UCD90124
- Monitor and Sequence 12 Voltage Rails
- All Rails Sampled Every 400 µs
- 12-bit ADC With 2.5-V, 0.5% Internal VREF
- Sequence Based on Time, Rail and Pin Dependencies
- Four Programmable Undervoltage and Overvoltage
Thresholds per Monitor
- Fan Control and Monitoring
- Supports Four Fans With Five User-Defined
Speed-vs-Temperature Setpoints - Supports Two-, Three-, and Four-Wire Fans
- Supports Four Fans With Five User-Defined
- Nonvolatile Error and Peak-Value Logging per Monitor
(up to 10 Fault Detail Entries) - Closed-Loop Margining for 10 Rails
- Margin Output Adjusts Rail Voltage to Match
User-Defined Margin Thresholds
- Margin Output Adjusts Rail Voltage to Match
- Programmable Watchdog Timer and System Reset
- Flexible Digital I/O Configuration
- Multiphase PWM Clock Generator
- Clock Frequencies From 15.259 kHz to 125 MHz
- Capability to Configure Independent Clock Outputs for
Synchronizing Switch-Mode Power Supplies
- Internal Temperature Sensor
- JTAG and I2C/SMBus/PMBus™ Interfaces
- APPLICATIONS
- Industrial / ATE
- Telecommunications and Networking Equipment
- Servers and Storage Systems
- Embedded Computing
- Any System Requiring Sequencing and Monitoring of
Multiple Power Rails
PMBus, Fusion Digital Power are trademarks of Texas Instruments.
The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124 offers support for fan control, margining, and general-purpose PWM functions.
Fan-control signals can be sent using PMBus commands or generated from one of two built-in fan-control algorithms. PWM outputs combined with temperature and fan-speed measurements provide a complete fan-control solution for up to four independent fans.
The TI Fusion Digital Power designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.
最新版 UCD90xxx PMBus™ 命令參考可在 https://www.ti.com/fusiondocs 取得
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | UCD90124 12-Rail Sequencer and System Health Monitor With Fan Control datasheet (Rev. B) | 2010年 9月 3日 | |
| * | Errata | Errata Report for the UCD90120 and UCD90124 Devices | 2010年 4月 26日 | |
| Application note | Design Voltage Margining Circuit for UCD90xxx Power Sequencer and System Manager (Rev. A) | 2019年 5月 21日 | ||
| Application note | UCD90xxx Family Frequently Asked Questions and Answers (Rev. B) | 2019年 4月 12日 | ||
| User guide | UCD90xxx Sequencer and System Health Controller PMBus™ Command Reference (Rev. G) | 2019年 4月 3日 | ||
| Application note | Monitoring Voltage, Current and Temperature Using the UCD9012x | 2012年 3月 23日 | ||
| User guide | UCD90SEQ64EVM-650: 64-Pin Sequencer Development Board | 2010年 12月 27日 | ||
| EVM User's guide | UCD90120/4 EVM User's Guide | 2009年 10月 6日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
UCD90SEQ64EVM-650 — 用於 UCD90xxx 64 針腳序列發生器和系統安全監控器的評估模組
The UCD90SEQ64EVM-650 is a fully assembled and tested circuit for evaluating the 64-pin Sequencer and System Health Controller, including the UCD90120, UCD90124, UCD90120A, UCD90124A, UCD90910 and UCD90160.
FUSION_DIGITAL_POWER_DESIGNER — 數位電源軟體
FUSION_MFR_GUI — Fusion Digital Power 製造工具
The MFR GUI supports the same devices as Fusion Digital Power Designer software. This tool is typically used in manufacturing (...)
SLVC676 — UCD90xxx Voltage Margining Circuit Design Tool
支援產品和硬體
產品
序列器
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VQFN (RGC) | 64 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點