WEBENCH Is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners
The TPS54231 device is a 2-V, 2-A non-synchronous buck converter that integrates a low RDS(on) high-side MOSFET. To increase efficiency at light loads, a pulse skipping Eco-mode™ feature is automatically activated. Furthermore, the 1-µA shutdown supply current allows the device to be used in battery powered applications. Current mode control with internal slope compensation simplifies the external compensation calculations and reduces component count while allowing the use of ceramic output capacitors. A resistor divider programs the hysteresis of the input undervoltage lockout. An overvoltage transient protection circuit limits voltage overshoots during startup and transient conditions. A cycle-by-cycle current limit scheme, frequency fold back and thermal shutdown protect the device and the load in the event of an overload condition. The TPS54231 device is available in an 8-pin SOIC package that has been internally optimized to improve thermal performance.
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS54231 2-A, 28-V Input, Step-Down DC-DC Converter With Eco-mode™ datasheet (Rev. D) | PDF | HTML | 2014年 10月 24日 |
| User guide | TPS54231 Step-Down Converter Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2021年 10月 26日 | |
| Application note | Low Dropout Operation in a Buck Converter (Rev. A) | 2019年 4月 1日 | ||
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
| Application note | 800VA Pure Sine Wave Inverter's Reference Design (Rev. A) | PDF | HTML | 2017年 8月 1日 | |
| Application note | Using TPS54335A to Create an Inverting Power Supply (Rev. A) | 2017年 7月 19日 | ||
| Application note | Understanding Eco-mode(TM) Operation | 2016年 12月 5日 | ||
| Application note | Create an Inverting Power Supply from a Step-Down Regulator (Rev. B) | 2012年 10月 26日 | ||
| Application note | Designing Type III Compensation for Current Mode Step-Down Converters (Rev. A) | 2010年 9月 15日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
The TPS54231EVM-372 is a fully assembled and tested circuit for evaluating the TPS54231 synchronous step-down SWIFT™ converter. The EVM converts a 7-V to 28-V input voltage to a regulated 3.3-V output voltage that delivers up to 2 A. The switching frequency is internally set at a nominal 570 (...)
The SWIFTINV-CALC Excel sheet is a complementary worksheet to the SLVA317 application note. The worksheet is used to calculate the external components needed to create a negative output voltage from a positive input voltage. The tool features several families of wide input voltage, current-mode (...)
The SWIFTPosNeg-CALC Excel sheet is a complementary worksheet to the SLVA369 application note.
This worksheet is used to calculate the external components needed to create a dual output (i.e. positive and negative) power supply using a step-down switching regulator and catalog off the shelf coupled (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |