Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)

Hochspannungsschalter für nicht isolierte AC/DC-Wandlung

UCC28880 wird nicht für neue Designs empfohlen
Dieses Produkt wird zwar noch für bestehende Designs hergestellt, wir raten jedoch von seiner Verwendung für neue Designs ab. Bitte ziehen Sie eine dieser Alternativen in Erwägung:
Ähnliche Funktionalität wie verglichener Baustein
UCC28881 AKTIV 700-V-Offline-Schalter mit niedrigstem Ruhestrom Offers a lower RDSON FET for higher output power and improved efficiency.

Produktdetails

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck, Flyback Switching frequency (max) (kHz) 62 Features High voltage startup, Integrated Switch, Leading edge blanking, Light load efficiency, Low power, Overcurrent protection, Overtemperature protection, Soft start Control mode Voltage Duty cycle (max) (%) 55
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck, Flyback Switching frequency (max) (kHz) 62 Features High voltage startup, Integrated Switch, Leading edge blanking, Light load efficiency, Low power, Overcurrent protection, Overtemperature protection, Soft start Control mode Voltage Duty cycle (max) (%) 55
SOIC (D) 7 29.4 mm² 4.9 x 6
  • Integrated Power MOSFET (Switch) Rated to
    700-V Drain-to-Source Voltage
  • Integrated High-Voltage Current Source for Internal Low-Voltage Supply Generation
  • Soft Start
  • Self-Biased Switcher (Start Up and Operation Directly from Rectified Mains Voltage)
  • Supports Buck, Buck-Boost and Flyback Topologies
  • <100-μA Device Quiescent Current
  • Robust Performance with Inductor Current Runaway Prevention
  • Thermal Shutdown
  • Protection
    • Current Limit
    • Overload and Output Short Circuit
  • Integrated Power MOSFET (Switch) Rated to
    700-V Drain-to-Source Voltage
  • Integrated High-Voltage Current Source for Internal Low-Voltage Supply Generation
  • Soft Start
  • Self-Biased Switcher (Start Up and Operation Directly from Rectified Mains Voltage)
  • Supports Buck, Buck-Boost and Flyback Topologies
  • <100-μA Device Quiescent Current
  • Robust Performance with Inductor Current Runaway Prevention
  • Thermal Shutdown
  • Protection
    • Current Limit
    • Overload and Output Short Circuit

The UCC28880 integrates the controller and a 700-V power MOSFET into one monolithic device. The device also integrates a high-voltage current source, enabling start up and operation directly from the rectified mains voltage.

The low quiescent current of the device enables excellent efficiency. With the UCC28880 the most common converter topologies, such as buck, buck-boost and flyback can be built using a minimum number of external components.

The UCC28880 incorporates a soft-start feature for controlled start up of the power stage which minimizes the stress on the power-stage components.

The UCC28880 integrates the controller and a 700-V power MOSFET into one monolithic device. The device also integrates a high-voltage current source, enabling start up and operation directly from the rectified mains voltage.

The low quiescent current of the device enables excellent efficiency. With the UCC28880 the most common converter topologies, such as buck, buck-boost and flyback can be built using a minimum number of external components.

The UCC28880 incorporates a soft-start feature for controlled start up of the power stage which minimizes the stress on the power-stage components.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 11
Typ Titel Datum
* Data sheet UCC28880 700-V, 100-mA Low Quiescent Current Off-Line Converter datasheet (Rev. D) PDF | HTML 29 Mär 2016
Application note Operating UCC2888x Offline Buck in Saturation for Cost Reduction 22 Jun 2018
Application note Magnetic Immune SMPS for Single-Phase LPRF Smart Meter 28 Feb 2018
Technical article How to build a cost-competitive and robust auxiliary power supply PDF | HTML 01 Feb 2018
Application note UCC2888x Diode Selection When Configured as High Side Buck 20 Nov 2017
Technical article Unique techniques to increase controller power PDF | HTML 23 Aug 2017
Application note UCC28880, UCC28881 Audible Noise Reduction Techniques 23 Mär 2017
EVM User's guide UCC28880EVM-616 High-Side Buck Evaluation Module (Rev. C) 01 Feb 2017
Technical article Powering the IoT PDF | HTML 26 Jan 2017
White paper Redefining power management through high-voltage innovation 12 Nov 2015
EVM User's guide UCC28880EVM-615 Low-Side Buck Evaluation Module 08 Jul 2014

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

UCC28881EVM-680 — UCC28881 Offline-High-Side-Abwärtswandler – Evaluierungsmodul

The UCC28881EVM-680 evaluation module (EVM) is an offline high-voltage buck-type power supply that provides 13 VDC at a maximum output of 225 mA. The input accepts a voltage range of 85 VAC to 265 VAC.

Benutzerhandbuch: PDF
Simulationsmodell

UCC28880 TINA-TI Reference Design (Rev. A)

SLUM431A.TSC (108 KB) - TINA-TI Reference Design
Simulationsmodell

UCC28880 TINA-TI Transient Spice Model (Rev. A)

SLUM432A.ZIP (62 KB) - TINA-TI Spice Model
Simulationsmodell

UCC28880 Unencrypted PSpice Transient Model Package (Rev. E)

SLUM433E.ZIP (159 KB) - PSpice Model
Berechnungstool

SLUC625 UCC28880 Design Calculator

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC- und DC/DC-Wandler (integrierter FET)
UCC28880 Hochspannungsschalter für nicht isolierte AC/DC-Wandlung

Viele TI-Referenzdesigns beinhalten UCC28880

Mit unserem Referenzdesign-Auswahltool können Sie die für Ihre Anwendung und Ihre Parameter am besten geeigneten Designs durchsehen und ermitteln.

Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 7 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos