Inicio Gestión de la energía Interruptores de alimentación y controladores de puertos de carga USB
Inicio
Gestión de la energía
Interruptores de alimentación y controladores de puertos de carga USB

TPS2550

NO RECOMENDADO PARA NUEVOS DISEÑOS

Interruptor de distribución de alimentación ajustable, activa-baja, corriente constante y corriente

Haga su pedido ahora
Hoja de datos
TPS2550 no se recomienda para nuevos diseños
Este producto sigue estando disponible para los clientes existentes. Los nuevos diseños deben considerar un producto alternativo.
open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS2552 ACTIVO Interruptor de alimentación USB de 85 mΩ, ILIMIT ajustable de 0.075-1.7 A Interruptor de alimentació This product is more accurate, SBS 1.1 Compliant, has faster communication capability and has a maintained design environment.

TPS2550

NO RECOMENDADO PARA NUEVOS DISEÑOS
Hoja de datos Haga su pedido ahora

Detalles del producto

Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.1 Current limit (A) 0.1 to 1.1 Operating temperature range (°C) -40 to 85 Enable Active Low Number of switches 1 Current limit accuracy at 1 A 30% (700mA min / 1300mA max) Rating Catalog
Product type Adjustable current limit, Power switch Vin (min) (V) 2.5 Vin (max) (V) 6.5 Continuous current (max) (A) 1.1 Current limit (A) 0.1 to 1.1 Operating temperature range (°C) -40 to 85 Enable Active Low Number of switches 1 Current limit accuracy at 1 A 30% (700mA min / 1300mA max) Rating Catalog
  • Adjustable current-limit, 100 mA–1100 mA
  • Fast overcurrent response - 2 µS typical
  • 94-mΩ high-side MOSFET (DBV package)
  • Reverse input-output voltage protection
  • Operating range: 2.5 V to 6.5 V
  • Deglitched fault report
  • 1-µA maximum standby supply current
  • Junction temperature range: –40°C to 125°C
  • Built-in soft-start
  • 15 kV ESD protection (with external capacitance)
  • UL listed – file No. E169910
  • Current-limit resistor calculator – SLVC163
  • Adjustable current-limit, 100 mA–1100 mA
  • Fast overcurrent response - 2 µS typical
  • 94-mΩ high-side MOSFET (DBV package)
  • Reverse input-output voltage protection
  • Operating range: 2.5 V to 6.5 V
  • Deglitched fault report
  • 1-µA maximum standby supply current
  • Junction temperature range: –40°C to 125°C
  • Built-in soft-start
  • 15 kV ESD protection (with external capacitance)
  • UL listed – file No. E169910
  • Current-limit resistor calculator – SLVC163

The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.

The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.

The TPS2550/51 power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered, incorporating a 100-mΩ, N-channel MOSFET in a single package. The current-limit threshold is user adjustable between 100 mA and 1.1 A via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during switching.

The device limits the output current to a desired level by switching into a constant-current mode when the output load exceeds the current-limit threshold or a short is present. An internal reverse-voltage detection comparator disables the power-switch in the event that the output voltage is driven higher than the input to protect devices on the input side of the switch. The FAULT logic output asserts low during both overcurrent and reverse-voltage conditions.
filter Buscar otro/a Interruptores de alimentación y controladores de puertos de carga USB
Descargar

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 1
Tipo Título Fecha
* Data sheet TPS255x Adjustable Current-Limited Power-Distribution Switches datasheet (Rev. C) PDF | HTML 09 oct 2023

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje