LM51770
Bidirektionaler Abwärts-Aufwärtsregler, großer VIN-Bereich 78 V, 4 Schalter
LM51770
- Wide input range from 3.5V to 78V (85V absolute maximum)
- Minimum 2.8V when V(BIAS) > 3.5V
- Output voltage from 3.3V to 78V
- Low shutdown IQ of 3µA
- Low operating IQ of 60µA
- 3% reverse current limit accuracy for precise charging currents
- Average input and output current monitor or limiter
- Dynamic output voltage tracking for PWM or analog input signals
- Power save mode (PSM) selectable for high light load efficiency
- Two integrated high-voltage supply LDOs with automatic selection
- Fixed frequency across all operating modes (boost, buck-boost, buck)
- Forced PWM mode selectable
- Switching up to 1.8MHz for small solution and component size
- External clock synchronization
- Spread spectrum operation selectable
- Adjustable undervoltage protection
- Hiccup overcurrent and short protection
The LM51770 is a four switch buck-boost controller. The device provides a regulated output voltage if the input voltage is higher, equal, or lower than the adjusted output voltage. In power save mode, the device supports high efficiency with low output loads due to its low quiescence currents. In power save mode, the device supports high efficiency close to 99% efficiency over the full range of the output currentThe LM51770 runs at a fixed switching frequency, which can be set through the RT or SYNC pin. The switching frequency remains the same during buck, boost, and buck-boost operation. The integrated and optional average current monitor can help monitor and limit input and output current of the LM51770. This feature also supports charging backup power elements, like batteries or capacitors, with constant current (CC) and constant voltage (CV).
Technische Dokumentation
Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | LM51770 78-V Wide VIN Bidirectional 4-Switch Buck-Boost Controller datasheet | PDF | HTML | 06 Dez 2024 |
Application brief | Current Monitoring with Positive and Negative Currents on LM5177x Devices (Rev. A) | PDF | HTML | 25 Nov 2024 | |
Application note | Reverse Current Operation of the LM5177 Buck-Boost Converter | PDF | HTML | 16 Jul 2024 | |
Application note | Parallel Operation of the Buck-Boost Converters Using LM5177 Buck-Boost Controller (Rev. A) | PDF | HTML | 27 Feb 2024 | |
Application brief | A Simple Constant Voltage Regulation Using the MODE Pin (Rev. A) | PDF | HTML | 15 Feb 2024 | |
Application note | Layout Optimization of 4-Switch Buck-Boost Converters | PDF | HTML | 05 Sep 2023 | |
Application brief | Precise Current Limiter Over Wide Operation Voltages in Buck-Boost Converters | PDF | HTML | 05 Sep 2023 | |
Application brief | Dynamic Current Tracking With the LM5177 4-Switch Buck Boost Controller | 24 Feb 2023 | ||
Application brief | Constant Current Operation Using the Internal Current Limiter | 27 Jan 2023 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
LM5177EVM-HP — LM5177 Evaluierungsmodul mit 4-Schalter-Abwärts-Aufwärts-Controller
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
HTSSOP (DCP) | 38 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.