TPS6521905
- 3 buck converters at up to 2.3 MHz switching frequency.
- 1× VIN: 2.5V – 5.5V; IOUT: 3.5A; VOUT 0.6V – 3.4V
- 2× VIN: 2.5 V – 5.5 V; IOUT: 2A; VOUT 0.6V – 3.4V
- 4 linear regulators:
- 2x VIN: 1.5V – 5.5V; IOUT: 400mA; VOUT: 0.6V – 3.4V (configurable as load switch and bypass-mode, supporting SD-card)
- 2x VIN: 2.2V – 5.5V; IOUT: 300mA; VOUT: 1.2V – 3.3V (configurable as load switch)
- Dynamic voltage scaling on all three buck converters
- Low IQ/PFM, PWM-mode (quasi-fixed frequency)
- Programmable power sequencing and default voltages
- I2C interface, supporting standard, fast-mode and fast-mode+
- Designed to support systems with 14+ rails (2× TPS6521905 devices in multi-PMIC configuration)
- 2 GPOs, 1 GPIO, and 3 multi-function-pins
- EEPROM programmability
The TPS6521905 is a Power Management IC (PMIC) designed to supply a wide range of SoCs in both portable and stationary applications. The device is characterized across an ambient temperature range of -40°C to +105°C, making the PMIC an excellent choice for various industrial applications. The device includes three synchronous stepdown DC-DC converters and four linear regulators.
The DC-DC converters are capable of 1x 3.5A and 2x 2 A. The converters require a small 470nH inductor, 4.7µF input capacitance, and a minimum 10µF output capacitance per rail depending on the switching mode configuration.
Two of the LDOs support output currents of 400mA at an output voltage range of 0.6V to 3.4V. These LDOs support bypass mode, acting as a load-switch, and allow voltage-changes during operation. The other two LDOs support output currents of 300mA at an output voltage range of 1.2V to 3.3V. These LDOs also support load-switch mode.
The I2C-interface, IOs, GPIOs and multi-function-pins (MFP) allow a seamless interface to a wide range of SoCs.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | User Programmable Power Management IC (PMIC) with Three Step-down DC/DC Converters and Four LDOs datasheet (Rev. A) | PDF | HTML | 2024年 6月 5日 |
Application note | Powering Xilinx Zynq UltraScale+ MPSoCs With the TPS65219 PMIC | PDF | HTML | 2024年 10月 31日 | |
Application note | Advantages of Using TPS65219 PMIC to Power AM62 Processor Versus a Discrete Power Design | PDF | HTML | 2024年 8月 13日 | |
Technical article | Addressing design challenges with user-programmable power-management integrated circuits | PDF | HTML | 2024年 1月 5日 | |
User guide | TPS65219 Non-Volatile Memory (NVM) Programming Guide | PDF | HTML | 2023年 7月 17日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS65219EVM-SKT — TPS65219 非揮發性記憶體 (NVM) 程式設計基板
TPS65219 非揮發性記憶體 (NVM) 程式設計基板使用 MSP430F5529 微控制器 (MCU),以供客戶針對 TPS65219 電源管理 IC (PMIC) 進行 NVM 編程。該基板也包含電源端子和所有 DC 穩壓器輸入和輸出的跨接器,以及通用於量測的測試點。此程式設計基板具備一個用於在焊接到原型板之前用於編程單元的通訊端。TPS65219EVM-SKT 可用於針對 RHB 5-mm x 5-mm (0.5 mm 節距) 封裝進行編程,而 TPS65219EVM-RSM 可用於為 RSM 4-mm x 4-mm (0.4 mm 封裝) 編程。
SLVRBL7 — TPS65219(-Q1) - Efficiency and Thermal-Estimator
支援產品和硬體
產品
多通道 IC (PMIC)
硬體開發
開發板
TPS6521905-NVM-XILINX-1 — TPS6521905 for Xilinx Zynq Ultrascale+ (Always On -1, -2, -1L, -2L)
支援產品和硬體
產品
多通道 IC (PMIC)
硬體開發
開發板
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
VQFN (RHB) | 32 | Ultra Librarian |
VQFN (RSM) | 32 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。