Startseite Energiemanagement AC/DC- und DC/DC-Controller (externer FET)

LM5023

AKTIV

PWM-Controller zu AC/DC-Wandlung im quasiresonanten Strombetrieb

Produktdetails

Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback Rating Catalog Features Leading edge blanking, Light load efficiency, Overvoltage protection, Quasi-Resonant, Secondary-side regulated, Skip cycle mode, TM Duty cycle (max) (%) 100
Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback Rating Catalog Features Leading edge blanking, Light load efficiency, Overvoltage protection, Quasi-Resonant, Secondary-side regulated, Skip cycle mode, TM Duty cycle (max) (%) 100
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Critical Conduction Mode
  • Peak-Current Mode Control
  • Skip-Cycle Mode for Low-Standby Power
  • Hiccup Mode for Continuous Overload Protection
  • Cycle-by-Cycle Overcurrent Protection Maintains
    Accuracy Over the Universal AC Line
  • Line-Voltage Feedforward
  • OVP Protection by Sensing the Auxiliary Winding
  • Integrated 0.7-A Peak Gate Driver
  • Direct Opto-Coupler Interface
  • Leading Edge Blanking of Current Sense Signal
  • Maximum Frequency Clamp 130 kHz
  • Programmable Soft-Start
  • Thermal Shutdown
  • 8-Pin VSSOP Package
  • Critical Conduction Mode
  • Peak-Current Mode Control
  • Skip-Cycle Mode for Low-Standby Power
  • Hiccup Mode for Continuous Overload Protection
  • Cycle-by-Cycle Overcurrent Protection Maintains
    Accuracy Over the Universal AC Line
  • Line-Voltage Feedforward
  • OVP Protection by Sensing the Auxiliary Winding
  • Integrated 0.7-A Peak Gate Driver
  • Direct Opto-Coupler Interface
  • Leading Edge Blanking of Current Sense Signal
  • Maximum Frequency Clamp 130 kHz
  • Programmable Soft-Start
  • Thermal Shutdown
  • 8-Pin VSSOP Package

The LM5023 is a quasi-resonant pulse width modulated (PWM) controller which contains all of the features needed to implement a highly efficient off-line power supply. The LM5023 uses the transformer auxiliary winding for demagnetization detection to ensure critical conduction mode (CrCM) operation. The LM5023 features a hiccup mode for overcurrent protection with an auto restart to reduce the stress on the power components during an overload. A skip-cycle mode reduces power consumption at light loads for energy conservation applications (ENERGY STAR®, CEPCP, and so forth). The LM5023 also uses the transformer auxiliary winding for output overvoltage protection (OVP); if an OVP fault is detected the LM5023 latches off the controller.

The LM5023 is a quasi-resonant pulse width modulated (PWM) controller which contains all of the features needed to implement a highly efficient off-line power supply. The LM5023 uses the transformer auxiliary winding for demagnetization detection to ensure critical conduction mode (CrCM) operation. The LM5023 features a hiccup mode for overcurrent protection with an auto restart to reduce the stress on the power components during an overload. A skip-cycle mode reduces power consumption at light loads for energy conservation applications (ENERGY STAR®, CEPCP, and so forth). The LM5023 also uses the transformer auxiliary winding for output overvoltage protection (OVP); if an OVP fault is detected the LM5023 latches off the controller.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 10
Typ Titel Datum
* Data sheet LM5023 AC-DC Quasi-Resonant Current Mode PWM Controller datasheet (Rev. E) PDF | HTML 06 Jan 2016
White paper Power Electronics in Motor Drives: Where is it? (Rev. A) 01 Okt 2019
Selection guide Power Management Guide 2018 (Rev. R) 25 Jun 2018
EVM User's guide Using the UCC24630EVM-636 65-W AC-to-DC Adapter (Rev. B) 12 Dez 2016
More literature Design review of a 2-kW parallelable power supply module 17 Aug 2016
More literature Design review of a 2-kW parallelable power supply module (PPT) 17 Aug 2016
More literature Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter 29 Okt 2013
Test report PMP8655 Test Results 11 Okt 2013
Application note LM5023-2EVM Notebook Adapter 12 Feb 2013
Product overview LM5023 Product Bulletin 08 Feb 2013

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM5023-2NBEVM — Evaluierungsmodul für Notebook-Adapter LM5023 19V 65W

The Texas Instruments LM5023-2NBEVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM5023 AC-DC Quasi-Resonant Current Mode PWM Controller. This is a 65W evaluation modules for off-line notebook adapter applications.

Evaluierungsplatine

UCC24630EVM-636 — UCC24630 65 W, AC/DC-Adapter

This is a high efficiency 65W AC/DC design using UCC24630 Synchronous Rectification Controller for a Universal input (85Vac to 265Vac) to 19.5V @3.33A output exceeding CoC-5 Tier2 and DOE Level VI performance requirements for external power supplies.

Benutzerhandbuch: PDF
Evaluierungsplatine

UCC28740EVM-525 — UCC28740EVM-525-Evaluierungsmodul

The UCC28740EVM-525 evaluation module is a 10W off-line discontinuous mode (DCM) flyback converter that provides constant-voltage (CV) and constant-current (CC) output regulation. It uses optical coupler feedback for tight voltage regulation and improved the transient response to large load steps (...)

Benutzerhandbuch: PDF
Simulationsmodell

LM5023 TINA-TI Transient Reference Design

SNVM471.TSC (1447 KB) - TINA-TI Reference Design
Simulationsmodell

LM5023 TINA-TI Transient Spice Model

SNVM472.ZIP (23 KB) - TINA-TI Spice Model
Simulationsmodell

LM5023 Unencrypted PSpice Transient Model Package (Rev. A)

SNVM463A.ZIP (46 KB) - PSpice Model
Referenzdesigns

PMP8740 — Referenzdesign für industrielles AC/DC-Ladegerät mit 2 kW und 92 % Volllastwirkungsgrad

This reference design is a module that can be set as standard power supply or a battery charger. The output voltage ranges from 0 V to 32 V at a maximum current of 62.5 A. It consists of four boards, a boost PFC, a phase shift full bridge, a small daughter board (hosting the microcontroller), and (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP20815 — 95 VAC–130 Vac bis 24 V/72 W, Flyback-Referenzdesign

The PMP20815 reference design is a DCM Flyback with Optocoupler feedback. It operates at a 130kHz switching frequency to reduce transformer size. The reference design converts low-line AC mains to a 24V/72W output at 91% efficiency.
Test report: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-00519 — 65 W, Hocheffizienter CoC-5 Tier2/DOE Level VI-AC-Adapter

This is a high efficiency 65W AC/DC design for a Universal input (85Vac to 265Vac) to 19.5V @3.33A output exceeding CoC-5 Tier2 and DOE Level VI requirements for external power supplies using the LM5023 Quasi-Resontant Flyback Controller with UCC24630 Synchronous Rectification Controller and (...)
Schaltplan: PDF
Referenzdesigns

PMP30047 — Referenzdesign für Ladegerät, 16 V bis 32 Volt bei 2 A, für Bleisäureakku mit zwei Elementen von 170

A quasi-resonant isolated flyback is employed to charge two lead-acid battery elements, starting from high-line mains. The converter accepts two external signals (referred to secondary side) to provide the reference voltages, which set output voltage and current. The converter shows good (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP4408 — Offline AC/DC, 120-W-Multiausgang, Flyback-Stromversorgung – Referenzdesign

The PMP4408 is a universal AC input, 120W flyback converter reference design. The LM5023 Quasi Resonant Flyback converter was chosen to get 2 high-efficiency isolated outputs. Additionally a downstream Buck converter, the TPS5402 enables 2 high-efficiency non-isolated outputs. The QR Flyback design (...)
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP7991 — Quasi-resonante isolierte Sperrwandler für hohe und große AC-Vin-Werte – Referenzdesign

PMP7991 is a quasi-resonant isolated flyback using the LM5023 controller IC. The design accepts an input voltage of 85VAC to 265VAC and provides a selectable output of 12Vout or 5Vout capable of supplying 2A of current to the load. The quasi-resonant switching scheme helps to reduce EMI.
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP10100 — Referenzdesign für quasiresonanten Flyback-Wandler mit Offline-AC/DC, 75 W

The PMP10100 reference design uses the LM5023 flyback controller for the Quasi-Resonant Flyback Topology. It generates an isolated output (19.5V@3.84A) from an universal input (85VAC - 265VAC).
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP10035 — Offline-AC/DC, 75 W, 2-Schalter-Quasi-Resonanz-Flyback-Wandler – Referenzdesign

This design uses the LM5023 flyback controller for the 2-Switch Quasi-Resonant Flyback Topology. It generates an isolated output (19.5V@3.84A) from an universal input (85VAC - 265VAC).
Test report: PDF
Schaltplan: PDF
Referenzdesigns

PMP8955 — Programmierbarer Ausgang, Konstantspannung – Konstantstrom (CVCC) Quasi-Resonanz-Flyback-Ladegerät

This industrial charger reference design uses the LM5023 Quasi-Resonant Flyback controller to implement a 120VAC input design with CVCC output configured by microcontroller PWM control from 10 to 22.5V and output current from 200mA to 2A.
Test report: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSSOP (DGK) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos