TPS60150

Name: TPS60150
Brand: TI
SKU: TPS60150
Price: 0.539 USD

AKTIV

Ladungspumpe in Gehäuse 2x2 SON, 140 mA, 5 V

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS60150 5-V, 140-mA Charge-Pump datasheet (Rev. C) (Englisch) PDF | HTML

TPS60150

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Type

Charge pump

Iout (max) (A)

0.14

Vin (min) (V)

2.7

Vin (max) (V)

5.5

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

1500

Features

Enable, Regulated

Vout (min) (V)

Vout (max) (V)

Iq (typ) (µA)

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Type

Charge pump

Iout (max) (A)

0.14

Vin (min) (V)

2.7

Vin (max) (V)

5.5

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

1500

Features

Enable, Regulated

Vout (min) (V)

Vout (max) (V)

Iq (typ) (µA)

WSON (DRV)

4 mm² 2 x 2

2.7-V to 5.5-V Input Voltage Range
Fixed Output Voltage of 5 V
Maximum Output Current: 140 mA
1.5-MHz Switching Frequency
Typical 90-µA Quiescent Current at No Load
Condition (Skip Mode)
X2 Charge Pump
Hardware Enable and Disable Function
Built-in Soft Start
Built-in Undervoltage Lockout Protection
Thermal and Overcurrent Protection
Available in a 2-mm × 2-mm 6-Pin SON Package
with 0.8-mm Height

2.7-V to 5.5-V Input Voltage Range
Fixed Output Voltage of 5 V
Maximum Output Current: 140 mA
1.5-MHz Switching Frequency
Typical 90-µA Quiescent Current at No Load
Condition (Skip Mode)
X2 Charge Pump
Hardware Enable and Disable Function
Built-in Soft Start
Built-in Undervoltage Lockout Protection
Thermal and Overcurrent Protection
Available in a 2-mm × 2-mm 6-Pin SON Package
with 0.8-mm Height

The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5 V from an unregulated input voltage.

The 5-V output can supply a minimum of 140-mA current.

The TPS60150 device operates in skip mode when the load current falls less than 8 mA under typical condition. In skip mode operation, quiescent current is reduced to 90 µA.

Only 3 external capacitors are needed to generate the output voltage, therefore saving PCB space.

Inrush current is limited by the soft-start function during power on and power transient states.

The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2-mm × 2-mm 6-pin SON package (QFN).

The TPS60150 device is a switched capacitor voltage converter that produces a regulated, low noise, and low-ripple output voltage of 5 V from an unregulated input voltage.

The 5-V output can supply a minimum of 140-mA current.

The TPS60150 device operates in skip mode when the load current falls less than 8 mA under typical condition. In skip mode operation, quiescent current is reduced to 90 µA.

Only 3 external capacitors are needed to generate the output voltage, therefore saving PCB space.

Inrush current is limited by the soft-start function during power on and power transient states.

The TPS60150 device operates over a free-air temperature range of –40°C to 85°C. The device is available with a small 2-mm × 2-mm 6-pin SON package (QFN).

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 7

	Typ	Titel		Datum
*	Data sheet	TPS60150 5-V, 140-mA Charge-Pump datasheet (Rev. C)	PDF \| HTML	29 Okt 2015
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 Dez 2023
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 Dez 2018
	Selection guide	Power Management Guide 2018 (Rev. R)		25 Jun 2018
	Application note	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		15 Jun 2017
	Technical article	How to overcome automotive front-end design challenges	PDF \| HTML	10 Sep 2015
	User guide	TPS60150EVM-359 User's Guide (Rev. C)		02 Jul 2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS60150EVM-359 — TPS60150EVM-359-Evaluierungsmodul

The TPS60150EVM-359 facilitates evaluation of the TPS60150 150mA Charge Pump.

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Referenzdesigns

PMP10652 — System-Level-Referenzdesign für ein 30-W-ADAS-System mit den erforderlichen Schutzmaßnahmen für die

PMP10652 is a System optimized (CISPR 25 Class 3) 30W design for Surround View ADAS system.

The design has various protections such as Load dump through TVS (ISO pulse testing), Reverse Voltage (Innovative Smart diode with very low Iq), Battery Disconnect Switch with OVP protection (PFET) and is EMI (...)

Test report: PDF

Schaltplan: PDF