제품 상세 정보

Local sensor accuracy (max) 0.13 Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 2 Supply voltage (max) (V) 5.5 Supply current (max) (µA) 12 Interface type Analog output Sensor gain (mV/°C) -5.19 Rating Catalog
Local sensor accuracy (max) 0.13 Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 2 Supply voltage (max) (V) 5.5 Supply current (max) (µA) 12 Interface type Analog output Sensor gain (mV/°C) -5.19 Rating Catalog
DSBGA (YFQ) 4 1 mm² 1 x 1
  • Accuracy:
    • ±0.05°C (typ) or ±0.13°C (max) from 20°C to 42°C
    • ±0.2°C (max) from -20°C to 90°C
    • ±0.23°C (max) from 90°C to 110°C
    • ±0.36°C (max) from -55°C to 150°C
  • Wide Temperature Range: −55°C to 150°C
  • Matching of Two Adjacent LMT70A on Tape and Reel: 0.1°C (max) at 30°C
  • Very Linear Analog Temperature Sensor with Output Enable Pin
  • NTC Output Slope: -5.19 mV/°C
  • Output On/Off Switch with RDS on < 80 Ω
  • Wide Power Supply Range: 2.0 V to 5.5 V
  • Low Power Supply Current: 9.2 µA (typ)12 µA (max)
  • Ultra Small 0.88 mm by 0.88 mm 4-bump WLCSP (DSBGA) Package

All trademarks are the property of their respective owners.

  • Accuracy:
    • ±0.05°C (typ) or ±0.13°C (max) from 20°C to 42°C
    • ±0.2°C (max) from -20°C to 90°C
    • ±0.23°C (max) from 90°C to 110°C
    • ±0.36°C (max) from -55°C to 150°C
  • Wide Temperature Range: −55°C to 150°C
  • Matching of Two Adjacent LMT70A on Tape and Reel: 0.1°C (max) at 30°C
  • Very Linear Analog Temperature Sensor with Output Enable Pin
  • NTC Output Slope: -5.19 mV/°C
  • Output On/Off Switch with RDS on < 80 Ω
  • Wide Power Supply Range: 2.0 V to 5.5 V
  • Low Power Supply Current: 9.2 µA (typ)12 µA (max)
  • Ultra Small 0.88 mm by 0.88 mm 4-bump WLCSP (DSBGA) Package

All trademarks are the property of their respective owners.

The LMT70 is an ultra-small, high-precision, low-power CMOS analog temperature sensor with an output enable pin. Applications for the LMT70 include virtually any type of temperature sensing where cost-effective, high precision and low-power are required, such as Internet of Things (IoT) sensor nodes, medical thermometers, high-precision instrumentation and battery powered devices. The LMT70 is also a great replacement for RTD and precision NTC/PTC thermistors.

Its output enable pin allows multiple LMT70s to share one ADC channel, thus simplifying ADC calibration and reducing the overall system cost for precision temperature sensing. The LMT70 also has a linear and low impedance output allowing seamless interface to an off-the-shelf MCU/ADC. Dissipating less than 36µW, the LMT70 has ultra-low self-heating supporting its high-precision over a wide temperature range.

The LMT70A provides unparalleled temperature matching performance of 0.1°C (max) for two adjacent LMT70A's picked from the same tape and reel. Therefore, the LMT70A is an ideal solution for energy metering applications requiring heat transfer calculations.

The LMT70 is an ultra-small, high-precision, low-power CMOS analog temperature sensor with an output enable pin. Applications for the LMT70 include virtually any type of temperature sensing where cost-effective, high precision and low-power are required, such as Internet of Things (IoT) sensor nodes, medical thermometers, high-precision instrumentation and battery powered devices. The LMT70 is also a great replacement for RTD and precision NTC/PTC thermistors.

Its output enable pin allows multiple LMT70s to share one ADC channel, thus simplifying ADC calibration and reducing the overall system cost for precision temperature sensing. The LMT70 also has a linear and low impedance output allowing seamless interface to an off-the-shelf MCU/ADC. Dissipating less than 36µW, the LMT70 has ultra-low self-heating supporting its high-precision over a wide temperature range.

The LMT70A provides unparalleled temperature matching performance of 0.1°C (max) for two adjacent LMT70A's picked from the same tape and reel. Therefore, the LMT70A is an ideal solution for energy metering applications requiring heat transfer calculations.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
LM94023 활성 다중 게인, 클래스 AB 아날로그 출력 및 WCSP를 지원하는 ±1.5°C 온도 센서 Similar sensor gain (-5.5 mV/°C) in similar package. Lower accuracy (±1.5°C) for cost-optimized designs
LMT70 활성 0.1C 아날로그 온도 센서, -5.19mV/C, 고정밀 정합 쌍, 출력 활성화 핀 Exact equivalent without device-to-device matching
비교 대상 장치와 유사한 기능
TMP117 활성 0.1°C 디지털 온도 센서, 48비트 EEPROM, PT100/PT1000 RTD 교체 Digital output (I2C) temperature sesor with 0.1°C accuracy
TMP119 활성 향상된 변형 허용 오차를 갖춘 WCSP 패키지의 ±0.08°C 정확도 디지털 온도 센서 Digital output (I2C) temperature sesor with 0.08°C accuracy

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet LMT70, LMT70A ±0.05°C Precision Analog Temperature Sensor, RTD and Precision NTC Thermistor IC datasheet (Rev. A) PDF | HTML 2015/05/11
Application note SC Temp Sensors Challenge Precision RTDs and Thermistors in Build Automation (Rev. A) 2019/05/08

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMT70EVM — LMT70 평가 모듈 정밀 아날로그 출력 온도 센서, 출력 활성화 가능

The LMT70EVM allows users to evaluate the performance of the LMT70 temperature sensor. The EVM comes in a USB stick form factor package with an onboard MSP430F5528 microcontroller that interfaces with both the USB port and the LMT70 device. The EVM also comes with perforated slots that the user can (...)

사용 설명서: PDF
지원 소프트웨어

SNIC010 LMT70EVM Installer v1.4.0.0

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
아날로그 온도 센서
LMT70 0.1C 아날로그 온도 센서, -5.19mV/C, 고정밀 정합 쌍, 출력 활성화 핀 LMT70A ±0.1°C 정합 정확도 정밀 아날로그 온도 센서
하드웨어 개발
평가 보드
LMT70EVM LMT70 평가 모듈 정밀 아날로그 출력 온도 센서, 출력 활성화 가능
레퍼런스 디자인

TIDA-00838 — 868MHz에서 wM-Bus를 지원하는 열 비용 분배기 레퍼런스 디자인

TIDA-00838 레퍼런스 디자인은 "2개 센서 측정 방법"을 사용하여 EN834 표준에 따라 열 비용 분배기 시스템을 구현합니다. 이 솔루션은 +20~+85°C 범위에서 0.5°C 이상의 정확도를 달성합니다. 아날로그 온도 센서 2개를 짝을 이루어 제조 중에 보정할 필요가 없고 OEM 시스템 비용을 낮출 수 있습니다. 무선 MCU는 868MHz에서 S-, T- 및 C-모드(계량기 장치)에 대한 wM-Bus 지원을 제공하고 2개의 온도 센서를 제어합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00646 — 열 비용 분배기를 위한 매칭된 정밀 온도 센서 레퍼런스 설계

TIDA-00646 레퍼런스 디자인은 열 비용 계산기 및 기타 사물 인터넷(IoT) 애플리케이션에서 요구하는 정밀 온도 센서 기술을 보여줍니다. 열비용 분배기는 룸과 히터 본체 사이의 온도차를 사용하여 여러 사용자에게 중앙 난방 시스템의 총 비용의 일부를 할당합니다. TIDA-00646은 +20~+85°C 범위에서 0.5도 이상의 정확도를 달성합니다. 설계에 사용되는 LMT70A CMOS 센서는 제조 중에 보정이 필요하지 않으므로 OEM 시스템 비용을 절감할 수 있습니다. 이 설계는 "2-센서 측정 방법"을 사용하여 EN834 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01212 — 단일 양방향 적외선 LED 통신 포트 레퍼런스 디자인

TIDA-01212 레퍼런스 디자인은 9600bps에서 양방향 IrDA PHY 링크를 모든 스마트 계량 또는 하위 계량 장치에 추가할 수 있는 초저전력이지만 간단하고 저렴한 솔루션을 제공합니다. 센서 컨트롤러 엔진 내부의 최적화된 소프트웨어로 제어되는 단일 IR LED, 저항 및 내부 1.27V 레퍼런스를 사용하면 IrDA PHY @9600bps용 트랜스미터와 리시버가 모두 구현됩니다. 이 설계 접근 방식은 TI CC13xx 및 CC26xx  SimpleLink™ 무선 MCU와 함께 사용하면 기존 광학 IrDA PHY 모듈을 두 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00848 — 시스템 유연성 개선을 위해 GPIO 핀을 사용한 세그먼트 LCD 제어용 레퍼런스 디자인

TIDA-00848 레퍼런스 디자인은 7-세그먼트 LCD 작동이 필요하지만 LCD 디스플레이가 항상 켜져 있을 필요는 없는 스마트 그리드 또는 IoT 애플리케이션에 LCD 기능을 추가할 수 있는 혁신적인 솔루션을 제공합니다. CC1310 SimpleLinkTM 무선 MCU에서 몇 개의 저항과 최적화된 GPIO 제어 소프트웨어를 사용하면 7세그먼트 LCD 지원이 구현됩니다. 이 설계 접근 방식은 온칩 LCD 컨트롤러 모듈 없이 모든 TI 마이크로컨트롤러와 함께 사용할 수 있습니다.
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFQ) 4 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상