TPS57114C-Q1

Name: TPS57114C-Q1
Brand: TI
SKU: TPS57114C-Q1
Price: 1.1 USD

AKTIV

Synchroner Abwärtswandler, 2,95 bis 6 V, 4 A, 2 MHz, für die Automobilindustrie

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS57114C-Q1 Automotive 2.95-V to 6-V, 4-A 2-MHz Synchronous Buck Converter datasheet (Rev. B) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung

TPS62810-Q1

AKTIV

4-A-Abwärtswandler für den Automobilbereich mit 2,75 bis 6 V in einem 2 mm x 3 mm messbaren QFN-Gehä Improved performance: Fixed-frequency, spread-spectrum in smaller 2-mm x 3-mm QFN with wettable flanks.

TPS57114C-Q1

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Automotive

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Topology

Buck

Type

Converter

Iout (max) (A)

4

Vin (min) (V)

2.95

Vin (max) (V)

6

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

2000

Features

Enable, Forced PWM, Frequency synchronization, Power good

Control mode

current mode

Vout (min) (V)

0.8

Vout (max) (V)

4.5

Iq (typ) (µA)

515

Duty cycle (max) (%)

100

Rating

Automotive

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Topology

Buck

Type

Converter

Iout (max) (A)

4

Vin (min) (V)

2.95

Vin (max) (V)

6

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

2000

Features

Enable, Forced PWM, Frequency synchronization, Power good

Control mode

current mode

Vout (min) (V)

0.8

Vout (max) (V)

4.5

Iq (typ) (µA)

515

Duty cycle (max) (%)

100

WQFN (RTE)

16

9 mm² 3 x 3

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
Functional Safety-Capable
- Documentation available to aid functional safety system design
Two 12-mΩ (typical) MOSFETs for high efficiency at 4-A loads
200-kHz to 2-MHz switching frequency
0.8 V ± 1% voltage reference over temperature (–40°C to +150°C)
Synchronizes to external clock
Adjustable slow start and sequencing
UV and OV power-good output
–40°C to +150°C operating junction temperature range
Thermally enhanced 3-mm × 3-mm 16-pin WQFN
Pin-compatible to the TPS54418
Newer product available: TPS62810-Q1, 6-V step-down converter in 3-mm × 2-mm VQFN package with wettable flanks

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
Functional Safety-Capable
- Documentation available to aid functional safety system design
Two 12-mΩ (typical) MOSFETs for high efficiency at 4-A loads
200-kHz to 2-MHz switching frequency
0.8 V ± 1% voltage reference over temperature (–40°C to +150°C)
Synchronizes to external clock
Adjustable slow start and sequencing
UV and OV power-good output
–40°C to +150°C operating junction temperature range
Thermally enhanced 3-mm × 3-mm 16-pin WQFN
Pin-compatible to the TPS54418
Newer product available: TPS62810-Q1, 6-V step-down converter in 3-mm × 2-mm VQFN package with wettable flanks

The TPS57114C-Q1 device is a full-featured 6-V, 4-A, synchronous step-down current-mode converter with two integrated MOSFETs.

The TPS57114C-Q1 device enables small designs by integrating the MOSFETs, implementing current-mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small 3-mm × 3-mm thermally enhanced QFN package.

The TPS57114C-Q1 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (V_ref) over temperature.

Efficiency is maximized through the integrated 12-mΩ MOSFETs and 515-µA typical supply current. Using the enable pin, shutdown supply current is reduced to 5.5 µA by entering a shutdown mode.

The internal undervoltage lockout setting is 2.45 V, but programming the threshold with a resistor network on the enable pin can increase the setting. The slow-start pin controls the output-voltage start-up ramp. An open-drain power-good signal indicates the output is within 93% to 107% of the nominal voltage.

Frequency foldback and thermal shutdown protect the device during an overcurrent condition.

The TPS57114C-Q1 device is a full-featured 6-V, 4-A, synchronous step-down current-mode converter with two integrated MOSFETs.

The TPS57114C-Q1 device enables small designs by integrating the MOSFETs, implementing current-mode control to reduce external component count, reducing inductor size by enabling up to 2-MHz switching frequency, and minimizing the IC footprint with a small 3-mm × 3-mm thermally enhanced QFN package.

The TPS57114C-Q1 device provides accurate regulation for a variety of loads with an accurate ±1% voltage reference (V_ref) over temperature.

Efficiency is maximized through the integrated 12-mΩ MOSFETs and 515-µA typical supply current. Using the enable pin, shutdown supply current is reduced to 5.5 µA by entering a shutdown mode.

The internal undervoltage lockout setting is 2.45 V, but programming the threshold with a resistor network on the enable pin can increase the setting. The slow-start pin controls the output-voltage start-up ramp. An open-drain power-good signal indicates the output is within 93% to 107% of the nominal voltage.

Frequency foldback and thermal shutdown protect the device during an overcurrent condition.

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 11

	Typ	Titel		Datum
*	Data sheet	TPS57114C-Q1 Automotive 2.95-V to 6-V, 4-A 2-MHz Synchronous Buck Converter datasheet (Rev. B)	PDF \| HTML	29 Jul 2021
	Selection guide	Buck Converter Quick Reference Guide (Rev. B)		08 Apr 2021
	Functional safety information	TPS57114C-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A)	PDF \| HTML	11 Nov 2020
	Technical article	Minimize the impact of the MLCC shortage on your power application	PDF \| HTML	29 Mär 2019
	Technical article	How to power next-generation ADAS camera modules	PDF \| HTML	11 Sep 2018
	Technical article	Use a low-quiescent-current switcher for high-voltage conversion	PDF \| HTML	28 Aug 2018
	Technical article	Let’s break it down: how buck converters make your power supply more flexible	PDF \| HTML	13 Dez 2017
	Application note	TPS57112-Q1 High Frequency (2.35 MHz) Operation		31 Mai 2016
	Application note	Enable Functionality and Adjusting Under Voltage Lockout for TPS57112-Q1 Device		05 Mai 2016
	Application note	Interfacing TPS57xxx-Q1 and TPS65320-Q1 Family Devices With Low Impendence Exter		08 Dez 2015
	EVM User's guide	TPS57114EVM User's Guide		14 Nov 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS57114EVM — TPS57114EVM – 2,95 V bis 6 V-Eingang, 4 A, 2 MHz, Synchron-Abwärts-DC/DC-Wandler – Evaluierungsmodul

The TPS57114-Q1 DC/DC converter is designed to provide up to a 4A output from an input voltage source of 2.95 V to 6 V. This evaluation module is designed to demonstrate the small printed-circuit-board (PCB) areas that may be achieved when designing with the TPS57114-Q1 regulator. The switching (...)

Benutzerhandbuch: PDF