TPS54316-EP

Name: TPS54316-EP
Brand: TI
SKU: TPS54316-EP
Price: 4.673 USD

AKTIV

Verbessertes Produkt – synchrone Abwärts-PWM-Schalter, 3 bis 6 V Eingang, 3 A Ausgang, mit integrier

Jetzt bestellen

Datenblatt

document-pdfAcrobat 3-V to 6-V Input, 3-A Output Synchronous-Buck PWM datasheet (Rev. A) (Englisch)

TPS54316-EP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

3

Vin (max) (V)

6

Switching frequency (min) (kHz)

280

Switching frequency (max) (kHz)

700

Features

Enable, Power good, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

3.3

Iq (typ) (µA)

6200

Duty cycle (max) (%)

90

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

3

Vin (min) (V)

3

Vin (max) (V)

6

Switching frequency (min) (kHz)

280

Switching frequency (max) (kHz)

700

Features

Enable, Power good, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

3.3

Vout (max) (V)

3.3

Iq (typ) (µA)

6200

Duty cycle (max) (%)

90

HTSSOP (PWP)

20

41.6 mm² 6.5 x 6.4

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Extended Temperature Performance of -55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree⁽¹⁾
60-m MOSFET Switches for High Efficiency at 3-A Continuous Output Source or Sink Current
0.9 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V Fixed Output Voltage Device With 1% Initial Accuracy
Internally Compensated for Low Parts Count
Fast Transient Response
Wide PWM Frequency: Fixed 350 kHz, 550 kHz, or Adjustable 280 kHz to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Total Cost
APPLICATIONS
- Low-Voltage, High-Density Systems With Power Distributed at 5 V or 3.3 V
- Point of Load Regulation for High Performance DSPs, FPGAs, ASICs, and Microprocessors
- Broadband, Networking and Optical Communications Infrastructure
- Automotive Telematics

⁽¹⁾ Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

SWIFT, PowerPAD are trademarks of Texas Instruments.

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Extended Temperature Performance of -55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree⁽¹⁾
60-m MOSFET Switches for High Efficiency at 3-A Continuous Output Source or Sink Current
0.9 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V Fixed Output Voltage Device With 1% Initial Accuracy
Internally Compensated for Low Parts Count
Fast Transient Response
Wide PWM Frequency: Fixed 350 kHz, 550 kHz, or Adjustable 280 kHz to 700 kHz
Load Protected by Peak Current Limit and Thermal Shutdown
Integrated Solution Reduces Board Area and Total Cost
APPLICATIONS
- Low-Voltage, High-Density Systems With Power Distributed at 5 V or 3.3 V
- Point of Load Regulation for High Performance DSPs, FPGAs, ASICs, and Microprocessors
- Broadband, Networking and Optical Communications Infrastructure
- Automotive Telematics

⁽¹⁾ Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

SWIFT, PowerPAD are trademarks of Texas Instruments.

As A member of the SWIFT™ family of dc/dc regulators, the TPS54311, TPS54312, TPS54313, TPS54314, TPS54315 and TPS54316 low-input-voltage high-output current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54311, TPS54312, TPS54313, TPS54314, TPS54315 and TPS54316 devices are available in a thermally enhanced 20-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. Texas Instruments provides evaluation modules and the SWIFT designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

As A member of the SWIFT™ family of dc/dc regulators, the TPS54311, TPS54312, TPS54313, TPS54314, TPS54315 and TPS54316 low-input-voltage high-output current synchronous-buck PWM converter integrates all required active components. Included on the substrate with the listed features are a true, high performance, voltage error amplifier that provides high performance under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 3 V; an internally and externally set slow-start circuit to limit in-rush currents; and a power good output useful for processor/logic reset, fault signaling, and supply sequencing.

The TPS54311, TPS54312, TPS54313, TPS54314, TPS54315 and TPS54316 devices are available in a thermally enhanced 20-pin TSSOP (PWP) PowerPAD™ package, which eliminates bulky heatsinks. Texas Instruments provides evaluation modules and the SWIFT designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 2

	Typ	Titel		Datum
*	Data sheet	3-V to 6-V Input, 3-A Output Synchronous-Buck PWM datasheet (Rev. A)		14 Mär 2007
*	Radiation & reliability report	TPS54316MPWREP Reliability Report		24 Okt 2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.