The TUSB8020B-Q1 is
a two-port USB 3.0 compliant hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed
connections on the upstream port and provides SuperSpeed USB, high-speed, full-speed, or low-speed
connections on the downstream ports. When the upstream port is connected to an electrical
environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed USB
connectivity is disabled on the downstream ports. When the upstream port is connected to an
electrical environment that only supports full-speed/low-speed connections, SuperSpeed USB and
high-speed connectivity are disabled on the downstream ports.
The TUSB8020B-Q1
supports per port or ganged power switching and over-current protection, and supports battery
charging applications.
An individually port power controlled hub switches power on or off to each downstream
port as requested by the USB host. Also when an individually port power controlled hub senses an
over-current event, only power to the affected downstream port will be switched off.
A ganged hub switches on power to all its downstream ports when power is required to be
on for any port. The power to the downstream ports is not switched off unless all ports are in a
state that allows power to be removed. Also when a ganged hub senses an over-current event, power
to all downstream ports will be switched off.
The TUSB8020B-Q1
downstream ports provide support for battery charging applications by providing USB Battery
Charging 1.2 Charging Downstream Port (CDP) handshaking support. It also supports a Dedicated
Charging Port (DCP) mode when the upstream port is not connected. The DCP mode supports the USB
Battery Charging Specification and the Chinese Telecommunications Industry Standard YD/T 1591-2009.
In addition, an automatic mode provides transparent support for BC 1.2 compliant devices and
devices supporting Divider Mode charging solutions when the upstream port unconnected.
The TUSB8020B-Q1
provides terminal strap configuration for some features including battery charging support, and
also provides customization though OTP ROM, I2C EEPROM or via an
I2C/SMBus slave interface for PID, VID, and custom port and phy
configurations. Custom string support is also available when using an
I2C EEPROM or the I2C/SMBus slave
interface.
The device is available in a 48-terminal HTQFP package and is designed
for operation over the industrial temperature range of 40°C to 85°C.
The TUSB8020B-Q1 is
a two-port USB 3.0 compliant hub. It provides simultaneous SuperSpeed USB and high-speed/full-speed
connections on the upstream port and provides SuperSpeed USB, high-speed, full-speed, or low-speed
connections on the downstream ports. When the upstream port is connected to an electrical
environment that only supports high-speed or full-speed/low-speed connections, SuperSpeed USB
connectivity is disabled on the downstream ports. When the upstream port is connected to an
electrical environment that only supports full-speed/low-speed connections, SuperSpeed USB and
high-speed connectivity are disabled on the downstream ports.
The TUSB8020B-Q1
supports per port or ganged power switching and over-current protection, and supports battery
charging applications.
An individually port power controlled hub switches power on or off to each downstream
port as requested by the USB host. Also when an individually port power controlled hub senses an
over-current event, only power to the affected downstream port will be switched off.
A ganged hub switches on power to all its downstream ports when power is required to be
on for any port. The power to the downstream ports is not switched off unless all ports are in a
state that allows power to be removed. Also when a ganged hub senses an over-current event, power
to all downstream ports will be switched off.
The TUSB8020B-Q1
downstream ports provide support for battery charging applications by providing USB Battery
Charging 1.2 Charging Downstream Port (CDP) handshaking support. It also supports a Dedicated
Charging Port (DCP) mode when the upstream port is not connected. The DCP mode supports the USB
Battery Charging Specification and the Chinese Telecommunications Industry Standard YD/T 1591-2009.
In addition, an automatic mode provides transparent support for BC 1.2 compliant devices and
devices supporting Divider Mode charging solutions when the upstream port unconnected.
The TUSB8020B-Q1
provides terminal strap configuration for some features including battery charging support, and
also provides customization though OTP ROM, I2C EEPROM or via an
I2C/SMBus slave interface for PID, VID, and custom port and phy
configurations. Custom string support is also available when using an
I2C EEPROM or the I2C/SMBus slave
interface.
The device is available in a 48-terminal HTQFP package and is designed
for operation over the industrial temperature range of 40°C to 85°C.