TPS25830-Q1

Name: TPS25830-Q1
Brand: TI
SKU: TPS25830-Q1
Price: 2.202 USD

AKTIV

USB-Typ-C®- und SDP/CDP-Ladeport-Wandler mit Kurzschluss-/BATT-Schutz und Kabelkompensation

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS2583x-Q1 Automotive USB Type-C® and BC1.2 5-V 3.5-A Output, 36-V Input datasheet (Rev. G) (Englisch)

TPS25830-Q1

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Type-C, USB2, USB3

Type

CC controller, DC/DC converter

Power role

Source

Alternate mode

No

External power-path control

No

Data role

DFP

Internal power path

5 V 3 A

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Function

Type-C, USB2, USB3

Type

CC controller, DC/DC converter

Power role

Source

Alternate mode

No

External power-path control

No

Data role

DFP

Internal power path

5 V 3 A

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Operating temperature range (°C)

-40 to 125

VQFN (RHB)

32

25 mm² 5 x 5

AEC-Q100 Qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T_A
- HBM ESD classification level H2
- CDM ESD classification level C5
Functional Safety-Capable
- Documentation available to aid functional safety system design
Synchronous buck DC/DC regulator
- Input voltage range: 4.5 V to 36 V
- Output current: 3.5 A
- 5.1-V output voltage with ±1% accuracy
- Current mode control
- Adjustable frequency: 300 kHz to 2.2 MHz
- Frequency synchronization to external clock
- FPWM with spread-spectrum dithering
- Internal compensation for ease of use
Compliant to USB-IF standards
- USB Type-C Rev 1.3
  - CC logic, V_CONN source and discharge
  - USB cable polarity detection (POL)
- CDP/SDP mode per USB BC1.2
- Automatic DCP modes (TPS25831-Q1 only)
  - DCP shorted mode and YD/T 1591-2009
  - 2.7-V divider 3 mode
  - 1.2-V mode
Optimized for USB power and communication
- User-programmable USB current limit
- Cable droop compensation up to 1.5 V
- High bandwidth data switches on DP and DM (TPS25830-Q1 only)
- NTC input for intelligent thermal management (TPS25831-Q1 only)
Integrated protection
- V_BUS Short-to-V_BAT protection
- DP_IN and DM_IN Short-to-V_BAT and V_BUS
- CC1 and CC2 Short-to-V_BAT protection
- DP_IN, DM_IN, CCx IEC 61000-4-2 rated
  - ±-8kV contact and ±15-kV air discharge
Fault flag reports
32-pin QFN package with wettable flank

AEC-Q100 Qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T_A
- HBM ESD classification level H2
- CDM ESD classification level C5
Functional Safety-Capable
- Documentation available to aid functional safety system design
Synchronous buck DC/DC regulator
- Input voltage range: 4.5 V to 36 V
- Output current: 3.5 A
- 5.1-V output voltage with ±1% accuracy
- Current mode control
- Adjustable frequency: 300 kHz to 2.2 MHz
- Frequency synchronization to external clock
- FPWM with spread-spectrum dithering
- Internal compensation for ease of use
Compliant to USB-IF standards
- USB Type-C Rev 1.3
  - CC logic, V_CONN source and discharge
  - USB cable polarity detection (POL)
- CDP/SDP mode per USB BC1.2
- Automatic DCP modes (TPS25831-Q1 only)
  - DCP shorted mode and YD/T 1591-2009
  - 2.7-V divider 3 mode
  - 1.2-V mode
Optimized for USB power and communication
- User-programmable USB current limit
- Cable droop compensation up to 1.5 V
- High bandwidth data switches on DP and DM (TPS25830-Q1 only)
- NTC input for intelligent thermal management (TPS25831-Q1 only)
Integrated protection
- V_BUS Short-to-V_BAT protection
- DP_IN and DM_IN Short-to-V_BAT and V_BUS
- CC1 and CC2 Short-to-V_BAT protection
- DP_IN, DM_IN, CCx IEC 61000-4-2 rated
  - ±-8kV contact and ±15-kV air discharge
Fault flag reports
32-pin QFN package with wettable flank

The TPS2583x-Q1 is a USB Type-C and BC1.2 charging port controller that includes a synchronous DC/DC converter. With cable droop compensation, the V_BUS voltage remains constant regardless of load current, ensuring connected portable devices are charged at optimal current and voltage.

The TPS2583x-Q1 also integrates short-to-battery protection on V_BUS, CC1, CC2, DM_IN and DP_IN pins. These pins can withstand voltage up to 18 V.

The TPS25830-Q1 includes high bandwidth analog switches for DP and DM pass-through, while the TPS25831-Q1 includes a thermistor input pin and thermal warning flag for user programmable thermal overload protection.

The TPS2583x-Q1 is a USB Type-C and BC1.2 charging port controller that includes a synchronous DC/DC converter. With cable droop compensation, the V_BUS voltage remains constant regardless of load current, ensuring connected portable devices are charged at optimal current and voltage.

The TPS2583x-Q1 also integrates short-to-battery protection on V_BUS, CC1, CC2, DM_IN and DP_IN pins. These pins can withstand voltage up to 18 V.

The TPS25830-Q1 includes high bandwidth analog switches for DP and DM pass-through, while the TPS25831-Q1 includes a thermistor input pin and thermal warning flag for user programmable thermal overload protection.

filter

Andere USB-Typ-C- und USB-Stromversorgungs-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 11

	Typ	Titel		Datum
*	Data sheet	TPS2583x-Q1 Automotive USB Type-C® and BC1.2 5-V 3.5-A Output, 36-V Input datasheet (Rev. G)		21 Mär 2022
	Application note	TPS25830, TPS25831-Q1, and TPS25840-Q1 Short-to-Battery Application (Rev. A)	PDF \| HTML	02 Jun 2023
	Functional safety information	TPS25830-Q1 Functional Safety, FIT Rate, and Failure Mode Distribution	PDF \| HTML	20 Jul 2020
	Application note	PCB Layout and Parameters Recommendation for TPS2583X EMC Performance		25 Mär 2020
	Application note	How to Pass MFi Overcurrent Protection Test With USB Charger and Switch Device	PDF \| HTML	26 Feb 2020
	Application note	How to Improve an Eye Diagram With the TPS25840-Q1 Device Using a Long USB Cable		10 Jan 2020
	Application note	Ground Shift Phenomenon Recommendation of TPS2583x	PDF \| HTML	02 Dez 2019
	Application note	Loop Characteristic Evaluation and Optimization of TPS2583x	PDF \| HTML	02 Dez 2019
	Technical article	How to avoid the pain of a discharged device	PDF \| HTML	21 Aug 2019
	Application note	How to Pass MFI VBUS Spec with USB Charger TPS2583x-Q1		30 Mai 2019
	User guide	TPS25830-Q1 Evaluation Module (Rev. A)		09 Jan 2019

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS25830Q1EVM-040 — TPS25830-Q1-Evaluierungsmodul für USB Type-C® und BC1.2 mit Kabelkompensation und Strombegrenzung

Das TPS25830Q1EVM-040 ist ein Evaluierungsmodul (EVM) für synchrone Abwärtswandler gemäß USB Type-C® und BC1.2, Ausgang 5 V, 3,5 A, Eingang 36 V, mit Kabelkompensation. Das EVM verfügt über einen Leistungsanschlussklemmenblock sowie USB-Typ-A- und USB-Typ-C-Anschlüsse zum Laden von (...)

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Simulationsmodell

TPS25830-Q1 PSPICE Transient Ecrypted Model

SLVMD42.ZIP (203 KB) - PSpice Model

Herunterladen

Gerberdatei

TPS2583x and TPS2584x Far-End VBUS Accuracy Calculation with Cable Compensation

SLVC781.ZIP (176 KB)

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Referenzdesigns

PMP30338 — Referenzdesign für USB Typ C mit zwei Anschlüssen für die Automobilindustrie (2x 15 W)

This reference design showcases a system implementation of a dual port USB Type-C charger. The design includes input reverse polarity protection, input filtering and two individual USB Type-C charger circuits, which can supply up to 3.0 A each. The circuit has been space optimized to fit into a (...)

Test report: PDF

Schaltplan: PDF

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
VQFN (RHB)	32	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TPS25830-Q1

USB-Typ-C®- und SDP/CDP-Ladeport-Wandler mit Kurzschluss-/BATT-Schutz und Kabelkompensation

TPS25830-Q1

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

TPS25830Q1EVM-040 — TPS25830-Q1-Evaluierungsmodul für USB Type-C® und BC1.2 mit Kabelkompensation und Strombegrenzung

TPS25830-Q1 PSPICE Transient Ecrypted Model

TPS2583x and TPS2584x Far-End VBUS Accuracy Calculation with Cable Compensation

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

PMP30338 — Referenzdesign für USB Typ C mit zwei Anschlüssen für die Automobilindustrie (2x 15 W)

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos