Startseite Energiemanagement Mehrkanal-ICs (PMICs)

TPS43331-Q1

AKTIV

Dual LDO & Dual synchroner Abwärtsregler für die Automobilindustrie, 5 bis 30 V

Produktdetails

Processor supplier Generic Processor name Generic Regulated outputs (#) 4 Step-down DC/DC converter 0 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 5 Vin (max) (V) 30 Vout (min) (V) 1.2 Vout (max) (V) 10 Iout (max) (A) 4 Configurability Hardware configurable Features Enable, I2C control, Power good, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Automotive Operating temperature range (°C) -40 to 125 Step-down DC/DC controller 2 Step-up DC/DC controller 0 Iq (typ) (mA) 0.065 Switching frequency (max) (kHz) 400 Product type Microcontrollers
Processor supplier Generic Processor name Generic Regulated outputs (#) 4 Step-down DC/DC converter 0 Step-up DC/DC converter 0 LDO 2 Vin (min) (V) 5 Vin (max) (V) 30 Vout (min) (V) 1.2 Vout (max) (V) 10 Iout (max) (A) 4 Configurability Hardware configurable Features Enable, I2C control, Power good, Synchronous rectification, Thermal shutdown, UVLO fixed Rating Automotive Operating temperature range (°C) -40 to 125 Step-down DC/DC controller 2 Step-up DC/DC controller 0 Iq (typ) (mA) 0.065 Switching frequency (max) (kHz) 400 Product type Microcontrollers
HTSSOP (DAP) 38 101.25 mm² 12.5 x 8.1
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
    • Device HBM ESD Classification Level 2
  • Input Operating Range 5 V to 30 V (VBAT)
  • Two, Adjustable Output Voltage, Step-Down Switching Voltage Regulators
  • External Clock Input
  • Soft-Start Control for Step-Down Regulators
  • Programmable, Linear Regulator (VSTBY), Low Quiescent Current (65 µA typ)
  • Programmable, Linear Regulator (VLR)
  • Overvoltage Detection and Shutdown
  • Protected, High-Side Drive Ouput (HSD)
  • Power-On Reset for Standby Regulator (VSTBY)
  • Serial Communication, I2C Interface
  • Low Voltage Warning Detection With Programmable Input Threshold (LVWIN, VBATW)
  • Enable Feature, Controls VBUCK 1
  • Programmable Power Good Delay Time (PGDLY) for VSTBY
  • Current-Limit and Independent Thermal Detection and Shutdown Protection on All Regulators and High-Side Driver Output
  • Thermally Enhanced 38-Pin DAP PowerPAD™ Package
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
    • Device HBM ESD Classification Level 2
  • Input Operating Range 5 V to 30 V (VBAT)
  • Two, Adjustable Output Voltage, Step-Down Switching Voltage Regulators
  • External Clock Input
  • Soft-Start Control for Step-Down Regulators
  • Programmable, Linear Regulator (VSTBY), Low Quiescent Current (65 µA typ)
  • Programmable, Linear Regulator (VLR)
  • Overvoltage Detection and Shutdown
  • Protected, High-Side Drive Ouput (HSD)
  • Power-On Reset for Standby Regulator (VSTBY)
  • Serial Communication, I2C Interface
  • Low Voltage Warning Detection With Programmable Input Threshold (LVWIN, VBATW)
  • Enable Feature, Controls VBUCK 1
  • Programmable Power Good Delay Time (PGDLY) for VSTBY
  • Current-Limit and Independent Thermal Detection and Shutdown Protection on All Regulators and High-Side Driver Output
  • Thermally Enhanced 38-Pin DAP PowerPAD™ Package

The TPS43331-Q1 is a multi-rail output voltage regulator, with two synchronous switch mode controllers and two linear regulators. In addition, there is a reverse protected high side switch and voltage supervisor for monitoring the standby regulator and input voltage. The regulator outputs and high side switch are controlled either by discrete inputs for certain outputs and serial interface using the I2C configuration for outputs not controlled by discrete inputs.

The standby linear regulator (VSTBY) is high voltage tolerant and can be connected directly to the vehicle battery, the quiescent current is typically 65 µA to maintain a regulated output with light loads.

The TPS43331-Q1 is a multi-rail output voltage regulator, with two synchronous switch mode controllers and two linear regulators. In addition, there is a reverse protected high side switch and voltage supervisor for monitoring the standby regulator and input voltage. The regulator outputs and high side switch are controlled either by discrete inputs for certain outputs and serial interface using the I2C configuration for outputs not controlled by discrete inputs.

The standby linear regulator (VSTBY) is high voltage tolerant and can be connected directly to the vehicle battery, the quiescent current is typically 65 µA to maintain a regulated output with light loads.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein
TPS43340-Q1 AKTIV Zweifacher synchroner Abwärtsregler (Buck) für die Automobilindustrie, 4 bis 40 V, Abwärtswandler (B This product has a wider voltage operation.
TPS65300-Q1 AKTIV Abwärtswandler (Buck) für die Automobilindustrie, 5,6 bis 40 V, 1,2 A, mit 3 LDOs This product has a wider voltage operation.

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet TPS43331-Q1 Dual Switcher and Linear Regulators datasheet (Rev. B) PDF | HTML 20 Jul 2017
White paper Power Management IC (PMIC) Guide for Automotive (Rev. A) 29 Okt 2014

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

TPS43331-Q1 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM990A.ZIP (175 KB) - PSpice Model
Berechnungstool

TPS43331-Q1-DESIGN-CAL-TOOL TPS43331-Q1 Design Calculation Tool

The worksheet is designed for use with Microsoft Excel 2007. It intends to assist circuit designer in their day-to-day calculations.

This worksheet includes two segments:

Recommendation:
Calculate the minimum requirements for different components to guarantee the input voltage, output voltage or other (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Mehrkanal-ICs (PMICs)
TPS43331-Q1 Dual LDO & Dual synchroner Abwärtsregler für die Automobilindustrie, 5 bis 30 V
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
HTSSOP (DAP) 38 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos