首頁 電源管理 閘極驅動器 隔離式閘極驅動器
首頁
電源管理
閘極驅動器
隔離式閘極驅動器

UCC5304

現行

適用於 GaNFET 和 MOSFET 且具有 5V UVLO 的 5kVrms、4A/6A 單通道絕緣式閘極驅動器

立即訂購
產品規格表

UCC5304

現行
產品規格表 立即訂購

產品詳細資料

Number of channels 1 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1414 Transient isolation voltage (VIOTM) (VPK) 8000 Power switch GaNFET, MOSFET Peak output current (A) 6 Features High CMTI Output VCC/VDD (max) (V) 18 Output VCC/VDD (min) (V) 6 Input supply voltage (min) (V) 3 Input supply voltage (max) (V) 5.5 Propagation delay time (µs) 0.028 Input threshold CMOS, TTL Operating temperature range (°C) -40 to 125 Rating Catalog Bootstrap supply voltage (max) (V) 1500 Rise time (ns) 5 Fall time (ns) 6 Undervoltage lockout (typ) (V) 5
Number of channels 1 Isolation rating Reinforced Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1414 Transient isolation voltage (VIOTM) (VPK) 8000 Power switch GaNFET, MOSFET Peak output current (A) 6 Features High CMTI Output VCC/VDD (max) (V) 18 Output VCC/VDD (min) (V) 6 Input supply voltage (min) (V) 3 Input supply voltage (max) (V) 5.5 Propagation delay time (µs) 0.028 Input threshold CMOS, TTL Operating temperature range (°C) -40 to 125 Rating Catalog Bootstrap supply voltage (max) (V) 1500 Rise time (ns) 5 Fall time (ns) 6 Undervoltage lockout (typ) (V) 5
SOIC (DWV) 8 67.275 mm² 5.85 x 11.5
  • Reinforced isolation
  • Single channel in DWV Package with 8.5-mm creepage distance
  • CMTI greater than 100-V/ns
  • 4-A peak source, 6-A peak sink output
  • Switching parameters:
    • 40-ns maximum propagation delay
    • 5-ns maximum delay matching
    • 5.5-ns maximum pulse-width distortion
    • 35-µs maximum VDD power-up delay
  • Up to 18-V VDD output drive supply
    • 5-V VDD UVLO
  • Operating temp. range (TA) –40°C to 125°C
  • Rejects input pulses shorter than 5-ns
  • TTL and CMOS compatible inputs
  • Reinforced isolation
  • Single channel in DWV Package with 8.5-mm creepage distance
  • CMTI greater than 100-V/ns
  • 4-A peak source, 6-A peak sink output
  • Switching parameters:
    • 40-ns maximum propagation delay
    • 5-ns maximum delay matching
    • 5.5-ns maximum pulse-width distortion
    • 35-µs maximum VDD power-up delay
  • Up to 18-V VDD output drive supply
    • 5-V VDD UVLO
  • Operating temp. range (TA) –40°C to 125°C
  • Rejects input pulses shorter than 5-ns
  • TTL and CMOS compatible inputs

The UCC5304 device is an isolated single-channel gate driver with 4-A peak-source and 6-A peak-sink current. It is designed to drive power MOSFETs and GaNFETs in PFC, Isolated AC/DC, DC/DC, and synchronous rectification applications, with fast switching performance and robust ground bounce protection through greater than 100-V/ns common-mode transient immunity (CMTI).

The UCC5304 is available in a 8.5 mm SOIC-8 (DWV) package and can support isolation voltage up to 5-kVRMS. Compared to an optocoupler, the UCC5304 family has lower part-to-part skew, lower propagation delay, higher operating temperature, and higher CMTI.

Protection features include: IN pin rejects input transient shorter than 5-ns; both input and output can withstand –2-V spikes for 200-ns, both supplies have undervoltage lockout (UVLO), and active pull down protection clamps the output below 2.1-V when unpowered or floated.

With these features, this device enables high efficiency, high power density, and robustness in a wide variety of power applications.

The UCC5304 device is an isolated single-channel gate driver with 4-A peak-source and 6-A peak-sink current. It is designed to drive power MOSFETs and GaNFETs in PFC, Isolated AC/DC, DC/DC, and synchronous rectification applications, with fast switching performance and robust ground bounce protection through greater than 100-V/ns common-mode transient immunity (CMTI).

The UCC5304 is available in a 8.5 mm SOIC-8 (DWV) package and can support isolation voltage up to 5-kVRMS. Compared to an optocoupler, the UCC5304 family has lower part-to-part skew, lower propagation delay, higher operating temperature, and higher CMTI.

Protection features include: IN pin rejects input transient shorter than 5-ns; both input and output can withstand –2-V spikes for 200-ns, both supplies have undervoltage lockout (UVLO), and active pull down protection clamps the output below 2.1-V when unpowered or floated.

With these features, this device enables high efficiency, high power density, and robustness in a wide variety of power applications.

filter 尋找其它 隔離式閘極驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
類型 標題 日期
* Data sheet UCC5304 4-A Source, 6-A Sink Single-Channel Reinforced Isolation Gate Driver With High Noise Immunity datasheet (Rev. B) PDF | HTML 2020年 4月 20日
Application brief The Use and Benefits of Ferrite Beads in Gate Drive Circuits PDF | HTML 2021年 12月 16日
Application note Zero-Voltage-Switching Flyback Using UCC28780 Controller and UCC5304 Isolated Sy 2020年 7月 30日
EVM User's guide Using the UCC5304EVM-035 2020年 1月 30日
User guide Gate Drive Voltage vs. Efficiency 2019年 4月 25日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC28781EVM-053 — 適用於車用 500-Vdc 輸入 ZVS 返馳電源供應器應用的 UCC28781-Q1 評估模組

UCC28781EMV-053 展示了使用零電壓切換返馳 (ZVSF) 控制器的 60-W、15-V 輸出的高效率，高密度，高壓汽車偏壓電源。UCC28781-Q1 直接驅動一次側矽 MOSFET，並透過 UCC5304 絕緣式閘極驅動器驅動二次側同步整流器，以提升效率並達到 ZVS。

使用指南: PDF | HTML
TI.com 無法提供
開發板

UCC5304EVM-035 — UCC5304 隔離式單通道閘極驅動器評估模組

The UCC5304EVM is designed for evaluating UCC5304, which is an isolated single-channel gate driver with 4-A source and 6-A sink peak current capability. This EVM serves as a reference design for driving power MOSFETs with up to 18V drive voltage, UCC5304 pin function identification, components (...)
使用指南: PDF
TI.com 無法提供
模擬型號

SIMPLIS Model for UCC5304

SLUM722.ZIP (25 KB) - SIMPLIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
參考設計

PMP22495 — 176-VAC 至 264-VAC 輸入 24-V 150-W 主動箝位順向參考設計

此參考設計使用 UCC2897A 主動鉗位順向控制器，將 176-VAC 至 264-VAC 輸入轉換為 24-VDC 輸出，具有最大功率 150 W。UCC5304 隔離式閘極驅動器可用於驅動高電壓箝位 FET。該設計通過二極體整流達到 > 92% 的效率。二次側電流感測可透過定電流穩壓迴路，提供精準的過電流防護。此設計通過了 CISPR 32 傳導式排放測試。
Test report: PDF
參考設計

PMP22322 — 65-W USB Type-C® ZVS 返馳參考設計

此參考設計為低成本、高密度 USB 轉接器，在 ZVS 返馳拓撲中使用 UCC28782 主動箝位返馳控制器和 UCC5304 隔離式驅動器。在 20-V 輸出時最大功率額定值為 65 W，但可針對 20-V/15-V/9-V/5-V 輸出電壓和 3 A 進行調整。此設計的峰值效率達 93.4%。平均效率和待機功率位準的設計符合 DoE Level VI 和 CoC Tier 2 限制。精巧設計尺寸爲 44 mm x 54 mm x 20 mm (48 cc 開放式框架)。
使用指南: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (DWV) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片