Startseite Schnittstelle USB-ICs USB-Typ-C- und USB-Stromversorgungs-ICs

TUSB542

AKTIV

5-Gbps-USB 3.1 Gen1 Typ-C 2:1-Mux und Redriver

Produktdetails

Function USB 3.0 Type Active mux Alternate mode No External power-path control No Data role DFP, DRD, UFP USB speed (Mbps) 5000 Rating Catalog Dead battery support No Operating temperature range (°C) -40 to 85
Function USB 3.0 Type Active mux Alternate mode No External power-path control No Data role DFP, DRD, UFP USB speed (Mbps) 5000 Rating Catalog Dead battery support No Operating temperature range (°C) -40 to 85
X2QFN (RWQ) 18 4.8 mm² 2.4 x 2
  • Provides USB 3.1 Gen-1 5Gbps Super Speed (SS) 2:1 mux for a USB Type-C™ port
  • Supports USB Type-C cable and connector specifications
  • Ultra low-power architecture:
    • Active 100mA
    • U2/U3 1.3mA
    • No connection 300µA
  • Selectable equalization up to 9dB, de-emphasis, and output swing up to 6dB
  • Integrated termination
  • RX-detect function
  • Signal monitoring for power management
  • No host or device side requirement – supports USB-C DFP, UFP or DRP port
  • Single supply voltage 1.8V ±10%
  • Industrial temperature range of –40 – 85°C
  • Provides USB 3.1 Gen-1 5Gbps Super Speed (SS) 2:1 mux for a USB Type-C™ port
  • Supports USB Type-C cable and connector specifications
  • Ultra low-power architecture:
    • Active 100mA
    • U2/U3 1.3mA
    • No connection 300µA
  • Selectable equalization up to 9dB, de-emphasis, and output swing up to 6dB
  • Integrated termination
  • RX-detect function
  • Signal monitoring for power management
  • No host or device side requirement – supports USB-C DFP, UFP or DRP port
  • Single supply voltage 1.8V ±10%
  • Industrial temperature range of –40 – 85°C

The TUSB542 is a dual channel USB 3.1 Gen1 (5Gbps), also known as USB-C, re-driver supporting systems with USB Type-C connectors. The device offers signal conditioning plus the ability to switch the USB SS signals for the USB Type-C flippable connector. The TUSB542 can be controlled through the SEL pin by an external Configuration Channel Logic Controller to properly mux the signals.

The TUSB542 incorporates receiver equalization and transmitter de-emphasis to maintain signal integrity on both transmit and receive data paths. The receiver equalization offers multiple gain settings to overcome channel degradation from insertion loss and inter-symbol interference. To compensate for downstream transmission line losses, the output driver supports de-emphasis configuration. Additionally, automatic LFPS de-emphasis control allows for full compliance.

The TUSB542 offers low power consumption on a 1.8V supply with its ultra-low power architecture. The re-driver supports low power modes, which further reduce the idle power consumption.

The USB Type-C redriver is available in a small ultra-thin package, which is an excellent choice for many portable applications.

The TUSB542 is a dual channel USB 3.1 Gen1 (5Gbps), also known as USB-C, re-driver supporting systems with USB Type-C connectors. The device offers signal conditioning plus the ability to switch the USB SS signals for the USB Type-C flippable connector. The TUSB542 can be controlled through the SEL pin by an external Configuration Channel Logic Controller to properly mux the signals.

The TUSB542 incorporates receiver equalization and transmitter de-emphasis to maintain signal integrity on both transmit and receive data paths. The receiver equalization offers multiple gain settings to overcome channel degradation from insertion loss and inter-symbol interference. To compensate for downstream transmission line losses, the output driver supports de-emphasis configuration. Additionally, automatic LFPS de-emphasis control allows for full compliance.

The TUSB542 offers low power consumption on a 1.8V supply with its ultra-low power architecture. The re-driver supports low power modes, which further reduce the idle power consumption.

The USB Type-C redriver is available in a small ultra-thin package, which is an excellent choice for many portable applications.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
TUSB1142 AKTIV Adaptiver linearer Redriver für USB Type-C™ 3.2 10 Gbit/s und 2:1/1:2 Mux/Demux This product adds an adaptive EQ and improves the common mode

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 15
Typ Titel Datum
* Data sheet TUSB542 USB Type-CTM 5Gbps Redriver 2:1 MUX datasheet (Rev. F) PDF | HTML 13 Dez 2023
Application note Passive Mux Selection Based On Bandwidth (Rev. A) PDF | HTML 31 Jul 2024
White paper A Primer on USB Type-C and Power Delivery Applications and Requirements (Rev. B) PDF | HTML 25 Mär 2022
Technical article 6 key questions when designing for USB protocol interfaces PDF | HTML 31 Jul 2020
Application note High-Speed Layout Guidelines for Signal Conditioners and USB Hubs 14 Jun 2018
Technical article How to select the right USB Type-C™ signal switches PDF | HTML 20 Mär 2018
White paper Strengthening the USB Type-C signal chain through redrivers 21 Aug 2017
Technical article How to deliver clean USB Type-C™ signals PDF | HTML 07 Aug 2017
Technical article How to correct 10Gbps performance issues with a USB Type-C™ active redriver multip PDF | HTML 01 Dez 2016
Technical article Why use a USB Type-C™ redriver in your personal electronics designs? PDF | HTML 25 Okt 2016
White paper Alternate Mode for USB Type-C™: Going Beyond USB 26 Sep 2016
EVM User's guide TUSB542 Evaluation Module User's Guide 01 Feb 2016
Technical article How USB will enable the future of automotive infotainment PDF | HTML 08 Okt 2015
White paper Transition existing products from USB 2.0 OTG to USB Type-C 10 Jul 2015
White paper Low-cost implementation of USB Type-C 07 Jul 2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TUSB542EVM — TUSB542 2:1-Redriver-MUX für USB Typ C, 5 Gbit/s – Evaluierungsmodul

The TUSB542EVM is a dual channel USB 3.0 SuperSpeed re-driver supporting systems with Type-C connectors. The device complies with USB 3.1 spec revision 1.0 (Gen I), supporting electrical idle condition and low frequency periodic signals (LFPS) for USB power management modes.
Benutzerhandbuch: PDF
Simulationsmodell

TUSB542 IBIS AMI Model

SLLM334.ZIP (2985 KB) - IBIS-AMI Model
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
Referenzdesigns

TIDA-00728 — Frontanschluss-USB Typ-C-Extender – Referenzdesign

The Front Port Type-C extender reference design connects to an internal motherboard USB3.0 connectors and provides signal conditioning to both High-Speed and SuperSpeed signals to the remotely placed front port Type-C connector.  This module enables two fully functional USB Type-C connectors (...)
Test report: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
X2QFN (RWQ) 18 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos