Startseite Energiemanagement Linear- und Low-Dropout-Regler (LDO)
Startseite
Energiemanagement
Linear- und Low-Dropout-Regler (LDO)

TPS7B82-Q1

AKTIV

Low-Drop-Out-Spannungsregler mit extrem niedrigem Ruhestrom für die Automobilindustrie (40-V-Batteri

Jetzt bestellen
Datenblatt

TPS7B82-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Output options Fixed Output Iout (max) (A) 0.3 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 3.3 Fixed output options (V) 2.5, 3.3, 5 Rating Automotive Noise (µVrms) 450 PSRR at 100 KHz (dB) 25 Iq (typ) (mA) 0.003 Thermal resistance θJA (°C/W) 31.1, 52, 63.9, 72.8 TI functional safety category Functional Safety-Capable Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features AEC Q100, Enable Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 400 Operating temperature range (°C) -40 to 150
Output options Fixed Output Iout (max) (A) 0.3 Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 3.3 Fixed output options (V) 2.5, 3.3, 5 Rating Automotive Noise (µVrms) 450 PSRR at 100 KHz (dB) 25 Iq (typ) (mA) 0.003 Thermal resistance θJA (°C/W) 31.1, 52, 63.9, 72.8 TI functional safety category Functional Safety-Capable Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features AEC Q100, Enable Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 400 Operating temperature range (°C) -40 to 150
HTSSOP (PWP) 14 32 mm² 5 x 6.4 HVSSOP (DGN) 8 14.7 mm² 3 x 4.9 TO-252 (KVU) 5 66.726 mm² 6.6 x 10.11 WSON (DRV) 6 4 mm² 2 x 2
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ 125°C
    • Temperature grade 0: –40°C ≤ T A ≤ 150°C
  • Extended junction temperature range:
    • Grade 1: –40°C ≤ T J ≤ 150°C
    • Grade 0: –40°C ≤ T J ≤ 165°C
  • Low quiescent current I Q:
    • 300-nA shutdown I Q
    • 2.7 µA typical at light loads
    • 5 µA maximum at light loads
  • 3-V to 40-V wide V IN input voltage range with up to 45-V transient
  • Maximum output current: 300 mA
  • 2% output-voltage accuracy
  • Maximum dropout voltage: 700 mV at 200-mA load current for fixed 5-V output version
  • Stable with low-ESR (0.001-Ω to 5-Ω) ceramic output-stability capacitor (1 µF to 200 µF)
  • Fixed 2.5-V, 3.3-V, and 5-V output voltage
  • Packages:
    • 8-pin HVSSOP, R θJA = 63.9°C/W
    • 6-pin WSON, R θJA = 72.8°C/W
    • 5-pin TO-252, R θJA = 31.1°C/W
    • 14-pin HTSSOP, R θJA = 52.0°C/W
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ 125°C
    • Temperature grade 0: –40°C ≤ T A ≤ 150°C
  • Extended junction temperature range:
    • Grade 1: –40°C ≤ T J ≤ 150°C
    • Grade 0: –40°C ≤ T J ≤ 165°C
  • Low quiescent current I Q:
    • 300-nA shutdown I Q
    • 2.7 µA typical at light loads
    • 5 µA maximum at light loads
  • 3-V to 40-V wide V IN input voltage range with up to 45-V transient
  • Maximum output current: 300 mA
  • 2% output-voltage accuracy
  • Maximum dropout voltage: 700 mV at 200-mA load current for fixed 5-V output version
  • Stable with low-ESR (0.001-Ω to 5-Ω) ceramic output-stability capacitor (1 µF to 200 µF)
  • Fixed 2.5-V, 3.3-V, and 5-V output voltage
  • Packages:
    • 8-pin HVSSOP, R θJA = 63.9°C/W
    • 6-pin WSON, R θJA = 72.8°C/W
    • 5-pin TO-252, R θJA = 31.1°C/W
    • 14-pin HTSSOP, R θJA = 52.0°C/W

In automotive battery-connected applications, low quiescent current (I Q) is important to save power and extend battery lifetime. Ultra-low I Q must be included for always-on systems.

The TPS7B82-Q1 is a low-dropout linear regulator designed to operate with a wide input-voltage range from 3 V to 40 V (45-V load dump protection). Operation down to 3 V allows the TPS7B82-Q1 to continue operating during cold-crank and start and stop conditions. With only 2.7-µA typical quiescent current at light load, this device is an optimal solution for powering microcontrollers (MCUs) and CAN/LIN transceivers in standby systems.

The device features integrated short-circuit and overcurrent protection. This device operates in ambient temperatures from –40°C to +125°C and with junction temperatures from –40°C to +150°C. Additionally, this device uses a thermally conductive package to enable sustained operation despite significant dissipation across the device. Because of these features, the device is designed as a power supply for various automotive applications.

In automotive battery-connected applications, low quiescent current (I Q) is important to save power and extend battery lifetime. Ultra-low I Q must be included for always-on systems.

The TPS7B82-Q1 is a low-dropout linear regulator designed to operate with a wide input-voltage range from 3 V to 40 V (45-V load dump protection). Operation down to 3 V allows the TPS7B82-Q1 to continue operating during cold-crank and start and stop conditions. With only 2.7-µA typical quiescent current at light load, this device is an optimal solution for powering microcontrollers (MCUs) and CAN/LIN transceivers in standby systems.

The device features integrated short-circuit and overcurrent protection. This device operates in ambient temperatures from –40°C to +125°C and with junction temperatures from –40°C to +150°C. Additionally, this device uses a thermally conductive package to enable sustained operation despite significant dissipation across the device. Because of these features, the device is designed as a power supply for various automotive applications.
filter Andere Linear- und Low-Dropout-Regler (LDO) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 6
Typ Titel Datum
* Data sheet TPS7B82-Q1 Automotive 300-mA, High-Voltage, Ultra-Low-IQ Low-Dropout Regulator datasheet (Rev. J) PDF | HTML 16 Aug 2023
Functional safety information TPS7B82-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. A) PDF | HTML 31 Dez 2020
Functional safety information TPS7B82-Q1 Functional Safety FIT Rate and Failure Mode Distribution 17 Dez 2019
EVM User's guide TPS7B82EVM-024 Evaluation Module User's Guide 15 Mär 2019
Application note An empirical analysis of the impact of board layout on LDO thermal performance 22 Feb 2019
EVM User's guide TPS7B8250EVM User's Guide 22 Sep 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS7B8250EVM — TPS7B8250 Evaluierungsmodul für Hochspannungs-LDO-Regler mit extrem niedrigem IQ, 300 mA

The TPS7B8250EVM evaluation module (EVM) lets you evaluate the operation and performance of the TPS7B82-Q1 device. The TPS7B82-Q1 device is a low-dropout (LDO) linear regulator designed for up to 40-V VIN with a 300-mA (maximum) output current. With only 2.7-μA typical quiescent current at (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Evaluierungsplatine

TPS7B82EVM-024 — TPS7B82-Q1 300-mA-Hochspannungs-LDO-Linearregler mit extrem niedrigem IQ-Wert Evaluierungsmodul

The TPS7B82EVM-024 evaluation module (EVM) is designed for a typical configuration to evaluate the operation and performance of the TPS7B82-Q1, which is an automotive 300-mA high-voltage ultra-low-IQ low-dropout (LDO) linear regulator.

TPS7B82EVM-024 is configured to be a reference design for (...)

Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationsmodell

TPS7B8233-Q1 PSpice Transient Model

SLVMCR1.ZIP (60 KB) - PSpice Model
Herunterladen
Simulationsmodell

TPS7B8233-Q1 Unencrypted PSpice Transient Model

SLVMCR0.ZIP (2 KB) - PSpice Model
Herunterladen
Simulationsmodell

TPS7B8250-Q1 PSpice Transient Model

SLVMC71.ZIP (58 KB) - PSpice Model
Herunterladen
Simulationsmodell

TPS7B8250-Q1 Unencrypted PSpice Transient Model

SLVMC70.ZIP (2 KB) - PSpice Model
Herunterladen
Simulationsmodell

TPS7B8xQDRVRQ1 PSPICE Model

SBVM946.ZIP (45 KB) - IBIS Model
Herunterladen

Viele TI-Referenzdesigns beinhalten TPS7B82-Q1

Mit unserem Referenzdesign-Auswahltool können Sie die für Ihre Anwendung und Ihre Parameter am besten geeigneten Designs durchsehen und ermitteln.

Referenzdesigns anzeigen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (PWP) 14 Ultra Librarian
HVSSOP (DGN) 8 Ultra Librarian
TO-252 (KVU) 5 Ultra Librarian
WSON (DRV) 6 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos