TWL6030

NICHT FÜR NEUE DESIGNS EMPFOHLEN

Vollständig integrierter Power-Management-IC (PMIC) mit Switchmode-Ladegerät

Jetzt bestellen

Datenblatt

document-pdfAcrobat TWL6030 DM Version C datasheet (Rev. C) (Englisch)

TWL6030 wird nicht für neue Designs empfohlen

Dieses Produkt ist weiterhin für Bestandskunden erhältlich. Neue Designs sollten ein alternatives Produkt erwägen.

open-in-new

Alternativen vergleichen

TWL6030

NICHT FÜR NEUE DESIGNS EMPFOHLEN

Datenblatt

Jetzt bestellen

Produktdetails

Processor supplier

Texas Instruments

Processor name

OMAP

Vin (min) (V)

2.5

Vin (max) (V)

4.8

Vout (min) (V)

0.6

Vout (max) (V)

3.3

Iout (max) (A)

2

Features

Comm control

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Product type

Processor and FPGA

Processor supplier

Texas Instruments

Processor name

OMAP

Vin (min) (V)

2.5

Vin (max) (V)

4.8

Vout (min) (V)

0.6

Vout (max) (V)

3.3

Iout (max) (A)

2

Features

Comm control

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Product type

Processor and FPGA

FCCSP (CMR)

187

49 mm² 7 x 7

Seven highly efficient 6-MHz buck converters
- Two 0.6 to 2.1 V @ 1.6 A
- Five 0.6 to 2.1 V @ 1.0 A
11 General-purpose LDOs
- Six 1.0 to 3.3 V @ 0.2 A with battery or preregulated supply
  (One can be used as a vibrator driver.)
- One 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
- One low noise 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
- 3.3 V @ 35 mA USB LDO
- One LDO for TWL6030 internal use
- One LDO for internal and external use
USB OTG module
Backup battery charger
10-bit ADC with 17 input channels
13-bit Coulomb counter with four programmable integration periods
Low power consumption
- 5 µA in backup mode
- 20 µA in wait-on mode
- 110 µA in deep sleep, with two DCDCs active
RTC with alarm wake-up mechanism
SIM and MMC card detections
Two digital PWM outputs
Thermal monitoring
- High-temperature warning
- Thermal shutdown
Control
- Configurable power-up and power-down sequences (EPROM programmable)
- Three output signals that can be included in the start-up sequence
- Two I²C™ interfaces
- All resources configurable by I²C
Clock management
32-kHz output
Battery charger 1.5 A
- Charger for single-cell Li-Ion and Li-Polymer battery packs
- Switched mode charger with integrated power FET for up to 1.5-A current
- High-accuracy voltage and current regulation
- Safety timer and reset control
- Thermal regulation protection
- Input/output overvoltage protection
- Charging indicator LED driver
- Boost mode operation for USB OTG
- Compliant with:
  - USB 2.0
  - OTG and EH 2.0
  - YD/T 1591-2006
  - USB battery charging 1.1 and 1.2
  - Japanese battery charging requirements
Package 7 mm × 7 mm 187-pin nFBGA

Seven highly efficient 6-MHz buck converters
- Two 0.6 to 2.1 V @ 1.6 A
- Five 0.6 to 2.1 V @ 1.0 A
11 General-purpose LDOs
- Six 1.0 to 3.3 V @ 0.2 A with battery or preregulated supply
  (One can be used as a vibrator driver.)
- One 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
- One low noise 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
- 3.3 V @ 35 mA USB LDO
- One LDO for TWL6030 internal use
- One LDO for internal and external use
USB OTG module
Backup battery charger
10-bit ADC with 17 input channels
13-bit Coulomb counter with four programmable integration periods
Low power consumption
- 5 µA in backup mode
- 20 µA in wait-on mode
- 110 µA in deep sleep, with two DCDCs active
RTC with alarm wake-up mechanism
SIM and MMC card detections
Two digital PWM outputs
Thermal monitoring
- High-temperature warning
- Thermal shutdown
Control
- Configurable power-up and power-down sequences (EPROM programmable)
- Three output signals that can be included in the start-up sequence
- Two I²C™ interfaces
- All resources configurable by I²C
Clock management
32-kHz output
Battery charger 1.5 A
- Charger for single-cell Li-Ion and Li-Polymer battery packs
- Switched mode charger with integrated power FET for up to 1.5-A current
- High-accuracy voltage and current regulation
- Safety timer and reset control
- Thermal regulation protection
- Input/output overvoltage protection
- Charging indicator LED driver
- Boost mode operation for USB OTG
- Compliant with:
  - USB 2.0
  - OTG and EH 2.0
  - YD/T 1591-2006
  - USB battery charging 1.1 and 1.2
  - Japanese battery charging requirements
Package 7 mm × 7 mm 187-pin nFBGA

The TWL6030 device is an integrated power-management integrated circuit (IC) for applications powered by a rechargeable battery. The device provides seven configurable step-down converters with up to 1.6A capability for memory, processor core, I/O, auxiliary, preregulation for LDOs, etc. The device also contains 11 LDO regulators that can be supplied from a battery or a preregulated supply. Power-up/power-down controller is configurable and can support any power-up/power-down sequences (EPROM based). The real-time clock (RTC) provides a 32-kHz output buffer, second/minute/hour/day/month/year information, and alarm wake up. The TWL6030 supports 32-kHz clock generation based on a crystal oscillator. The device integrates a switched-mode charger allowing faster battery charge, higher efficiency, and less power dissipation.

The TWL6030 device generates power supplies for OMAP™ 4 processors and operates together with the TWL6040 device, which includes all audio and related detection features. For audio IC parameters, see the TWL6040 datasheet. In addition, the TWL6030 device can be used as a power management multichannel IC (PMIC) for several other processors, thanks to the programmable startup/shutdown controller and default supply voltage levels. The TWL6030 is available in an nFBGA package, 7.0 mm x 7.0 mm, with a 0.4-mm ball pitch.

shows the TWL6030 block diagram.

The TWL6030 device is an integrated power-management integrated circuit (IC) for applications powered by a rechargeable battery. The device provides seven configurable step-down converters with up to 1.6A capability for memory, processor core, I/O, auxiliary, preregulation for LDOs, etc. The device also contains 11 LDO regulators that can be supplied from a battery or a preregulated supply. Power-up/power-down controller is configurable and can support any power-up/power-down sequences (EPROM based). The real-time clock (RTC) provides a 32-kHz output buffer, second/minute/hour/day/month/year information, and alarm wake up. The TWL6030 supports 32-kHz clock generation based on a crystal oscillator. The device integrates a switched-mode charger allowing faster battery charge, higher efficiency, and less power dissipation.

The TWL6030 device generates power supplies for OMAP™ 4 processors and operates together with the TWL6040 device, which includes all audio and related detection features. For audio IC parameters, see the TWL6040 datasheet. In addition, the TWL6030 device can be used as a power management multichannel IC (PMIC) for several other processors, thanks to the programmable startup/shutdown controller and default supply voltage levels. The TWL6030 is available in an nFBGA package, 7.0 mm x 7.0 mm, with a 0.4-mm ball pitch.

shows the TWL6030 block diagram.

filter

Andere Mehrkanal-ICs (PMICs) suchen

Herunterladen

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	TWL6030 DM Version C datasheet (Rev. C)		04 Jul 2011

TWL6030

Vollständig integrierter Power-Management-IC (PMIC) mit Switchmode-Ladegerät

Ähnliche Funktionalität wie verglichener Baustein

TWL6030

Produktdetails

Technische Dokumentation

Bestellen & Qualität