than 0.5 V using two external resistors.
Circuit function is very stable, with supply voltage in the 1.8-V to 40-V range. Minimum supply current allows use with AC line operation and portable battery operation. The TL7700-SEP device is designed for operation from –55°C to 125°C.