TPS6287B10
- Input voltage range: 2.7V to 6V
- Family of pin-to-pin compatible devices: 10A, 15A, 20A, 25A, and 30A
- Three selectable output voltage ranges from 0.4V to 1.675V
- 0.4V to 0.71875V with 1.25mV steps
- 0.4V to 1.0375V with 2.5mV steps
- 0.4V to 1.675V with 5mV steps
- Output voltage accuracy: ±0.8%
- Internal power MOSFETs: 2.6mΩ and 1.5mΩ
- Adjustable soft start
- External compensation
- Selectable start-up output voltage through the VSET1 and VSET2 pins
- 0.4V to 0.775V with 25mV of steps
- 0.8V to 1.55V with 50mV of steps
- Selectable switching frequency of 1.5MHz, 2.25MHz, 2.5MHz, or 3MHz through FSEL pin only for TPS6287BxxJE2 (see Table 4-2)
- Forced PWM or power save mode operation
- Start-up output voltage selection by external resistor or I2C
- I2C-compatible interface with up to 3.4MHz
- Optional stacked operation for increased output current capability
- Differential remote sense
- Thermal pre-warning and thermal shutdown
- Output discharge
- Optional spread spectrum clocking
- Power-good output with window comparator
The TPS6287B10, TPS6287B15, TPS6287B20, TPS6287B25, and TPS6287B30 are a family of pin-to-pin, 10A, 15A, 20A, 25A, and 30A synchronous step-down DC/DC converters with I2C interface and differential remote sense. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 30A output current at high ambient temperature. The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.
The TPS6287Bx family implements an enhanced DCS-control scheme that combines fast transient response with fixed-frequency operation. Devices can operate in power save mode for maximum efficiency, or forced-PWM mode for best transient performance and lowest output voltage ripple.
An optional remote sensing feature maximizes voltage regulation at the point-of-load, and the device achieves ±0.8% DC voltage accuracy for the full output voltage range.
The I2C compatible interface offers several control, monitoring and warning features, such as voltage monitoring and temperature related warnings. The output voltage can be quickly adjusted to adapt the load´s power consumption to the performance needs. The default start-up voltage is resistor selectable through the VSET1 and VSET2 pins.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS6287Bxx 2.7V to 6V Input, 10A, 15A, 20A, 25A, and 30A Fast Transient, Synchronous Step-Down Converter With I2 C Interface datasheet (Rev. C) | PDF | HTML | 2024年 10月 1日 |
Application brief | Increasing Further Data Rates Using High-Current Power Converters in Optical Modules | PDF | HTML | 2024年 9月 26日 | |
Application note | Power Supply Design for AMD Versal™ AI Edge Series | PDF | HTML | 2024年 1月 29日 | |
EVM User's guide | TPS6287B25EVM-024 Buck Converter User's Guide | PDF | HTML | 2023年 12月 12日 | |
Application note | Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) | PDF | HTML | 2023年 11月 29日 | |
Application note | Adjusting the Output Voltage of a Fixed Output Voltage DC-DC Converter | PDF | HTML | 2022年 12月 22日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS62876EVM-199 — TPS62876-Q1 評估模組 75-A 輸出可堆疊降壓式轉換器
TPS62876EVM-199 評估模組 (EVM) 的設計目的旨在幫助使用者輕鬆評估及測試三個 TPS62876-Q1 降壓轉換器的疊堆配置運作及功能性。該模組亦可用於評估 TPS62874-Q1、TPS62875-Q1 和 TPS62877-Q1 裝置。EVM 可將 2.7 V 至 6.0 V 輸入電壓轉換為已調節的 0.75 V 輸出電壓。輸出電流最高可達 75 A。
TPS6287B25EVM-024 — TPS6287B25 評估模組
TPS6287B25 評估模組 (EVM) 是用於評估和測試 TPS6287Bx 降壓轉換器 (包括 TPS6287B10、TPS6287B15、TPS6287B20 和 TPS6287B25) 的運作和功能性的平台。TPS6287B25EVM-024 可將 2.7 V 至 6 V 輸入電壓轉換為已調節的 0.4 V 輸出電壓。輸出電流最高可達 25 A。
此使用指南包含硬體設定說明、印刷電路板 (PCB) 佈局、電路圖和物料清單 (BOM)。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WQFN-FCRLF (RZV) | 24 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點