Inicio Gestión de la energía Convertidores de CA/CC y CC/CC (FET integrado)
Inicio
Gestión de la energía
Convertidores de CA/CC y CC/CC (FET integrado)
NUEVO

TPS513885

ACTIVO

Convertidor reductor síncrono con entrada de 5.5 V a 24 V y 12 A, y salida fija de 5.15 V

Haga su pedido ahora
Hoja de datos

TPS513885

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Rating Catalog Operating temperature range (°C) -20 to 125 Type Converter Iout (max) (A) 12 Vin (min) (V) 5.5 Vin (max) (V) 24 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Features Enable, Fixed Output, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, UVLO Fixed Control mode D-CAP3 Vout (min) (V) 5.15 Vout (max) (V) 5.15 Iq (typ) (µA) 90 Duty cycle (max) (%) 98
Rating Catalog Operating temperature range (°C) -20 to 125 Type Converter Iout (max) (A) 12 Vin (min) (V) 5.5 Vin (max) (V) 24 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Features Enable, Fixed Output, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, UVLO Fixed Control mode D-CAP3 Vout (min) (V) 5.15 Vout (max) (V) 5.15 Iq (typ) (µA) 90 Duty cycle (max) (%) 98
VQFN-HR (VAB) 13 12 mm² 4 x 3
  • 5.5V to 24V input voltage range
  • 5.15V output voltage
  • Integrated 9.2mΩ and 4.5mΩ FETs
  • Supports 12A continuous output current
  • 90uA low quiescent current
  • ± 1.0% ouput voltage accuracy (25°C)
  • D-CAP3™ control mode architecture control for fast transient response
  • Support POSCAP and all MLCC output capacitor
  • Selectable Eco-mode and Out-of-Audio™ mode with dynamic change
  • ULQ™ extended battery life during system standby
  • Built-in output discharge function
  • Integrated power-good indicator
  • 560kHz and 920kHz selectable switching frequency
  • Fixed 0.9ms soft-start time
  • Large duty cycle operation
  • Cycle-by-cycle overcurrent and negative overcurrent protection
  • Latched output OV and UV protections
  • Non-latched UVLO and OT protections
  • –20°C to 125°C operating junction temperature
  • 13-pin 3.0mm × 4.0mm HotRod™ VQFN package
  • Create a custom design using the TPS513885 with the WEBENCH® Power Designer
  • 5.5V to 24V input voltage range
  • 5.15V output voltage
  • Integrated 9.2mΩ and 4.5mΩ FETs
  • Supports 12A continuous output current
  • 90uA low quiescent current
  • ± 1.0% ouput voltage accuracy (25°C)
  • D-CAP3™ control mode architecture control for fast transient response
  • Support POSCAP and all MLCC output capacitor
  • Selectable Eco-mode and Out-of-Audio™ mode with dynamic change
  • ULQ™ extended battery life during system standby
  • Built-in output discharge function
  • Integrated power-good indicator
  • 560kHz and 920kHz selectable switching frequency
  • Fixed 0.9ms soft-start time
  • Large duty cycle operation
  • Cycle-by-cycle overcurrent and negative overcurrent protection
  • Latched output OV and UV protections
  • Non-latched UVLO and OT protections
  • –20°C to 125°C operating junction temperature
  • 13-pin 3.0mm × 4.0mm HotRod™ VQFN package
  • Create a custom design using the TPS513885 with the WEBENCH® Power Designer

The device is a monolithic, 12A, synchronous buck converter with integrated MOSFETs that enable high efficiency and offer ease-of-use with minimum external component count for space-conscious power systems.

The TPS513885 employs D-CAP3 control mode that provides fast transient response and excellent line and load regulation with internal compensation. The ULQ extended battery life feature is extremely beneficial for long battery life in low power operation. The large duty operation greatly improves the load transient performance when input voltage is low.

The EN pin can be used to set Eco-mode or Out-of-Audio (OOA) mode for light-load operation. The Eco-mode maintains high efficiency during light load operation. The OOA mode keeps the switching frequency above audible frequency with minimum reduction in efficiency. The EN pin can be toggled dynamically, even when the converter is in operation.

The TPS513885 integrates a power-good indicator and provides an output discharge function. The TPS513885 provides complete protection including OVP, UVP, OCP, OTP, and UVLO. The device is available in a 13-pin, 3.0mm × 4.0mm HotRod package, and the junction temperature is specified from –20°C to 125°C.

The device is a monolithic, 12A, synchronous buck converter with integrated MOSFETs that enable high efficiency and offer ease-of-use with minimum external component count for space-conscious power systems.

The TPS513885 employs D-CAP3 control mode that provides fast transient response and excellent line and load regulation with internal compensation. The ULQ extended battery life feature is extremely beneficial for long battery life in low power operation. The large duty operation greatly improves the load transient performance when input voltage is low.

The EN pin can be used to set Eco-mode or Out-of-Audio (OOA) mode for light-load operation. The Eco-mode maintains high efficiency during light load operation. The OOA mode keeps the switching frequency above audible frequency with minimum reduction in efficiency. The EN pin can be toggled dynamically, even when the converter is in operation.

The TPS513885 integrates a power-good indicator and provides an output discharge function. The TPS513885 provides complete protection including OVP, UVP, OCP, OTP, and UVLO. The device is available in a 13-pin, 3.0mm × 4.0mm HotRod package, and the junction temperature is specified from –20°C to 125°C.

filter Buscar otro/a Convertidores de CA/CC y CC/CC (FET integrado)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet TPS513885 5.5V to 24V, 12A, Synchronous Buck Converter datasheet (Rev. A) PDF | HTML 28 jun 2024
EVM User's guide TPS513885 Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 03 jul 2024
Certificate TPS513885EVM EU Declaration of Conformity (DoC) 24 abr 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS513885EVM — Módulo de evaluación TPS513885

El módulo de evaluación (EVM) TPS513885 es un circuito totalmente ensamblado y probado para evaluar el convertidor reductor TPS513885. Este módulo de evaluación (EVM) funciona con una entrada típica de 19.5 V y proporciona una salida de 5.15 V a 12 A. También incluye terminales de inyección de (...)
Guía del usuario: PDF | HTML
No disponible en TI.com
Modelo de simulación

TPS513885 PSpice Transient Model

SLUM900.ZIP (152 KB) - PSpice Model
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
VQFN-HR (VAB) 13 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos