Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)
NEU

TPS542025

VORSCHAU

Synchroner Abwärtswandler, 4,5 V bis 30 V Eingang, 2 A, 500 kHz

alarmBenachrichtigungen Jetzt bestellen
Datenblatt

TPS542025

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 2 Vin (min) (V) 4.5 Vin (max) (V) 30 Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable EMI features Spread Spectrum Control mode current mode Vout (min) (V) 5 Vout (max) (V) 5 Iq (typ) (µA) 45 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 2 Vin (min) (V) 4.5 Vin (max) (V) 30 Switching frequency (min) (kHz) 500 Switching frequency (max) (kHz) 500 Features Enable, Light Load Efficiency, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, UVLO adjustable EMI features Spread Spectrum Control mode current mode Vout (min) (V) 5 Vout (max) (V) 5 Iq (typ) (µA) 45 Duty cycle (max) (%) 100
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • Configured for a wide range of applications
    • 4.5V to 30V input voltage range
    • Selectable adjustable output (TPS542021), fixed 5V output (TPS542025)
    • Up to 2A continuous output current
    • 0.6V ± 1.5% reference voltage (25°C)
    • Supports low drop out mode
  • High efficiency
    • Integrated 100mΩ and 60mΩ MOSFETs
    • Low 2µA shutdown, 26µA quiescent current
    • Pulse frequency modulation (PFM) for high light load efficiency
  • Ease of use
    • Peak current mode control with internal loop compensation
    • Fixed 500kHz switching frequency
    • Internal 5ms soft start
    • Frequency spread spectrum to reduce EMI
    • Overcurrent protection for both MOSFETs with hiccup mode protection
    • Non-latched protection for over temperature protection (OTP), overcurrent protection (OCP), overvoltage protection (OVP), and undervoltage lockout (UVLO)
    • P2P, B2B with TPS54202
    • SOT-23 (6) package
  • Configured for a wide range of applications
    • 4.5V to 30V input voltage range
    • Selectable adjustable output (TPS542021), fixed 5V output (TPS542025)
    • Up to 2A continuous output current
    • 0.6V ± 1.5% reference voltage (25°C)
    • Supports low drop out mode
  • High efficiency
    • Integrated 100mΩ and 60mΩ MOSFETs
    • Low 2µA shutdown, 26µA quiescent current
    • Pulse frequency modulation (PFM) for high light load efficiency
  • Ease of use
    • Peak current mode control with internal loop compensation
    • Fixed 500kHz switching frequency
    • Internal 5ms soft start
    • Frequency spread spectrum to reduce EMI
    • Overcurrent protection for both MOSFETs with hiccup mode protection
    • Non-latched protection for over temperature protection (OTP), overcurrent protection (OCP), overvoltage protection (OVP), and undervoltage lockout (UVLO)
    • P2P, B2B with TPS54202
    • SOT-23 (6) package

The TPS54202x is a 4.5V to 30V input voltage range, 2A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5ms internal soft start to reduce component count.

By integrating the MOSFETs and employing the SOT-23 package, the TPS54202x achieves the high power density and offers a small footprint on the PCB. TPS542025 has fixed 5V output which saves BOM by further reducing FB resistors. TPS542021 has adjustable output by a different FB resistor configuration.

The TPS54202x operates in pulse frequency modulation for high light load efficiency and reduces the power loss. The frequency spread spectrum operation is introduced for Electromagnetic Interference (EMI) reduction.

Cycle-by-cycle current limit in both high-side MOSFET protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the present time.

The TPS54202x is a 4.5V to 30V input voltage range, 2A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation and 5ms internal soft start to reduce component count.

By integrating the MOSFETs and employing the SOT-23 package, the TPS54202x achieves the high power density and offers a small footprint on the PCB. TPS542025 has fixed 5V output which saves BOM by further reducing FB resistors. TPS542021 has adjustable output by a different FB resistor configuration.

The TPS54202x operates in pulse frequency modulation for high light load efficiency and reduces the power loss. The frequency spread spectrum operation is introduced for Electromagnetic Interference (EMI) reduction.

Cycle-by-cycle current limit in both high-side MOSFET protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the present time.
filter Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet TPS54202x 4.5V to 30V, 2A, EMI Friendly, Synchronous Step-Down Converter datasheet PDF | HTML 24 Jan 2025
EVM User's guide TPS542025 Step-Down Converter Evaluation Module PDF | HTML 18 Feb 2025
Certificate TPS542025EVM EU Declaration of Conformity (DoC) 16 Dez 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOT-23-THN (DDC) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos