TMP451-Q1

ACTIVO

Sensor de temperatura local y remoto de 1.7 V con corrección de factor N, filtrado y serie R para au

alarmNotificaciones Haga su pedido ahora

Detalles del producto

Local sensor accuracy (max) 1 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 1.7 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT Supply current (max) (µA) 40 Temp resolution (max) (bps) 12 Remote channels (#) 1 Addresses 1 Rating Automotive TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 1 Type Remote Operating temperature range (°C) -40 to 125 Supply voltage (min) (V) 1.7 Interface type I2C, SMBus Supply voltage (max) (V) 3.6 Features ALERT Supply current (max) (µA) 40 Temp resolution (max) (bps) 12 Remote channels (#) 1 Addresses 1 Rating Automotive TI functional safety category Functional Safety-Capable
WSON (DQF) 8 4 mm² 2 x 2 WSON (DQW) 8 5 mm² 2.5 x 2
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • ±1°C accuracy for local and remote diode sensors
  • 0.0625°C resolution for local and remote channels
  • 1.7-V to 3.6-V supply and logic voltage range
  • 27-µA operating current, 3-µA shutdown current
  • Series resistance cancellation
  • η-factor and offset correction
  • Programmable digital filter
  • Diode fault detection
  • Two-wire and SMBus™ serial interface
  • 8-pin WSON (WDFN) packages
    • 2.50-mm × 2.50-mm with Wettable Flanks (DQW)
    • 2.00-mm × 2.00-mm (DQF)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
  • ±1°C accuracy for local and remote diode sensors
  • 0.0625°C resolution for local and remote channels
  • 1.7-V to 3.6-V supply and logic voltage range
  • 27-µA operating current, 3-µA shutdown current
  • Series resistance cancellation
  • η-factor and offset correction
  • Programmable digital filter
  • Diode fault detection
  • Two-wire and SMBus™ serial interface
  • 8-pin WSON (WDFN) packages
    • 2.50-mm × 2.50-mm with Wettable Flanks (DQW)
    • 2.00-mm × 2.00-mm (DQF)

The TMP451-Q1 device is a high-accuracy, low-power remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensors are typically low-cost discrete NPN or PNP transistors, or substrate thermal transistors or diodes that are integral parts of microprocessors, microcontrollers, or FPGAs. The temperature is represented as a 12-bit digital code for both the local and the remote sensors, giving a resolution of 0.0625°C. The temperature accuracy is ±1°C (maximum) in the typical operating range for the local and the remote temperature sensors. The two-wire serial interface accepts the SMBus communication protocol.

Advanced features such as series resistance cancellation, programmable nonideality factor (η-factor), programmable offset, programmable temperature limits, and a programmable digital filter are combined to provide a robust thermal monitoring solution with improved accuracy and noise immunity.

The TMP451-Q1 device is ideal for multi-location, high-accuracy temperature measurements in a variety of automotive sub-systems. The TMP451-Q1 is available in a Wettable Flanks WSON package that provides a visual indicator of solderability to lower automatic visual inspection (AVI) time. The device is specified for operation over a supply voltage range of 1.7 V to 3.6 V and a temperature range of –40°C to 125°C.

The TMP451-Q1 device is a high-accuracy, low-power remote temperature sensor monitor with a built-in local temperature sensor. The remote temperature sensors are typically low-cost discrete NPN or PNP transistors, or substrate thermal transistors or diodes that are integral parts of microprocessors, microcontrollers, or FPGAs. The temperature is represented as a 12-bit digital code for both the local and the remote sensors, giving a resolution of 0.0625°C. The temperature accuracy is ±1°C (maximum) in the typical operating range for the local and the remote temperature sensors. The two-wire serial interface accepts the SMBus communication protocol.

Advanced features such as series resistance cancellation, programmable nonideality factor (η-factor), programmable offset, programmable temperature limits, and a programmable digital filter are combined to provide a robust thermal monitoring solution with improved accuracy and noise immunity.

The TMP451-Q1 device is ideal for multi-location, high-accuracy temperature measurements in a variety of automotive sub-systems. The TMP451-Q1 is available in a Wettable Flanks WSON package that provides a visual indicator of solderability to lower automatic visual inspection (AVI) time. The device is specified for operation over a supply voltage range of 1.7 V to 3.6 V and a temperature range of –40°C to 125°C.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 6
Tipo Título Fecha
* Data sheet TMP451-Q1 ±1°C Remote and Local Temperature Sensor With η-Factor and Offset Correction, Series-Resistance Cancellation, and Programmable Digital Filter datasheet (Rev. C) PDF | HTML 15 abr 2021
Functional safety information TMP451-Q1 Functional Safety FIT Rate and FMD (Rev. A) PDF | HTML 04 jun 2024
Application brief Improving System Reliability in Auto and Ind. Cameras w/ AccurateTemp. Sensing PDF | HTML 03 ene 2022
Application note Meeting ASIL Requirements for LIDAR Systems Using Remote Temperature Sensors PDF | HTML 16 nov 2021
Technical article How to maximize powertrain efficiency and reliability with high-accuracy temperatu PDF | HTML 10 may 2021
Technical article How to enable thermal safety for automotive infotainment and cluster systems PDF | HTML 15 oct 2019

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

AWRL6844EVM — Placa de módulo de evaluación AWRL6844

La AWRL6844EVM de Texas Instruments es una placa de evaluación fácil de usar para el sensor de radar automotriz mmWave AWRL6844, con funcionamiento independiente y con conectividad directa con el DCA1000EVM para la captura del convertidor analógico a digital (ADC) sin procesar y el desarrollo del (...)

Guía del usuario: PDF | HTML
Placa de evaluación

TMP451EVM — Módulo de evaluación TMP451 de sensor de temperatura local y remoto de 1.7 V

The TMP451EVM is an evaluation module that is used to fully evaluate the TMP451, a 1.8V remote temperature sensor. The TMP451 has the capability of measuring remote temperatures and on-chip temperatures. The TMP451 is an integrated circuit that provides 1˚C accuracy temperature measurement with (...)
Guía del usuario: PDF
Soporte de software

SBOC436 TMP451EVM Software

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Sensores de temperatura digitales
TMP451 Sensor de temperatura local y remoto de 1.7 V con corrección de factor N, filtrado y serie R TMP451-Q1 Sensor de temperatura local y remoto de 1.7 V con corrección de factor N, filtrado y serie R para au
Desarrollo de hardware
Placa de evaluación
TMP451EVM Módulo de evaluación TMP451 de sensor de temperatura local y remoto de 1.7 V
Soporte de software

SBOC437 TMP451EVM Source Code

Productos y hardware compatibles

Productos y hardware compatibles

Productos
Sensores de temperatura digitales
TMP451 Sensor de temperatura local y remoto de 1.7 V con corrección de factor N, filtrado y serie R TMP451-Q1 Sensor de temperatura local y remoto de 1.7 V con corrección de factor N, filtrado y serie R para au
Desarrollo de hardware
Placa de evaluación
TMP451EVM Módulo de evaluación TMP451 de sensor de temperatura local y remoto de 1.7 V
Modelo de simulación

TMP451 IBIS Model

SBOM836.ZIP (93 KB) - IBIS Model
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WSON (DQF) 8 Ultra Librarian
WSON (DQW) 8 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos