TIOL112
- 7-V to 36-V supply voltage
- PNP, NPN or IO-Link configurable output
- IEC 61131-9 COM1, COM2 and COM3 Data Rate Support
- Functional safety-capable
- Pin-compatible with TIOL111(x) with improved performance
- Low residual Voltage of 0.5 V (typical) at 200 mA
- Active driver current limiting capability
- Improved thermal performance of the package
- Slower driver slew rates to reduce overshoots: maximum of 750 ns
-
Integrated protection features for robust systems
- Configurable driver overcurrent limit: 50 mA to 350 mA
- Active reverse polarity protection of up to 65 V on L+, CQ and L-
- Fault indicator for overcurrent, overtemperature and UVLO faults
- Safe and fast demagnetization of inductive loads
- Extended ambient temperature operation: –40°C to 125°C
- Integrated EMC protection on L+ and CQ
- ±8 kV IEC 61000-4-2 ESD contact discharge
- ±4 kV IEC 61000-4-4 electrical fast transient
- ±1.2 kV/500 Ω IEC 61000-4-5 surge
- Large capacitive load driving capability
- < 2-µA CQ leakage current
- < 1.5-mA quiescent supply current
- Integrated LDO options for up to 20 mA current
- TIOL1123: 3.3-V LDO
- TIOL1125: 5-V LDO
-
TIOL1123L (YAH): Selectable 3.3-V/5-V Output
- Remote wake-up indication and wake-up generation
- Small space-saving package options
- 3 mm x 3 mm 10-pin VSON package: pin-compatible with TIOL111
- 2.45 mm x 1.7 mm DSBGA package
The TIOL112(x) family of transceivers implements the IO-Link interface for industrial bidirectional, point-to-point communication. When the device is connected to an IO-Link master through a three-wire interface, the master initiates communication and exchange data with the remote node while the TIOL112(x) acts as a complete physical layer for the communication.
These devices are capable of withstanding up to 1.2 kV (500 Ω) of IEC 61000-4-5 surge and feature integrated reverse polarity protection. A simple pin-programmable interface allows easy interfacing with the controller circuits. The output current limit can be configured using an external resistor. TIOL112(x) can be configured to generate wake-up pulse and be used in IO-link master applications. Fault reporting and internal protection functions are provided for undervoltage, overcurrent and overtemperature conditions.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
BOOSTXL-IOLINKM-8 — 八埠 IO-Link 主要裝置 BoosterPack™
此 BoosterPack™ 專為搭配 LP-AM243 TI LaunchPad™ 套件及 Sitara™ AM243x MCU 運作。此設計採用具快速且決定性時脈、獨立週期與位元率配置的八埠 IO-Link 主要裝置。此設計可用於建立遠端 IO 閘道,以連接 OPC UA、Profinet、EtherCAT 或乙太網路 IP。適用 Sitara ™ 處理器基礎訊框處理程式的可編程即時單元 (PRU) 可提供靈活的時脈與同步控制方式。
RIO-DEV-PLATFORM — Remote IO development platform for Arm-based MCUs with industrial Ethernet
The Remote IO Development Platform provides tailored combinations of hardware and software designed to make it quick and easy to establish remote I/O connections for a variety of applications. This platform can be used to build a remote IO gateway to connect to industrial protocols such as (...)
TIOX1X2XEVM — 適用於 IO-Link 的 TIOL112x 和 TIOS102x 評估模組
TIOx1x2xEVM 讓使用者能夠評估 TIOL112x 及 TIOS102x IO-Link 收發器系列的所有功能。EVM 包含 A 級雙通道配置的業界標準 4 針腳 M12 連接器,可實作 TIOL1123 的一個 IO-Link 通訊通道、TIOS1023 的一個數位輸出通道,以及適用於裸線連接和外部負載的螺絲端子塊。低電壓數位輸入和輸出訊號可透過接頭針腳和測試點輕鬆存取,以連接至與許多 TI 微控制器電路板一致的測試設備或微控制器,以快速進行原型設計。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TIDA-010263 — 感測器與致動器的 IO-Link 裝置實作參考設計
TIDA-010234 — 八埠 IO-Link 主要參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
DSBGA (YAH) | 12 | Ultra Librarian |
VSON (DRC) | 10 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。