UCC28700

現行

具 PSR 和可編程纜線補償的定電壓、定電流 PWM

產品詳細資料

Vin (min) (V) 21 Vin (max) (V) 450 Iout (max) (A) 5 Operating temperature range (°C) -20 to 125 Control mode Primary-side regulation Topology Buck, Flyback Rating Catalog Vout (min) (V) 3.3 Vout (max) (V) 54 Features CC/CV output regulation, Cable compensation, Current limiting, DCM, Leading edge blanking, Low power, Overcurrent protection, PSR, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Iq (typ) (µA) 2000 Duty cycle (max) (%) 99
Vin (min) (V) 21 Vin (max) (V) 450 Iout (max) (A) 5 Operating temperature range (°C) -20 to 125 Control mode Primary-side regulation Topology Buck, Flyback Rating Catalog Vout (min) (V) 3.3 Vout (max) (V) 54 Features CC/CV output regulation, Cable compensation, Current limiting, DCM, Leading edge blanking, Low power, Overcurrent protection, PSR, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Iq (typ) (µA) 2000 Duty cycle (max) (%) 99
SOT-23 (DBV) 6 8.12 mm² 2.9 x 2.8
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
UCC28700-Q1 現行 具汽車級的小型一次側調節 PWM 控制器 Automotive qualified version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 16
類型 標題 日期
* Data sheet UCC2870x Constant-Voltage, Constant-Current Controller With Primary-Side Regulation datasheet (Rev. A) PDF | HTML 2014年 12月 12日
Application note Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021年 8月 31日
Application note L1 and L2 EV Charger Electric Vehicle Service Equipment Design Considerations (Rev. B) 2021年 6月 9日
Application note Minimize Standby Consumption for UCC287XX Family 2019年 8月 1日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Technical article Making a solar inverter more reliable than the sun PDF | HTML 2017年 8月 1日
Technical article Common challenges when choosing the auxiliary power supply for your Server PSU PDF | HTML 2017年 3月 20日
Application note Troubleshooting TI PSR controllers 2016年 10月 3日
Technical article USB Wall Chargers: Conveniences and Challenges PDF | HTML 2015年 10月 6日
White paper Control Challenges for Low Power AC/DC Converters 2015年 10月 2日
White paper Control Challenges for Low Power AC/DC Converters (PPT) 2015年 10月 2日
EVM User's guide Using the UCC28700EVM-068 (Rev. A) 2015年 9月 16日
Technical article Designing multiple output converters with primary side sensing PDF | HTML 2015年 8月 4日
Application note Analysis of Starting Up Performance for UCC28700 2014年 3月 11日
Application note UCC28700 5-W USB Flyback Design Review (Rev. C) 2014年 2月 21日
More literature Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter 2013年 10月 29日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28700EVM-068 — UCC28700 評估模組

The Texas Instruments UCC28700EVM-068 evaluation module (EVM) helps designers evaluate the performance of the UCC28700 Constant-Voltage, Constant-Current PWM with Primary-Side Regulation. The 5W EVM is used for evaluating an off line adapter for USB applications. It converts a 90V to 265V RMS (...)
使用指南: PDF
TI.com 無法提供
開發板

UCC28711EVM-160 — UCC28711 評估模組

The Texas Instruments UCC28711EVM-160 evaluation module (EVM) helps designers evaluate the performance of the UCC28711 Constant-Voltage, Constant-Current PWM with Primary-Side Regulation. The 5W EVM is used for evaluating an off line adapter for USB applications. It converts a 90V to 265V RMS (...)
使用指南: PDF
TI.com 無法提供
開發板

UCC28720EVM-212 — 適用於 USB 離線適配器的 UCC28720EVM-212 5W 評估模組

The UCC28720EVM-212 is a 5W evaluation module for evaluating an off line adapter for USB applications. It is intended for evaluation purposes and is not intended to be an end product. The UCC28720EVM-212 converters 100V to 240V RMS input voltage down to 5V DC, with a 1A current limit for USB (...)
使用指南: PDF
TI.com 無法提供
模擬型號

UCC2870x PSPICE Transient Model

SLUM455.ZIP (131 KB) - PSpice Model
模擬型號

UCC2870x TINA-TI Transient Reference Design

SLUM619.TSC (195 KB) - TINA-TI Reference Design
模擬型號

UCC2870x TINA-TI Transient Spice Model

SLUM617.ZIP (101 KB) - TINA-TI Spice Model
計算工具

SLUC381 MathCAD Design Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
UCC28700 具 PSR 和可編程纜線補償的定電壓、定電流 PWM UCC28700-Q1 具汽車級的小型一次側調節 PWM 控制器 UCC28701 具 PSR、NTC 選項和 0 mV 纜線補償的定電壓、定電流 PWM UCC28702 具 PSR、NTC 選項和 150mV 纜線補償的定電壓、定電流 PWM UCC28703 具 PSR、NTC 選項和 300mV 纜線補償的定電壓、定電流 PWM
計算工具

SLUC408 UCC28700 Excel 97 Design Tool

支援產品和硬體

支援產品和硬體

產品
AC/DC 和 DC/DC 控制器 (外部 FET)
UCC28700 具 PSR 和可編程纜線補償的定電壓、定電流 PWM UCC28700-Q1 具汽車級的小型一次側調節 PWM 控制器 UCC28701 具 PSR、NTC 選項和 0 mV 纜線補償的定電壓、定電流 PWM UCC28702 具 PSR、NTC 選項和 150mV 纜線補償的定電壓、定電流 PWM UCC28703 具 PSR、NTC 選項和 300mV 纜線補償的定電壓、定電流 PWM

許多 TI 參考設計包含 UCC28700

使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 6 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片