首頁 電源管理 AC/DC 和 DC/DC 轉換器 (整合式 FET)
首頁
電源管理
AC/DC 和 DC/DC 轉換器 (整合式 FET)
最新

LM706A0-Q1

現行

車用、高密度、4.5V 至 65V 輸入、10A 低 EMI 同步 DC/DC 降壓轉換器

立即訂購
產品規格表

LM706A0-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 10 Vin (min) (V) 4.5 Vin (max) (V) 65 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Stackable, Thermal shutdown, UVLO adjustable EMI features Spread Spectrum Control mode Current Vout (min) (V) 0.8 Vout (max) (V) 36 Iq (typ) (µA) 6.5 Duty cycle (max) (%) 99
Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 10 Vin (min) (V) 4.5 Vin (max) (V) 65 Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable switching frequency, Auto Mode, Automotive load dump, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Over Current Protection, Power good, Soft Start Fixed, Stackable, Thermal shutdown, UVLO adjustable EMI features Spread Spectrum Control mode Current Vout (min) (V) 0.8 Vout (max) (V) 36 Iq (typ) (µA) 6.5 Duty cycle (max) (%) 99
VQFN (RRX) 29 36 mm² 6 x 6
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Functional Safety-Capable
  • Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
    • Wide input voltage range: 4.5V to 65V
    • Shutdown mode current: 2.3µA
    • No-load IQ regulating 24V to 5V: 10.4µA
    • 1% accurate, fixed 3.3V, 5V, 12V, or adjustable outputs from 0.8V to 36V
    • Dual-phase operation enabling output currents up to 16A
  • Designed for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
    • Switching frequency: 200kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • Enable, power good, and thermal shutdown
    • Internal or external loop compensation
  • 6mm × 6mm thermally optimized, RoHS compliant, QFN-29 package with Pb-free plating
  • Create a custom design using the LM706A0-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
  • Functional Safety-Capable
  • Synchronous DC/DC converter with a versatile buck controller and robust power MOSFETs
    • Wide input voltage range: 4.5V to 65V
    • Shutdown mode current: 2.3µA
    • No-load IQ regulating 24V to 5V: 10.4µA
    • 1% accurate, fixed 3.3V, 5V, 12V, or adjustable outputs from 0.8V to 36V
    • Dual-phase operation enabling output currents up to 16A
  • Designed for low EMI requirements
    • Facilitates CISPR 25 Class 5 compliance
    • Pin-selectable ±8% dual-random spread spectrum reduces peak emissions
    • Switching frequency: 200kHz to 2.2MHz
    • Pin-configurable AUTO or FPWM operation
  • Inherent protection features for robust design
    • Internal hiccup-mode overcurrent protection
    • Enable, power good, and thermal shutdown
    • Internal or external loop compensation
  • 6mm × 6mm thermally optimized, RoHS compliant, QFN-29 package with Pb-free plating
  • Create a custom design using the LM706A0-Q1 with the WEBENCH Power Designer

The LM706A0-Q1 is a low-IQ, wide-VIN synchronous buck converter designed for an input voltage range of 4.5V to 65V and delivering up to 10A of output current at fixed output voltages of 3.3V, 5V, 12V, or an adjustable output.

The LM706A0-Q1 uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM706A0-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 20A of output current.

The LM706A0-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines low-frequency triangular and high-frequency cycle-by-cycle random modulations for improved EMI performance across a wide range of frequency bands.

Additional features of the LM706A0-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.8ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM706A0-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).

The LM706A0-Q1 is a low-IQ, wide-VIN synchronous buck converter designed for an input voltage range of 4.5V to 65V and delivering up to 10A of output current at fixed output voltages of 3.3V, 5V, 12V, or an adjustable output.

The LM706A0-Q1 uses a peak current-mode control architecture for easy loop compensation, fast transient response, and excellent load and line regulation. A pair of LM706A0-Q1 converters can be set up in an interleaved mode (paralleled outputs) with accurate current sharing for applications requiring up to 20A of output current.

The LM706A0-Q1 features a unique Dual Random Spread Spectrum (DRSS) function that combines low-frequency triangular and high-frequency cycle-by-cycle random modulations for improved EMI performance across a wide range of frequency bands.

Additional features of the LM706A0-Q1 include user-selectable diode emulation for lower current consumption at light-load conditions, open-drain Power-Good flag for fault reporting and output monitoring, precision enable input, monotonic start-up into prebiased load, integrated VCC bias supply regulator, internal 2.8ms soft-start time, and thermal shutdown protection with automatic recovery.

The LM706A0-Q1 converter comes in a 6mm × 6mm thermally-optimized, 29-pin QFN package. The three die-attach pads (VIN, SW, and PGND) improve thermal performance and board level reliability (BLR).
filter 尋找其它 AC/DC 和 DC/DC 轉換器 (整合式 FET)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 14
類型 標題 日期
* Data sheet LM706A0-Q1 65V, 10A, Automotive, High-Efficiency Buck Converter Designed for High Power Density datasheet PDF | HTML 2024年 9月 18日
Application note Controller to Converter – Design Considerations for 24V and 48V Systems PDF | HTML 2024年 10月 2日
Functional safety information LM706A0-Q1 Functional Safety FIT Rate, FMD, and Pin FMA PDF | HTML 2024年 9月 19日
EVM User's guide LM706A0-Q1 Buck Converter Evaluation Module PDF | HTML 2024年 9月 16日
Certificate LM706A0QEVM EU Declaration of Conformity (DoC) 2024年 7月 30日
Application note Reducing Conducted EMI in a Buck Converter for 48 V Automotive Applications PDF | HTML 2023年 12月 13日
E-book An Engineer’s Guide to Low EMI in DC/DC Regulators 2021年 4月 21日
Technical article Using DC/DCs buck converters to power modern safety features in commercial vehicle PDF | HTML 2020年 7月 27日
Technical article How to meet European Commission ADAS requirements with TI DC/DC converters PDF | HTML 2019年 5月 9日
Technical article Top three qualities to consider when designing a video doorbell power supply PDF | HTML 2018年 9月 25日
Application brief Improving RF Power Amplifier Efficiency in 5G Radio Systems 2018年 9月 5日
White paper An overview of radiated EMI specifications for power supplies 2018年 6月 5日
Technical article Effects of IC package on EMI performance PDF | HTML 2018年 5月 22日
White paper An overview of conducted EMI specifications for power supplies 2018年 2月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM706A0QEVM — LM706A0-Q1 評估模組

LM706A0-Q1 高密度評估模組 (EVM) 設計為使用從 8V 至 65V 的穩壓或非穩壓高電壓輸入軌，可在最高 10A 的負載電流下產生嚴格穩壓的 3.3V 輸出電壓。這款 VIN 範圍廣泛的 DC/DC 解決方案提供超大額定電壓與運作裕度，可承受供應軌電壓暫態。自由運轉切換頻率為 400kHz，並且能與頻率較高或較低的外部時脈訊號同步。為這款 EVM 選擇的動力系統被動元件符合汽車 AEC-Q200 標準，且可從多個元件廠商購買。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

LM70880-Q1 PSpice Transient model (Rev. A)

SNVMCD7A.ZIP (3292 KB) - PSpice Model
下載
計算工具

LM70XX0-CALC — LM70XX0 quickstart design tool calculator

Quickstart calculator for LM70XX0
支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 轉換器 (整合式 FET)
LM704A0-Q1 — 車用、高密度、4.5V 至 45V 輸入、10A 低 EMI 同步 DC/DC 降壓轉換器 LM70660 — 高密度、4.5V 至 65V 輸入、6A 低 EMI 同步 DC/DC 降壓轉換器 LM706A0 — 高密度、4.5V 至 65V 輸入、10A 低 EMI 同步 DC/DC 降壓轉換器 LM706A0-Q1 — 車用、高密度、4.5V 至 65V 輸入、10A 低 EMI 同步 DC/DC 降壓轉換器 LM70840 — 高密度、4.5V 至 80V 輸入、4A 低 EMI 同步 DC/DC 降壓轉換器 LM70840-Q1 — 車用、高密度、4.5V 至 80V 輸入、4A 低 EMI 同步 DC/DC 降壓轉換器 LM70860 — 高密度、4.5V 至 80V 輸入、6A 低 EMI 同步 DC/DC 降壓轉換器 LM70860-Q1 — 車用、高密度、4.5V 至 80V 輸入、6A 低 EMI 同步 DC/DC 降壓轉換器 LM70880 — 高密度、4.5V 至 80V 輸入、8A 低 EMI 同步 DC/DC 降壓轉換器 LM70880-Q1 — 車用、高密度、4.5-V 至 80-V 輸入、8-A 低 EMI 同步 DC/DC 降壓轉換器
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RRX) 29 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片