제품 상세 정보

Local sensor accuracy (max) 0.08 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, EEPROM, NIST traceable, One-shot conversion Supply current (max) (µA) 5 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 4 Rating Catalog
Local sensor accuracy (max) 0.08 Type Local Operating temperature range (°C) -55 to 150 Supply voltage (min) (V) 1.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, EEPROM, NIST traceable, One-shot conversion Supply current (max) (µA) 5 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 4 Rating Catalog
DSBGA (YBG) 6 1.4136 mm² 0.95 x 1.488
  • TMP119 high-accuracy temperature sensor
    • ±0.03°C (typical) from 0°C to 45°C
    • ±0.08°C (maximum) from 0°C to 45°C
    • ±0.09°C (maximum) from –25°C to 85°C
    • ±0.12°C (maximum) from –40°C to 85°C
    • ±0.15°C (maximum) from –55°C to 125°C
    • ±0.2°C (maximum) from –55°C to 150°C
  • Operating temperature range: –55°C to 150°C
  • Low power consumption:
    • 3.5µA, 1Hz conversion cycle
    • 150nA shutdown current
  • Supply range:
    • 1.7V to 5.5V from –55°C to 70°C
    • 1.8V to 5.5V from –55°C to 150°C
  • 16-bit resolution: 0.0078°C (1 LSB)
  • Programmable temperature alert limits
  • Selectable averaging
  • Strain Tolerance
  • Digital offset for system correction
  • General-purpose EEPROM: 48 bits
  • NIST traceability
  • SMBus™, I2C interface compatibility
  • Medical grade: helps meet ASTM E1112 and ISO 80601-2-56
  • RTDs replacement: PT100, PT500, PT1000
  • TMP119 high-accuracy temperature sensor
    • ±0.03°C (typical) from 0°C to 45°C
    • ±0.08°C (maximum) from 0°C to 45°C
    • ±0.09°C (maximum) from –25°C to 85°C
    • ±0.12°C (maximum) from –40°C to 85°C
    • ±0.15°C (maximum) from –55°C to 125°C
    • ±0.2°C (maximum) from –55°C to 150°C
  • Operating temperature range: –55°C to 150°C
  • Low power consumption:
    • 3.5µA, 1Hz conversion cycle
    • 150nA shutdown current
  • Supply range:
    • 1.7V to 5.5V from –55°C to 70°C
    • 1.8V to 5.5V from –55°C to 150°C
  • 16-bit resolution: 0.0078°C (1 LSB)
  • Programmable temperature alert limits
  • Selectable averaging
  • Strain Tolerance
  • Digital offset for system correction
  • General-purpose EEPROM: 48 bits
  • NIST traceability
  • SMBus™, I2C interface compatibility
  • Medical grade: helps meet ASTM E1112 and ISO 80601-2-56
  • RTDs replacement: PT100, PT500, PT1000

The TMP119 is a high-precision digital temperature sensor. The device is designed to help meet ASTM E1112 and ISO 80601 accuracy requirements for electronic patient thermometers. The TMP119 provides a 16-bit temperature result with a resolution of 0.0078°C and an accuracy of up to ±0.08°C across the temperature range of 0°C to 45°C with no calibration. The TMP119 has an interface that is I2C- and SMBus™-compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use. The TMP119 operates from 1.7V to 5.5V and typically consumes 3.5µA for a 1Hz conversion cycle.

For non-medical applications, the TMP119 can serve as a single chip digital alternative to a Platinum RTD. The TMP119 has an accuracy comparable to a Class AA RTD, while only using a fraction of the power of the power typically needed for a PT100 RTD. The TMP119 simplifies the design effort by removing many of the complexities of RTDs such as precision references, matched traces, complicated algorithms, and calibration. The device is designed to be strain tolerant, allowing robustness over typical strains often seen in PCB manufacturing, including device soldering, molding, underfill, and board flexing.

The TMP119 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.

The TMP119 is a high-precision digital temperature sensor. The device is designed to help meet ASTM E1112 and ISO 80601 accuracy requirements for electronic patient thermometers. The TMP119 provides a 16-bit temperature result with a resolution of 0.0078°C and an accuracy of up to ±0.08°C across the temperature range of 0°C to 45°C with no calibration. The TMP119 has an interface that is I2C- and SMBus™-compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use. The TMP119 operates from 1.7V to 5.5V and typically consumes 3.5µA for a 1Hz conversion cycle.

For non-medical applications, the TMP119 can serve as a single chip digital alternative to a Platinum RTD. The TMP119 has an accuracy comparable to a Class AA RTD, while only using a fraction of the power of the power typically needed for a PT100 RTD. The TMP119 simplifies the design effort by removing many of the complexities of RTDs such as precision references, matched traces, complicated algorithms, and calibration. The device is designed to be strain tolerant, allowing robustness over typical strains often seen in PCB manufacturing, including device soldering, molding, underfill, and board flexing.

The TMP119 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TMP117 활성 0.1°C 디지털 온도 센서, 48비트 EEPROM, PT100/PT1000 RTD 교체 Lower accuracy options (0.1°C or 0.2°C) pin-to-pin equivalents for cost-optimized designs
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
신규 TMP118 활성 ±0.1°C 정확도, 초음파(336μm²) 얇은( 240μm) I²C 디지털 온도 센서 Smaller (336 μm²) and thinner (240 μm), with slightly lower accuracy (±0.1°C)

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기
유형 직함 날짜
* Data sheet TMP119 Ultra-High Accuracy, Low-Power, Digital Temperature Sensor With SMBus™- and I2 C-Compatible Interface datasheet PDF | HTML 2024/01/30
Application note Analyzing PCB Thermal Resistance in High-Accuracy Temperature Sensors (Rev. A) PDF | HTML 2024/10/15
Certificate TMP119EVM EU Declaration of Conformity (DoC) 2023/09/26

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TMP119EVM — TMP119 온도 센서 평가 모듈

TMP119EVM은 TMP119 장치를 평가하고 비트 단위 레지스터 레벨까지 장치에 익숙해지기 위한 빠른 설정을 제공하도록 설계되었습니다. EVM은 TMP119 디지털 온도 센서의 성능을 평가할 수 있습니다. TMP119EVM은 탈착식 분리 가능한 TMP119 센서 보드 부분이 있어 측정 위치에 유연한 측정 기능이 있습니다.

사용 설명서: PDF | HTML
평가 모듈(EVM)용 GUI

TMP119EVM-GUI TMP119EVM GUI for evaluation of the TMP119 temperature sensor

This GUI allows users to evaluate the performance of the TMP119 high-accuracy local digital temperature sensor
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
디지털 온도 센서
TMP119 향상된 변형 허용 오차를 갖춘 WCSP 패키지의 ±0.08°C 정확도 디지털 온도 센서
레퍼런스 디자인

TIDA-010280 — 호흡, 속도 및 온도를 지원하는 소형, 무선, 6-리드 ECG 홀터 모니터 레퍼런스 설계

웨어러블 바이오센싱 홀스터 모니터 레퍼런스 설계는 심전도(ECG), 심박수, 호흡, 페이스 펄스, 온도 및 동작과 같은 생명 징후를 지속적으로 모니터링하는 TI의 최신 제품을 위한 평가 플랫폼을 제공합니다. 이 설계는 최대 6리드(4개 채널)의 저전력, 고해상도, 고집적 ECG 신호 수집에 AFE159RP4를 활용하고 체온 모니터링에 TMP119를 사용합니다. 측정된 데이터는 CC2674R10(Bluetooth® 저에너지 5.3 지원)을 통해 스마트폰이나 의료 모니터링 시스템과 같은 원격 터미널로 전송되어 실시간 디스플레이를 (...)
Design guide: PDF
레퍼런스 디자인

TIDA-010288 — 실시간 부정맥 분류를 위한 Edge-AI 지원 무선 ECG 홀터 모니터 레퍼런스 디자인

첨단 AI(인공 지능) 탑재 웨어러블 바이오센싱 홀터 레퍼런스 디자인은 심전도(ECG), 심박수, 호흡, 페이스 펄스, 체온, 움직임 등의 생체 신호를 지속적으로 모니터링하는 TI의 최신 제품에 대한 평가 플랫폼을 제공합니다. 이 디자인은 최대 6리드(4개 채널)의 저전력, 고해상도, 고집적 ECG 신호 수집에 AFE159RP4를 사용하고 체온 모니터링에 TMP119를 사용합니다. 하드웨어 가속을 지원하는 MSPM0 MCU에서 측정된 데이터를 처리하여 실시간으로 부정맥을 분류하면 CC2340R5(Bluetooth ® (...)
Design guide: PDF
레퍼런스 디자인

TIDA-01624 — Bluetooth® 지원 고정밀 피부 온도 측정 플렉스 PCB 패치 레퍼런스 설계

이 레퍼런스 설계는 CC2340R5 무선 MCU를 사용한 TMP119 고정밀 디지털 온도 센서를 사용하여 피부 온도 감지를 보여줍니다. 이 설계는 의료용 및 웨어러블 애플리케이션의 피부 온도 측정을 위한 평가 소프트웨어 및 스마트 장치 애플리케이션과 함께 설계 가이드를 제공합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010270 — Bluetooth® 저에너지를 사용한 지속적인 생명 징후 모니터링을 위한 바이오센싱 패치 레퍼런스 설계

바이오센싱 패치 레퍼런스 설계는 심전도(ECG), 심박수, 호흡, 페이스 펄스, 온도 및 동작과 같은 생명 징후를 지속적으로 모니터링하기 위한 최신 제품을 평가할 수 있는 플랫폼을 제공합니다. 이 설계는 정확한 단일 리드 ECG 신호 수집에 AFE4960을, 및 체온 모니터링에 TMP119를 사용합니다. 측정된 데이터는 CC2674R10에서 스마트폰 및 의료 모니터링 시스템과 같은 원격 터미널로 전송되어 실시간 디스플레이를 지원합니다. 온보드 LED(발광 다이오드)는 리드 오프, 저전력 및 Bluetooth® LE(저전력) 연결과 (...)
Design guide: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YBG) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상