Startseite Energiemanagement Überwachungs- & Rücksetz-ICs
Startseite
Energiemanagement
Überwachungs- & Rücksetz-ICs

TPS3514

AKTIV

3-Kanal-Überwacher mit Überstromerkennung für Schaltnetzteile

Jetzt bestellen
Datenblatt

Eine neuere Version dieses Produkts ist verfügbar

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TPS3704 AKTIV Mehrkanal-Fensterüberwacher für die Automobilindustrie mit hoher Genauigkeit und kompaktem Formfakto Window supervisor with up to four monitored supplies and included separate VDD and sense pins; without watchdog timer

TPS3514

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of supplies monitored 3 Threshold voltage 1 (typ) (V) 2.2, 3.5, 3.9, 6.1, 9, 13.8 Features Overcurrent sense, PFI/PFO, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 2.3 Iq (typ) (mA) 1 Output driver type/reset output Active-low, Open-drain Time delay (ms) 300 Supply voltage (min) (V) 4.5 Supply voltage (max) (V) 15 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
Number of supplies monitored 3 Threshold voltage 1 (typ) (V) 2.2, 3.5, 3.9, 6.1, 9, 13.8 Features Overcurrent sense, PFI/PFO, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 2.3 Iq (typ) (mA) 1 Output driver type/reset output Active-low, Open-drain Time delay (ms) 300 Supply voltage (min) (V) 4.5 Supply voltage (max) (V) 15 Rating Catalog Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 85
PDIP (N) 14 181.42 mm² 19.3 x 9.4 SOIC (D) 14 51.9 mm² 8.65 x 6
  • Over-Voltage Protection and
    Lockout: 12V, 5V, and 3.3V Supplies
  • Over-Current Protection and Lockout: 12V, 5V, and 3.3V Supplies
  • Under-Voltage Protection and Lockout: 12V Supplies
  • Under-Voltage Detect: 5V and 3.3V Supplies
  • Fault-Protection Output with Open-Drain Output Stage
  • Open-Drain, Power-Good Output Signal: Monitors Power-Good Signal Input 3.3V and 5V Supplies
  • 300ms Power-Good Delay
  • 75ms Delay: 5V, 3.3V Power-Supply Short-Circuit Turn-On Protection
  • 2.3ms PSON Control To FPO Turn-Off Delay
  • 38ms PSON Control Debounce
  • Wide Supply Voltage Range: 4.5V to 15V

All trademarks are the property of their respective owners.
  • Over-Voltage Protection and
    Lockout: 12V, 5V, and 3.3V Supplies
  • Over-Current Protection and Lockout: 12V, 5V, and 3.3V Supplies
  • Under-Voltage Protection and Lockout: 12V Supplies
  • Under-Voltage Detect: 5V and 3.3V Supplies
  • Fault-Protection Output with Open-Drain Output Stage
  • Open-Drain, Power-Good Output Signal: Monitors Power-Good Signal Input 3.3V and 5V Supplies
  • 300ms Power-Good Delay
  • 75ms Delay: 5V, 3.3V Power-Supply Short-Circuit Turn-On Protection
  • 2.3ms PSON Control To FPO Turn-Off Delay
  • 38ms PSON Control Debounce
  • Wide Supply Voltage Range: 4.5V to 15V

All trademarks are the property of their respective owners.

The TPS3514 is a PC switching power-supply system monitor with minimum external components. It provides under-voltage lockout (UVLO), over-voltage (OV), under-voltage (UV), over-current (OC) protection circuits, power-good indicator, and on/off control.

UVLO thresholds are 4.45V (on) and 3.65V (off). Over-current protection (OCP) and over-voltage protection (OVP) monitor 3.3V, 5V, and 12V supplies. When an OC or OV condition is detected, the power-good output (PGO) is asserted low and the fault protection output (FPO) is latched high. PSON from low-to-high resets the latch. The OCP function will be enabled 75ms after PSON goes LOW with PGI HIGH and a debounce of typically 38ms. A built-in 2.3ms delay with 38ms debounce from PSON to FPO output is enabled at turn-off.

An external resistor is connected between the RI pin and the GND pin. This will program a precise I(REF) for OCP function. The programmable I(REF) range is from 12.5µA to 62.5µA. Three OCP comparators and the I(REF) section are supplied by VS12. The current draw from the VS12 pin is less than 1mA.

The power-good feature monitors PGI, the 3.3V and 5V supplies, and issues a power-good signal when the output is ready.

The TPS3514 is characterized for operation from -40°C to +85°C. The TPS3514 is available in DIP-14 and SO-14 packages.

The TPS3514 is a PC switching power-supply system monitor with minimum external components. It provides under-voltage lockout (UVLO), over-voltage (OV), under-voltage (UV), over-current (OC) protection circuits, power-good indicator, and on/off control.

UVLO thresholds are 4.45V (on) and 3.65V (off). Over-current protection (OCP) and over-voltage protection (OVP) monitor 3.3V, 5V, and 12V supplies. When an OC or OV condition is detected, the power-good output (PGO) is asserted low and the fault protection output (FPO) is latched high. PSON from low-to-high resets the latch. The OCP function will be enabled 75ms after PSON goes LOW with PGI HIGH and a debounce of typically 38ms. A built-in 2.3ms delay with 38ms debounce from PSON to FPO output is enabled at turn-off.

An external resistor is connected between the RI pin and the GND pin. This will program a precise I(REF) for OCP function. The programmable I(REF) range is from 12.5µA to 62.5µA. Three OCP comparators and the I(REF) section are supplied by VS12. The current draw from the VS12 pin is less than 1mA.

The power-good feature monitors PGI, the 3.3V and 5V supplies, and issues a power-good signal when the output is ready.

The TPS3514 is characterized for operation from -40°C to +85°C. The TPS3514 is available in DIP-14 and SO-14 packages.
filter Andere Überwachungs- & Rücksetz-ICs suchen
Herunterladen

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
TPS3808 AKTIV Überwachungseinheit mit niedrigem Ruhestrom mit programmierbarer Verzögerung und manueller Rücksetzu Improved accuracy and lower quiescent current

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet PC Power-Supply Supervisors datasheet (Rev. C) 01 Dez 2006

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​