Inicio Gestión de la energía Circuitos integrados multicanal (PMIC)
Inicio
Gestión de la energía
Circuitos integrados multicanal (PMIC)

TPS68470

ACTIVO

Administración de energía IC (PMIC) con controlador LED flash y generación de reloj de referencia pa

Haga su pedido ahora
Hoja de datos

TPS68470

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Regulated outputs (#) 8 Configurability Factory programmable, Software configurable Vin (min) (V) 2.97 Vin (max) (V) 3.63 Vout (min) (V) 0.875 Vout (max) (V) 3.1 Iout (max) (A) 1 Features Enable, Enable pin, I2C control, Thermal shutdown, UVLO fixed Step-up DC/DC converter 1 Step-down DC/DC converter 1 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 6 Iq (typ) (mA) 0.1 Rating Catalog Switching frequency (max) (kHz) 6000 Operating temperature range (°C) 0 to 85 Processor supplier Generic Processor name Generic Switching frequency (typ) (kHz) 5200 Product type Camera sensor
Regulated outputs (#) 8 Configurability Factory programmable, Software configurable Vin (min) (V) 2.97 Vin (max) (V) 3.63 Vout (min) (V) 0.875 Vout (max) (V) 3.1 Iout (max) (A) 1 Features Enable, Enable pin, I2C control, Thermal shutdown, UVLO fixed Step-up DC/DC converter 1 Step-down DC/DC converter 1 Step-down DC/DC controller 0 Step-up DC/DC controller 0 LDO 6 Iq (typ) (mA) 0.1 Rating Catalog Switching frequency (max) (kHz) 6000 Operating temperature range (°C) 0 to 85 Processor supplier Generic Processor name Generic Switching frequency (typ) (kHz) 5200 Product type Camera sensor
DSBGA (YFF) 56 10.7999999999999988 mm² 3 x 3.5999999999999996
  • High-Efficiency Buck Converter
    • Output Current up to 500 mA
    • Output Voltage Selectable: 0.9 V to 1.95 V
  • Dual Flash LED Driver
    • High-Efficiency Boost Converter
      • Adaptive Output Voltage Regulation Based on LED Vf
    • Low Side LED Current Drivers
      • Two 1-A Current Drivers
      • LED Temperature Monitoring
      • Open/Short LED Detection/Protection
      • Controlled LED Current Ramp-Up/Down
  • Linear Regulator for Sensor Analog Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 200 mA
  • Linear Regulator for IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for VCM (Voice Coil Motor) Driver Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 500 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for Sensor IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Clock Generation
    • Programmable PLL
    • Crystal Oscillator
  • I2C Interface
  • 7 GPIOs
  • System Reset
  • Operating Temperature Range: 0°C to 85°C
  • DSBGA with Package Height of 0.625 mm
  • High-Efficiency Buck Converter
    • Output Current up to 500 mA
    • Output Voltage Selectable: 0.9 V to 1.95 V
  • Dual Flash LED Driver
    • High-Efficiency Boost Converter
      • Adaptive Output Voltage Regulation Based on LED Vf
    • Low Side LED Current Drivers
      • Two 1-A Current Drivers
      • LED Temperature Monitoring
      • Open/Short LED Detection/Protection
      • Controlled LED Current Ramp-Up/Down
  • Linear Regulator for Sensor Analog Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 200 mA
  • Linear Regulator for IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for VCM (Voice Coil Motor) Driver Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 500 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Linear Regulator for Auxiliary Power
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 50 mA
  • Linear Regulator for Sensor IO Supply
    • Output Voltage Programmable from 0.875 V to 3.1 V with 17.8-mV Steps
    • Output Current up to 150 mA
  • Clock Generation
    • Programmable PLL
    • Crystal Oscillator
  • I2C Interface
  • 7 GPIOs
  • System Reset
  • Operating Temperature Range: 0°C to 85°C
  • DSBGA with Package Height of 0.625 mm

The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates the clock for the image sensor, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators . The TPS68470 is capable of generating all needed power rails in a CCM.

The CORE voltage regulator is a state of the art buck converter which can be used for the image sensor digital supply. An LDO (LDO_ANA) can be used for the image sensor analog supply.

The TPS68470 also has a high efficiency boost converter to support two 1A LED flash drivers. The LED currents are controlled with regulated low side current sources.

The TPS68470 has five other LDOs. Two of them can be used for generic and sensor IO supply voltage generation (LDO_IO and LDO_S_IO). One can be dedicated to the VCM driver supply (LDO_VCM). The remaining two are auxiliary LDOs (LDO_AUX1 and LDO_AUX2).

The TPS68470 device is an advanced power management unit that powers a Compact Camera Module (CCM), generates the clock for the image sensor, drives a dual LED for Flash and incorporates two LED drivers for general purpose indicators . The TPS68470 is capable of generating all needed power rails in a CCM.

The CORE voltage regulator is a state of the art buck converter which can be used for the image sensor digital supply. An LDO (LDO_ANA) can be used for the image sensor analog supply.

The TPS68470 also has a high efficiency boost converter to support two 1A LED flash drivers. The LED currents are controlled with regulated low side current sources.

The TPS68470 has five other LDOs. Two of them can be used for generic and sensor IO supply voltage generation (LDO_IO and LDO_S_IO). One can be dedicated to the VCM driver supply (LDO_VCM). The remaining two are auxiliary LDOs (LDO_AUX1 and LDO_AUX2).
filter Buscar otro/a Circuitos integrados multicanal (PMIC)
Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 3
Tipo Título Fecha
* Data sheet TPS68470 Power Management Unit with LED Flash Driver and Reference Clock Generation for Compact Camera Module (CCM) Applications datasheet (Rev. B) PDF | HTML 19 ene 2017
Technical article Use PMICs to extend battery life in portable applications PDF | HTML 08 sep 2016
EVM User's guide TPS68470EVM User's Guide 10 sep 2014

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS68470EVM-089 — Módulo de evaluación TPS68470EVM-089

The TPS68470EVM-089 evaluation module is a fully assembled and tested circuit for evaluating the TPS68470 8-Channel Power Management IC.

Guía del usuario: PDF
Solicitar
Archivo Gerber

TPS68470 EVM Design Files

SLVC664.ZIP (968 KB)
Descargar
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
DSBGA (YFF) 56 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos