TPS389006
I²C programmierbare Mehrkanal-Überspannungs- und Unterspannungs-Spannungsüberwachung
TPS389006
- Functional Safety-Compliant
- Development target for Functional Safety applications
- Documentation to aid IEC 61508 system design
- Systematic capability up to SIL 3
- Hardware capability up to SIL 3
- Monitor state-of-the art SOCs
- ±6 mV threshold accuracy (–40°C to +125°C)
- Input voltage range: 2.5 V to 5.5 V
- Undervoltage lockout (UVLO): 2.48 V
- Low standby quiescent current: 200 µA
- 6 channels with 2 remote sense
- Fixed window threshold levels
- 5 mV steps from 0.2 V to 1.475 V
- 20 mV steps from 0.8 V to 5.5 V
- Miniature solution and minimal component cost
- 3 mm x 3 mm QFN package
- Adjustable glitch immunity via I 2C
- User adjustable voltage threshold levels via I 2C
- Designed for safety applications
- Active-low open-drain NIRQ output
- Built-in 8-bit ADC for real-time voltage readouts
- Cyclic Redundancy Checking (CRC)
- Packet Error Checking (PEC)
- Sequence and fault logging
- Sync function for rail tagging
- Connect with a multichannel sequencer for sequencing functionality
The TPS389006 device is a SIL-3 compliant six-channel window supervisor IC with two remote sense pins available in a 16-pin 3 mm x 3 mm QFN package. This high accuracy multichannel voltage supervisor is designed for systems that operate on low-voltage supply rails and have narrow margin supply tolerances.
Remote sense pins enable a highly accurate voltage measurement on the high current core rail by accounting for voltage drop across PCB traces. I 2C functionality gives flexibility in selecting thresholds, reset delays, glitch filters, and pin functionality. The internal glitch immunity and noise filters eliminate the need for external RC components to reduce false resets resulting from power transients. In addition, device does not require any external resistors for setting overvoltage and undervoltage reset thresholds, which further optimizes overall accuracy, cost, solution size, and improves reliability for safety systems.
This device offers CRC error checking, sequence logging during turn ON or turn OFF, and a built-in ADC for voltage readouts to provide redundant error checking. In addition, TPS389006 offers a sync feature for tagging rails as they come up. The TPS389006 device also pairs with TI’s power-supply sequencer TPS38700 to ensure proper power-on sequence in addition to voltage monitoring for SIL-3 level compliance.
Technische Dokumentation
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
TPS389006Q1EVM — TPS38900-Evaluierungsmodul für Mehrkanal-, Über- und Unterspannungs-, I²C-Spannungsüberwacher
Das TPS389006Q1-Evaluierungsmodul (EVM) ist eine Plattform zur Evaluierung des Sechskanal-TPS389006-Q1, eines integrierten Überspannungs- und Unterspannungsüberwachers mit I2C-Programmierbarkeit. TPS389006-Q1 ist in einem 16-poligen, sehr dünnen Vierfach-Flachgehäuse (WQFN) ohne Anschlussleitungen (...)
TPS389387EVM — Gemeinsames Evaluierungsmodul für TPS389006 und TPS38700S-Q1
PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
WQFN (RTE) | 16 | Ultra Librarian |
Bestellen & Qualität
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
- Werksstandort
- Montagestandort
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.