이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
HDC3020 활성 0.5% RH 디지털 습도 센서, 0.19% 장기 드리프트, 400nA, 4초 응답 시간, NIST 추적 가능 Higher accuracy (±0.5 %RH) in smaller QFN package (2.5 mm × 2.5 mm)
HDC3020-Q1 활성 오토모티브 0.5% RH 디지털 습도 센서, 0.19% 장기 드리프트, 400nA, 4초 응답 시간 Automotive (Q100) qualified, higher accuracy (±0.5 %RH) in QFN (2.5 mm × 2.5 mm)
HDC3021 활성 탈착식 테이프 커버가 있는 0.5% RH 디지털 습도 센서 Higher accuracy (±0.5 %RH) in smaller QFN with removable tape for conformal coating
HDC3022 활성 영구 IP67 필터가 있는 0.5% RH 디지털 습도 센서 Higher accuracy (±0.5 %RH) in smaller QFN with permanent IP67 filter

제품 상세 정보

Relative humidity accuracy (typ) (%RH) 2 Temperature accuracy (typ) (°C) 0.2 Relative humidity operating range (typ) (%RH) 0 to 100 Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 3.6 Operating temperature range (°C) -40 to 125 Interface type I2C Rating Catalog
Relative humidity accuracy (typ) (%RH) 2 Temperature accuracy (typ) (°C) 0.2 Relative humidity operating range (typ) (%RH) 0 to 100 Supply voltage (min) (V) 1.62 Supply voltage (max) (V) 3.6 Operating temperature range (°C) -40 to 125 Interface type I2C Rating Catalog
DSBGA (YPA) 6 2.1316 mm² 1.46 x 1.46
  • Relative humidity range: 0% to 100%
  • Humidity accuracy: ±2%
  • Sleep current: 50 nA
  • Average supply current (1 measurement per second)
    • RH only (11 bit): 300 nA
    • RH (11 bit) + temperature (11 bit): 550 nA
  • Temperature range:
    • Operating: –40°C to 85°C
    • Functional: –40°C to 125°C
  • Temperature accuracy: ±0.2°C typical
  • Supply voltage: 1.62 V to 3.6 V
  • Programmable sampling rate (5 Hz, 2 Hz, 1 Hz, 0.2 Hz, 0.1 Hz, 1/60 Hz, 1/120 Hz) or trigger on demand
  • I2C interface
  • Relative humidity range: 0% to 100%
  • Humidity accuracy: ±2%
  • Sleep current: 50 nA
  • Average supply current (1 measurement per second)
    • RH only (11 bit): 300 nA
    • RH (11 bit) + temperature (11 bit): 550 nA
  • Temperature range:
    • Operating: –40°C to 85°C
    • Functional: –40°C to 125°C
  • Temperature accuracy: ±0.2°C typical
  • Supply voltage: 1.62 V to 3.6 V
  • Programmable sampling rate (5 Hz, 2 Hz, 1 Hz, 0.2 Hz, 0.1 Hz, 1/60 Hz, 1/120 Hz) or trigger on demand
  • I2C interface

The HDC2010 is an integrated humidity and temperature sensor that provides high accuracy measurements with very low power consumption, in an ultra-compact WLCSP (Wafer Level Chip Scale Package). The sensing element of the HDC2010 is placed on the bottom part of the device, which makes the HDC2010 more robust against dirt, dust, and other environmental contaminants. The capacitive-based sensor includes new integrated digital features and a heating element to dissipate condensation and moisture. The HDC2010 digital features include programmable interrupt thresholds to provide alerts/system wake-ups without requiring a microcontroller to be continuously monitoring the system. This, combined with programmable sampling intervals, low inherent power consumption, and support for 1.8-V supply voltage, make the HDC2010 well suited for battery-operated systems.

The HDC2010 provides high accuracy measurement capability for a wide range of environmental monitoring applications and Internet of Things (IoT) such as smart thermostats, smart home assistants and wearables. The HDC2010 can also be used to provide critical temperature and humidity data for cold chain transportation and storage of perishable goods to help ensure products like food and pharmaceuticals arrive fresh.

The HDC2010 is factory-calibrated to 0.2°C temperature accuracy and 2% relative humidity accuracy and includes a heating element to burn away condensation and moisture for increased reliability. The HDC2010 supports operation from –40°C to 125°C and from 0% to 100% relative humidity.

The HDC2010 is an integrated humidity and temperature sensor that provides high accuracy measurements with very low power consumption, in an ultra-compact WLCSP (Wafer Level Chip Scale Package). The sensing element of the HDC2010 is placed on the bottom part of the device, which makes the HDC2010 more robust against dirt, dust, and other environmental contaminants. The capacitive-based sensor includes new integrated digital features and a heating element to dissipate condensation and moisture. The HDC2010 digital features include programmable interrupt thresholds to provide alerts/system wake-ups without requiring a microcontroller to be continuously monitoring the system. This, combined with programmable sampling intervals, low inherent power consumption, and support for 1.8-V supply voltage, make the HDC2010 well suited for battery-operated systems.

The HDC2010 provides high accuracy measurement capability for a wide range of environmental monitoring applications and Internet of Things (IoT) such as smart thermostats, smart home assistants and wearables. The HDC2010 can also be used to provide critical temperature and humidity data for cold chain transportation and storage of perishable goods to help ensure products like food and pharmaceuticals arrive fresh.

The HDC2010 is factory-calibrated to 0.2°C temperature accuracy and 2% relative humidity accuracy and includes a heating element to burn away condensation and moisture for increased reliability. The HDC2010 supports operation from –40°C to 125°C and from 0% to 100% relative humidity.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
HDC2021 활성 2% RH 초저전력 디지털 상대 습도 센서, 테이프 커버 Removable tape cover, p2p and software compatible
HDC2022 활성 2% RH 초저전력 디지털 상대 습도 센서, IP67 필터 Permanent IP67 filter, p2p and software compatible
HDC2080 활성 2% RH 초저전력 디지털 상대 습도 센서, 인터럽트/DRDY QFN package, software compatible

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
17개 모두 보기
유형 직함 날짜
* Data sheet HDC2010 Low-Power Humidity and Temperature Digital Sensors datasheet (Rev. D) PDF | HTML 2021/02/02
* User guide HDC20XX Silicon User's Guide PDF | HTML 2020/11/30
Application brief Using RH to Derive Vapor Pressure, Dew Point, Absolute Humidity, and Enthalpy PDF | HTML 2023/02/09
User guide BOOSTXL-BASSENSORS User's Guide (Rev. B) 2022/09/01
Application brief Improving System Reliability in Auto and Ind. Cameras w/ AccurateTemp. Sensing PDF | HTML 2022/01/03
White paper 85°C/85% RH Accelerated Life Test Impact on Humidity Sensors (Rev. A) PDF | HTML 2021/09/07
Technical article Why long-term consistent performance matters for relative humidity sensors PDF | HTML 2021/06/21
Application note Is a Protective Cover Needed for Humidity Sensors? PDF | HTML 2021/04/21
Technical article How accurate sensing in HVAC systems improves efficiency and saves consumers money PDF | HTML 2021/01/26
Technical article Interface to sensors in seconds with ASC Studio PDF | HTML 2020/11/12
White paper Simplifying Signal Chain Design for High Performance in Small Systems 2020/10/22
Application brief Self Diagnostics and Environmental Sensing in IP Network Cameras 2019/10/10
Application note Low-Power Design Techniques for Temperature-Sensing Applications 2019/06/06
Application note Programming the HDC20X0 Devices 2018/08/29
Application brief Humidity Sensors 2018/07/09
Application note Humidity Sensor: Storage and Handling Guidelines 2017/08/28
Application note Optimizing Placement and Routing for Humidity Sensors (Rev. A) 2017/03/06

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BOOSTXL-BASSENSORS — 건물 자동화 센서 BoosterPack 모듈

The BOOSTXL-BASSENSORS BoosterPack plug-in module is an easy way to add digital sensors to your LaunchPad development kit. MCU Launchpad developers can use this BoosterPack module to start developing sensor applications using the on-board temperature, humidity, ambient light, and hall-effect (...)
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

BP-BASSENSORSMKII — 건물 자동화 센서 BoosterPack 모듈

The BP-BASSENSORSMKII BoosterPack™ plug-in module is an easy way to add digital sensors to your LaunchPad™ development kit. MCU Launchpad developers can use this BoosterPack plug-in module to start developing sensor applications using the on-board temperature, humidity, ambient light (...)
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

HDC2010EVM — HDC2010 저전력 습도 및 온도 센서 평가 모듈

The HDC2010EVM evaluation kit is a plug and play system to test and evaluate the HDC2010 humidity and temperature sensor. The evaluation module (EVM) utilizes a USB interface for control and data streaming, and can be plugged into a PC USB port. With the simple GUI, humidity and temperature (...)
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

HDC2010METER-EVM — 저전력 습도 및 온도 디지털 측정기

The HDC2010 is an integrated humidity and temperature sensor that provides high accuracy measurements with very low power consumption, in an ultra-compact WLCSP (Wafer Level Chip Scale Package). The HDC2010METER is an HDC2010 demonstration board from Texas Instruments which provides a convenient (...)
사용 설명서: PDF
TI.com에서 구매 불가
드라이버 또는 라이브러리

SNAC075 HDC2010 Arduino Library v1.0

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
습도 센서
HDC2010 2% RH 초소형 저전력 디지털 상대 습도 센서
평가 모듈(EVM)용 GUI

SNOC028 Sensing Solutions EVM GUI Tool v1.10.0

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
습도 센서
HDC1000 온도 센서가 통합된 저전력, 3% 정확도의 디지털 습도 센서 HDC1050 온도 센서를 갖춘 ±3% 저전력, 디지털 습도 센서 HDC2010 2% RH 초소형 저전력 디지털 상대 습도 센서 HDC2080 2% RH 초저전력 디지털 상대 습도 센서, 인터럽트/DRDY
유도성 센서 AFE
LDC1001-Q1 오토모티브, 5V, 등급 0, 인덕턴스-디지털 컨버터 LDC1041 1채널, 5V, 24비트 L, 8비트 Rp, 인덕턴스-디지털 컨버터 LDC1051 1채널, 5V, 8비트 Rp, 인덕턴스-디지털 컨버터 LDC1101 고속 애플리케이션용 1채널 1.8V, 24비트 L, 16비트 Rp, 인덕턴스-디지털 컨버터 LDC1312 2채널, 12비트, 범용 인덕턴스-디지털 컨버터 LDC1312-Q1 2채널, 12비트, 범용 오토모티브 인덕턴스-디지털 컨버터 LDC1314 4채널, 12비트, 범용 인덕턴스-디지털 컨버터 LDC1314-Q1 4채널, 12비트, 범용 차량용 인덕턴스-디지털 컨버터 LDC1612 2채널, 28비트, 고해상도 인덕턴스-디지털 컨버터 LDC1612-Q1 2채널, 28비트, 고해상도 차량용 인덕턴스-디지털 컨버터 LDC1614 4채널, 28비트, 고해상도 인덕턴스-디지털 컨버터 LDC1614-Q1 4채널, 28비트, 고해상도 차량용 인덕턴스-디지털 컨버터 LDC2112 저전력 터치 버튼에 대한 기준 추적을 지원하는 2채널 인덕턴스-디지털 컨버터 LDC2114 저전력 터치 버튼에 대한 기준 추적을 지원하는 4채널 인덕턴스-디지털 컨버터
신호 조절기
FDC1004 능동 쉴드 드라이버를 갖춘 4채널, 16비트, 커패시턴스-디지털 컨버터 FDC1004-Q1 능동 쉴드 드라이버를 갖춘 4채널, 16비트, 오토모티브 커패시턴스-디지털 컨버터 FDC2112 2채널, 12비트, 커패시턴스-디지털 컨버터 FDC2112-Q1 2채널, 12비트, 오토모티브 커패시턴스-디지털 컨버터 FDC2114 4채널, 12비트, 커패시턴스-디지털 컨버터 FDC2114-Q1 4채널, 12비트, 오토모티브 커패시턴스-디지털 컨버터 FDC2212 2채널, 28비트, 커패시턴스-디지털 컨버터 FDC2212-Q1 2채널, 28비트, 차량용 커패시턴스-디지털 컨버터 FDC2214 4채널, 28비트, 커패시턴스-디지털 컨버터 FDC2214-Q1 4채널, 28비트, 오토모티브 커패시턴스-디지털 컨버터
하드웨어 개발
평가 보드
FDC1004EVM FDC1004EVM - 4채널 커패시턴스-디지털 컨버터 평가 모듈 FDC1004QEVM 오토모티브 4채널 커패시턴스-디지털 컨버터 평가 모듈 FDC2114EVM 2개의 커패시티브 센서 평가 모듈이 포함된 FDC2114 FDC2214EVM 2개의 커패시티브 센서 평가 모듈이 포함된 FDC2214 HDC1010EVM HDC1010 저전력 습도 및 온도 센서 평가 모듈 HDC1080EVM HDC1080 저전력 습도 및 온도 센서 평가 모듈 HDC2010EVM HDC2010 저전력 습도 및 온도 센서 평가 모듈 HDC2080EVM HDC2080 저전력 습도 및 온도 센서 평가 모듈 LDC1000EVM LDC1000EVM - 샘플 PCB 코일을 사용한 인덕턴스-디지털 컨버터 평가 모듈 LDC1312EVM LDC1312 샘플 PCB 코일을 사용한 인덕턴스-디지털 컨버터 평가 모듈 LDC1314EVM LDC1314 샘플 PCB 코일을 사용한 인덕턴스-디지털 컨버터 평가 모듈 LDC1612EVM LDC1612 샘플 PCB 코일을 사용한 인덕턴스-디지털 컨버터 평가 모듈 LDC1614EVM LDC1614 샘플 PCB 코일을 사용한 인덕턴스-디지털 컨버터 평가 모듈 LDC2114EVM LDC2114 1.8V 4채널 인덕티브 터치 평가 모듈
IDE, 구성, 컴파일러 또는 디버거

ASC-STUDIO-HDC2010 ASC studio for configuring all aspects of the HDC2010 humidity sensor

SysConfig can be used to help simplify configuration challenges and accelerate software development with the HDC2010.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
습도 센서
HDC2010 2% RH 초소형 저전력 디지털 상대 습도 센서
플러그 인

SIMPLELINK-SDK-SENSOR-ACTUATOR-PLUGIN Sensor and Actuator Plug-in for SimpleLink™ MCU SDKs

The Sensor and Actuator Plugin for SimpleLink™ MCU SDKs provides support for a variety of related components including optical and temperature and humidity sensors, allowing customers to easily add new features to their SimpleLink MCU-based design. API user guides are provided for each (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
디지털 온도 센서
TMP116 0.2C 디지털 온도 센서, 64비트 비휘발성 메모리
초음파 센서 AFE
PGA460 초음파 신호 프로세서 및 변환기 드라이버
Wi-Fi 제품
CC3220MODA 안테나가 포함된 SimpleLink™ 32비트 Arm Cortex-M4 Wi-Fi CERTIFIED™ 무선 모듈 CC3220R 6 TLS/SSL 및 256KB RAM을 갖춘 SimpleLink™ 32비트 Arm Cortex-M4 Wi-Fi® 무선 MCU CC3220S 보안 부팅, 256KB RAM을 갖춘 SimpleLink™ 32비트 Arm Cortex-M4 Wi-Fi® 무선 MCU CC3220SF 1MB 플래시와 256KB RAM을 갖춘 SimpleLink™ 32비트 Arm Cortex-M4 Wi-Fi® 무선 MCU
선형 홀 효과 센서
DRV5055 아날로그 출력을 지원하는 비율 측정 단극 선형 홀 효과 센서
습도 센서
HDC2010 2% RH 초소형 저전력 디지털 상대 습도 센서 HDC2080 2% RH 초저전력 디지털 상대 습도 센서, 인터럽트/DRDY
정밀 ADC
ADS7142-Q1 프로그래머블 임계값 및 호스트 웨이크업을 지원하는 오토모티브 2채널 12비트 140kSPS I2C 호환 ADC
저전력 2.4GHz 제품
CC2640R2F SimpleLink™ 32비트 Arm® Cortex®-M3 Bluetooth® 5.1 저에너지 무선 MCU(128KB 플래시)
주변광 센서
OPT3001 인체의 눈에 정확하게 반응하는 디지털 주변광 센서(ALS)
하드웨어 개발
평가 보드
BOOSTXL-ADS7142-Q1 ADS7142-Q1 2채널 12비트 140kSPS I2C 호환 ADC BoosterPack™ 플러그인 모듈 BOOSTXL-BASSENSORS 건물 자동화 센서 BoosterPack 모듈 BOOSTXL-PGA460 PGA460-Q1 변환기가 탑재된 초음파 센서 신호 조절기 평가 모듈 LAUNCHXL-CC1310 CC1310 LaunchPad™ development kit for sub-1-GHz SimpleLink™ wireless MCU LAUNCHXL-CC2640R2 CC2640R2 LaunchPad™ development kit for SimpleLink™ Bluetooth® Low Energy wireless MCU LAUNCHXL-CC26X2R1 다중 표준 SimpleLink™ 무선 MCU용 CC26x2R LaunchPad™ 개발 키트
개발 키트
BOOSTXL-ULN2003 ULN2003 alc CSD17571Q2 NexFET™를 지원하는 듀얼 스테퍼 모터 드라이버 부스터팩 CC3220S-LAUNCHXL CC3220S LaunchPad™ development kit for Wi-Fi® SimpleLink™ wireless MCU CC3220SF-LAUNCHXL CC3220SF LaunchPad™ development kit for Wi-Fi® SimpleLink™ wireless MCU LAUNCHXL-CC1352R1 CC1352R LaunchPad™ development kit for SimpleLink™ multi-band wireless MCU MSP-EXP432E401Y MSP432E401Y LaunchPad™ development kit for Ethernet SimpleLink™ MCU
다운로드 옵션
시뮬레이션 모델

HDC2010 IBIS Model

SNAM205.ZIP (79 KB) - IBIS Model
레퍼런스 디자인

TIDA-010941 — 주변광 제거를 지원하는 연기 감지를 위한 스마트 아날로그 센서 인터페이스 레퍼런스 설계

이 레퍼런스 설계는 UL217 9차 버전 감도 및 화재 발생 테스트를 통과하는 낮은 BOM 비용의 연기 감지기 설계를 제공합니다. 변조 기반 광전 아키텍처를 사용하는 이 레퍼런스 설계는 챔버형 또는 챔버 없는 연기 감지에서 애플리케이션의 주변 광에 대한 높은 제거를 달성할 수 있습니다. 또한 이 설계는 신호 체인에 대한 높은 신호 대 잡음 비율을 가지고 있어 연기 감지기 애플리케이션에서 오경보를 줄이는 강력한 알고리즘을 구현하고 공기 품질 감지 애플리케이션의 미립자 감지를 가능하게 합니다. 이 설계는 MSPM0L1306 (...)
Design guide: PDF
레퍼런스 디자인

TIDA-01625 — 저전력 습도 및 온도 디지털 측정기 레퍼런스 설계

The HDC2010 is an integrated humidity and temperature sensor reference design that provides high accuracy measurements with very low power consumption, in an ultra-compact WLCSP (Wafer Level Chip Scale Package). The HDC2010METER is an HDC2010 demonstration board which provides a convenient digital (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01477 — Sub-1GHz 및 센서-클라우드 네트워크를 지원하는 습도 및 온도 센서 노드 레퍼런스 설계

This reference design demonstrates how to create an industrial sensor-to-cloud end node capable of connecting to an IoT network gateway and a cloud data provider. This sensor node reference design uses Texas Instruments' nano-power system timer for power gating, low Iq boost converter, (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01518 — Sub-1GHz와 및 10년의 코인 셀 배터리 수명을 지원하는 저전력 홍수/고정 감지기 레퍼런스 디자인

This reference design uses Texas Instruments low-power consumption digital dual temperature and humidity sensors and the SimpleLink™ ultra-low power Sub-1 GHz wireless microcontroller (MCU) platform to demonstrate a flood and freeze detector with extremely long battery life and no wiring (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YPA) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상