Startseite Energiemanagement AC/DC- und DC/DC-Wandler (integrierter FET)
Startseite
Energiemanagement
AC/DC- und DC/DC-Wandler (integrierter FET)
NEU

LM65645-Q1

VORSCHAU

Synchroner Abwärtswandler für die Automobilindustrie, 3 V bis 65 V, 4,5 A, optimiert für hohe Leistu

Jetzt bestellen
Datenblatt

LM65645-Q1

VORSCHAU
Datenblatt Jetzt bestellen

Produktdetails

Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 4.5 Vin (min) (V) 3 Vin (max) (V) 65 Switching frequency (min) (kHz) 360 Switching frequency (max) (kHz) 2420 Features Adjustable switching frequency, Auto Mode, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Overcurrent protection, Power good, Spread Spectrum, Thermal shutdown, UVLO adjustable EMI features Low parasitic Hotrod packaging, Spread Spectrum Vout (min) (V) 0.8 Vout (max) (V) 40 Duty cycle (max) (%) 98
Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable Topology Buck Type Converter Iout (max) (A) 4.5 Vin (min) (V) 3 Vin (max) (V) 65 Switching frequency (min) (kHz) 360 Switching frequency (max) (kHz) 2420 Features Adjustable switching frequency, Auto Mode, Enable, Fixed Output, Forced PWM, Frequency synchronization, Low Noise, Overcurrent protection, Power good, Spread Spectrum, Thermal shutdown, UVLO adjustable EMI features Low parasitic Hotrod packaging, Spread Spectrum Vout (min) (V) 0.8 Vout (max) (V) 40 Duty cycle (max) (%) 98
WQFN-FCRLF (RZT) 20 9.36 mm² 2.6 x 3.6
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Wide input voltage range: 3V to 65V
  • Designed for low EMI requirements
    • Facilitates CISPR 25 class 5 compliance
    • Mode pin configurable ±5% or ±10% dual-random spread spectrum reducing peak emissions
    • Enhanced HotRod™ QFN package with symmetrical pinout
    • Switching frequency from 300kHz to 2.2MHz
    • Pin-configurable 400kHz and 2.2MHz
    • Pin-configurable AUTO or FPWM operation
  • Low minimum on time: 40ns (maximum)
    • Enables 36V to 3.3V conversion at 2.2MHz
  • High-efficiency power conversion at all loads
    • > 94% peak efficiency at 24VIN, 5VOUT, 400kHz
    • 2.5µA PFM no-load input current
  • High power density
    • Internal compensation, current limit, and TSD
    • 3.6mm × 2.6mm, wettable flank, 20-pin package
    • ϴJA = 25.5°C/W (LM65645-Q1EVM)
  • Create a custom design using the LM656x5-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Wide input voltage range: 3V to 65V
  • Designed for low EMI requirements
    • Facilitates CISPR 25 class 5 compliance
    • Mode pin configurable ±5% or ±10% dual-random spread spectrum reducing peak emissions
    • Enhanced HotRod™ QFN package with symmetrical pinout
    • Switching frequency from 300kHz to 2.2MHz
    • Pin-configurable 400kHz and 2.2MHz
    • Pin-configurable AUTO or FPWM operation
  • Low minimum on time: 40ns (maximum)
    • Enables 36V to 3.3V conversion at 2.2MHz
  • High-efficiency power conversion at all loads
    • > 94% peak efficiency at 24VIN, 5VOUT, 400kHz
    • 2.5µA PFM no-load input current
  • High power density
    • Internal compensation, current limit, and TSD
    • 3.6mm × 2.6mm, wettable flank, 20-pin package
    • ϴJA = 25.5°C/W (LM65645-Q1EVM)
  • Create a custom design using the LM656x5-Q1 with the WEBENCH Power Designer

The LM656x5-Q1 are a family of automotive buck converters designed for high efficiency, high power density, and ultra-low electromagnetic interference (EMI). The converters operate over a wide input voltage range of 3V to 65V (70V tolerant) reducing the need for external input surge protection. The LM656x5-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. A pin-selectable ±5% or ±10% dual-random spread spectrum (DRSS) significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.

The LM656x5-Q1 are a family of automotive buck converters designed for high efficiency, high power density, and ultra-low electromagnetic interference (EMI). The converters operate over a wide input voltage range of 3V to 65V (70V tolerant) reducing the need for external input surge protection. The LM656x5-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. A pin-selectable ±5% or ±10% dual-random spread spectrum (DRSS) significantly reduces peak emissions through a combination of triangular and pseudo-random modulation while keeping output voltage ripple very low. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.
filter Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 11
Typ Titel Datum
* Data sheet LM656x5-Q1 High Performance Power Converter, 3V to 65V , Pin-Compatible, 2.5A/3.5A/4.5A, Automotive , Low EMI Synchronous Buck Converter datasheet PDF | HTML 05 Sep 2024
Application note Controller to Converter – Design Considerations for 24V and 48V Systems PDF | HTML 02 Okt 2024
EVM User's guide LM65645EVM Evaluation Module PDF | HTML 15 Jul 2024
Application note Reducing Conducted EMI in a Buck Converter for 48 V Automotive Applications PDF | HTML 13 Dez 2023
E-book An Engineer’s Guide to Low EMI in DC/DC Regulators 21 Apr 2021
Technical article Using DC/DCs buck converters to power modern safety features in commercial vehicle PDF | HTML 27 Jul 2020
Technical article How to meet European Commission ADAS requirements with TI DC/DC converters PDF | HTML 09 Mai 2019
Technical article Top three qualities to consider when designing a video doorbell power supply PDF | HTML 25 Sep 2018
White paper An overview of radiated EMI specifications for power supplies 05 Jun 2018
Technical article Effects of IC package on EMI performance PDF | HTML 22 Mai 2018
White paper An overview of conducted EMI specifications for power supplies 01 Feb 2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

LM65645EVM — LM65645 Evaluierungsmodul

Das LM65645-Evaluierungsmodul (EVM) hilft Entwicklern, den Betrieb und die Leistung der LM65645 Familie von Abwärtswandlern mit breiter Eingangsspannung zu bewerten. Bei der LM65645 Familie handelt es sich um einfach zu bedienende synchrone Abwärtswandler, die einen Laststrom von bis zu 2,5 A, (...)
Benutzerhandbuch: PDF | HTML
Nicht verfügbar auf TI.com
Berechnungstool

LM656X5-CALC — LM656x5 Quick start design calculator

Design calculator for LM656x5 family of converters
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC- und DC/DC-Wandler (integrierter FET)
LM65645-Q1 — Synchroner Abwärtswandler für die Automobilindustrie, 3 V bis 65 V, 4,5 A, optimiert für hohe Leistu
Herunterladen
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN-FCRLF (RZT) 20 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos