평가 모듈(EVM)용 GUI
FDC2112-Q1
- Qualified for automotive applications
- AEC-Q100 qualified with the following results:
- Device temperature grade 1: –40°C to +125°C ambient operating temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C5
- EMI-resistant architecture
- Maximum output rates (one active channel):
- 13.3kSPS (FDC2112-Q1, FDC2114-Q1)
- 4.08kSPS (FDC2212-Q1, FDC2214-Q1)
- Maximum input capacitance: 250nF (at 10kHz with 1mH inductor)
- Sensor excitation frequency: 10kHz to 10MHz
- Number of channels: 2, 4
- Resolution: up to 28 bits
- RMS noise: 0.3fF at 100SPS and fSENSOR = 5MHz
- Supply voltage: 2.7V to 3.6V
- power consumption: active: 2.1mA
- Low-power sleep mode: 35µA
- Shutdown: 200nA
- Interface: I2C
- Temperature range: –40°C to +125°C
Capacitive sensing is a low-power, high-resolution contactless sensing technique that can be applied to a variety of applications ranging from proximity detection to gesture recognition. The sensor in a capacitive sensing system is any metal or conductor, allowing for highly flexible system design.
The main challenge limiting sensitivity in capacitive sensing applications is noise susceptibility of the sensors. With the FDC2x1x-Q1 resonant sensing architecture, performance can be maintained even in presence of fluorescent light.
The FDC2x1x-Q1 is a multi-channel family of high-resolution, high-speed capacitance-to-digital converters for implementing capacitive sensing solutions. The devices employ an innovative narrow-band based architecture to offer high rejection of noise while providing high resolution at high speed. The devices support a wide excitation frequency range, offering flexibility in system design.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
9개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | FDC2x1x-Q1 Multi-Channel, High Resolution Capacitance-to-Digital Converter for Capacitive Sensing Applications datasheet (Rev. A) | PDF | HTML | 2024/10/10 |
| Application note | Common Inductive and Capacitive Sensing Applications (Rev. B) | PDF | HTML | 2021/06/22 | |
| Application note | Simulate Inductive Sensors Using FEMM (Finite Element Method Magnetics) (Rev. A) | PDF | HTML | 2021/06/16 | |
| Application note | Capacitive Proximity Sensing Using FDC2x1y (Rev. A) | 2017/10/20 | ||
| EVM User's guide | FDC2114 and FDC2214 EVM User’s Guide (Rev. A) | 2016/09/14 | ||
| Application note | Ground Shifting in Capacitive Sensing Applications | PDF | HTML | 2016/05/27 | |
| Application note | Power Consumption Analysis for Low Power Capacitive Sensing Applications | PDF | HTML | 2016/01/18 | |
| Application note | Derivative Integration Algorithm for Proximity Sensing | 2015/09/29 | ||
| Application note | Capacitive Sensing: Direct vs Remote Liquid Level Sensing Performance Analysis (Rev. A) | 2015/07/24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
FDC2114EVM — 2개의 커패시티브 센서 평가 모듈이 포함된 FDC2114
The FDC2114 evaluation module demonstrates capacitive sensing technology to detect the presence of a conductive or non-conductive target. The evaluation module includes two PCB capacitive sensors that connect to two of the four channels of the FDC2114. An MSP430 microcontroller is used to interface (...)
사용 설명서: PDF
지원 소프트웨어
SNOC033 — FDC211x/FDC221x Current Consumption Estimator
지원되는 제품 및 하드웨어
제품
신호 조절기
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DNT) | 12 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치