TPS5410

AKTIV

Synchroner Abwärtswandler SWIFT™, 5,5 bis 36 V Eingang, 1 A, 500 kHz

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS5410 1A, Wide Input Range, Step-Down Converter datasheet (Rev. E) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung

LMR33610

AKTIV

Synchroner Abwärtswandler SIMPLE SWITCHER®, 3,8 bis 36 V, 1 A, in Gehäuse SOIC-8 Smaller footprint, higher efficiency, lower IQ and lower EMI.

TPS5410

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

1

Vin (min) (V)

5.5

Vin (max) (V)

36

Switching frequency (min) (kHz)

500

Switching frequency (max) (kHz)

500

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

1.23

Vout (max) (V)

31

Iq (typ) (µA)

3000

Duty cycle (max) (%)

87.5

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

1

Vin (min) (V)

5.5

Vin (max) (V)

36

Switching frequency (min) (kHz)

500

Switching frequency (max) (kHz)

500

Features

Enable, Over Current Protection

Control mode

Voltage mode

Vout (min) (V)

1.23

Vout (max) (V)

31

Iq (typ) (µA)

3000

Duty cycle (max) (%)

87.5

SOIC (D)

8

29.4 mm² 4.9 x 6

5.5V to 36V wide input voltage range
Up to 1A continuous (1.2A peak) output current
High efficiency up to 95% enabled by 110mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feedforward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small 8-pin SOIC package

5.5V to 36V wide input voltage range
Up to 1A continuous (1.2A peak) output current
High efficiency up to 95% enabled by 110mΩ integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22V with 1.5% initial accuracy
Internal compensation minimizes external parts count
Fixed 500kHz switching frequency for small filter size
Improved line regulation and transient response by input voltage feedforward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small 8-pin SOIC package

The TPS5410 is a high-output-current PWM converter that integrates a low-resistance, high-side, N-channel MOSFET. Included on the substrate with the listed features is a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18µA typically. Other features include an active high enable, overcurrent limiting, overvoltage protection, and thermal shutdown. To reduce design complexity and external component count, the TPS5410 feedback loop is internally compensated.

The TPS5410 device is available in an easy to use 8-pin SOIC package. TI provides evaluation modules and software tools to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

The TPS5410 is a high-output-current PWM converter that integrates a low-resistance, high-side, N-channel MOSFET. Included on the substrate with the listed features is a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18µA typically. Other features include an active high enable, overcurrent limiting, overvoltage protection, and thermal shutdown. To reduce design complexity and external component count, the TPS5410 feedback loop is internally compensated.

The TPS5410 device is available in an easy to use 8-pin SOIC package. TI provides evaluation modules and software tools to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 5

	Typ	Titel		Datum
*	Data sheet	TPS5410 1A, Wide Input Range, Step-Down Converter datasheet (Rev. E)	PDF \| HTML	19 Jan 2024
	Selection guide	Power Management Guide 2018 (Rev. R)		25 Jun 2018
	Application note	Using the TPS5430 As An Inverting Buck Boost Converter (Rev. A)		15 Aug 2007
	Application note	Using TPS5410/20/30/31/50 w/Aluminum/Ceramic Output Capacitors (Rev. C)		21 Mär 2007
	EVM User's guide	TPS5410EVM-203 1-A Regulator EVM		01 Sep 2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS5410EVM-203 — Evaluierungsmodul für 1-A-Wandler

The TPS5410EVM-203 evaluation module allows the designer to evaluate two different configurations of the TPS5410 SWIFT DC/DC converter on the same PCB over a wide input voltage range. The first design is a 14.5 to 36 V input to 12 V output at 1 A using a 47 µF (...)

Benutzerhandbuch: PDF