UCC2800-EP

Name: UCC2800-EP
Brand: TI
SKU: UCC2800-EP
Price: 3.643 USD

AKTIV

Verbessertes Produkt – Strommodus-PWM, energieeffizient, Bicmos

Jetzt bestellen

Datenblatt

document-pdfAcrobat UCC2800/2801/2802/2803/2804/2805-EP datasheet (Rev. F) (Englisch)

UCC2800-EP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Vin (max) (V)

12

Operating temperature range (°C)

-55 to 125

Control mode

Current

Topology

Boost, Flyback, Forward

Rating

HiRel Enhanced Product

Features

Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start

Duty cycle (max) (%)

100

Vin (max) (V)

12

Operating temperature range (°C)

-55 to 125

Control mode

Current

Topology

Boost, Flyback, Forward

Rating

HiRel Enhanced Product

Features

Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Fixed frequency, Leading edge blanking, Multi-topology, Soft start

Duty cycle (max) (%)

100

SOIC (D)

8

29.4 mm² 4.9 x 6

Controlled Baseline
- One Assembly
- One Test Site
- One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product Change Notification
Qualification Pedigree
ESD Protection Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
100 µA Typical Starting Supply Current
500 µA Typical Operating Supply Current
Operation to 1 MHz
Internal Soft Start
Internal Fault Soft Start
Internal Leading-Edge Blanking of the Current Sense Signal
1 Amp Totem-Pole Output
70 ns Typical Response from Current-Sense to Gate Drive Output
1.5% Tolerance Voltage Reference
Same Pinout as UC3842 and UC3842A

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

Controlled Baseline
- One Assembly
- One Test Site
- One Fabrication Site
Extended Temperature Performance of –55°C to 125°C
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product Change Notification
Qualification Pedigree
ESD Protection Exceeds 200 V Using Machine Model (C = 200 pF, R = 0)
100 µA Typical Starting Supply Current
500 µA Typical Operating Supply Current
Operation to 1 MHz
Internal Soft Start
Internal Fault Soft Start
Internal Leading-Edge Blanking of the Current Sense Signal
1 Amp Totem-Pole Output
70 ns Typical Response from Current-Sense to Gate Drive Output
1.5% Tolerance Voltage Reference
Same Pinout as UC3842 and UC3842A

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

The UCC2800/1/2/3/4/5 family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and dc-to-dc fixed frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC2842/3/4/5 family and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC2800/1/2/3/4/5 family offers choice of maximum duty cycle and critical voltage levels. Lower reference parts such as the UCC2803 and UCC2805 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC2802 and UCC2804 make these ideal choices for use in off-line power supplies.

The UCC2800/1/2/3/4/5 family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and dc-to-dc fixed frequency current-mode switching power supplies with minimal parts count.

These devices have the same pin configuration as the UC2842/3/4/5 family and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC2800/1/2/3/4/5 family offers choice of maximum duty cycle and critical voltage levels. Lower reference parts such as the UCC2803 and UCC2805 fit best into battery operated systems, while the higher reference and the higher UVLO hysteresis of the UCC2802 and UCC2804 make these ideal choices for use in off-line power supplies.

filter

Andere AC/DC- und DC/DC-Controller (externer FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 8

	Typ	Titel	Datum
*	Data sheet	UCC2800/2801/2802/2803/2804/2805-EP datasheet (Rev. F)	20 Okt 2010
*	VID	UCC2800-EP VID V6203624	21 Jun 2016
*	VID	UCC2800-EP VID V6203624	21 Jun 2016
*	VID	UCC2800-EP VID V6203624	21 Jun 2016
*	VID	UCC2800-EP VID V6203624	21 Jun 2016
*	VID	UCC2800-EP VID V6203624	21 Jun 2016
*	VID	UCC2800-EP VID V6203624	21 Jun 2016
*	Radiation & reliability report	UCC2800/1/2/3/4/5QDREP Reliability Report	31 Aug 2011

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.