NEU

TPS548B23

VORSCHAU

Synchroner Abwärtswandler, 4 V bis 16 V Eingangsspannung, 20 A

alarmBenachrichtigungen Jetzt bestellen

Produktdetails

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 20 Vin (min) (V) 4 Vin (max) (V) 16 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1200 Features Adjustable soft start, Differential Remote Sense, Eco-mode, Hiccup mode protection, Over Current Protection, Over Voltage Protection, Power good, Pre-Bias Start-Up, Under Voltage Protection Control mode D-CAP4 Vout (min) (V) 0.5 Vout (max) (V) 5.5 Iq (typ) (µA) 1000 Duty cycle (max) (%) 30
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 20 Vin (min) (V) 4 Vin (max) (V) 16 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1200 Features Adjustable soft start, Differential Remote Sense, Eco-mode, Hiccup mode protection, Over Current Protection, Over Voltage Protection, Power good, Pre-Bias Start-Up, Under Voltage Protection Control mode D-CAP4 Vout (min) (V) 0.5 Vout (max) (V) 5.5 Iq (typ) (µA) 1000 Duty cycle (max) (%) 30
WQFN-HR (VAN) 19 9 mm² 3 x 3
  • 4V to 16V input voltage range
  • 3.13V to 5.3V external VCC bias support
  • 10mΩ and 3.3mΩ MOSFETs (VVCC = 3.3V)
  • 20A continuous output current
  • Optimized 19-pin WQFN-HR package for efficiency and thermal performance
  • ±1.0% reference (VREF) for TJ = –40°C to +125°C
  • 0.5V to 5.5V output voltage range
  • Differential remote sense
  • D-CAP4 with ultra fast load-step response
  • Supports all ceramic output capacitors
  • Selectable auto-skip Eco-mode for high light-load efficiency
  • Programmable valley current limit
  • 600kHz, 800kHz, 1.0MHz, 1.2MHz selectable switching frequency:
  • Programmable soft-start time
  • Prebiased start-up capability
  • Open-drain power-good output
  • Overvoltage and undervoltage fault protection
  • 3mm × 3mm (0.4mm pin pitch), 19-pin QFN package
  • Pin-to-pin compatible with 12A TPS548A23 and 6A TPS548623
  • 4V to 16V input voltage range
  • 3.13V to 5.3V external VCC bias support
  • 10mΩ and 3.3mΩ MOSFETs (VVCC = 3.3V)
  • 20A continuous output current
  • Optimized 19-pin WQFN-HR package for efficiency and thermal performance
  • ±1.0% reference (VREF) for TJ = –40°C to +125°C
  • 0.5V to 5.5V output voltage range
  • Differential remote sense
  • D-CAP4 with ultra fast load-step response
  • Supports all ceramic output capacitors
  • Selectable auto-skip Eco-mode for high light-load efficiency
  • Programmable valley current limit
  • 600kHz, 800kHz, 1.0MHz, 1.2MHz selectable switching frequency:
  • Programmable soft-start time
  • Prebiased start-up capability
  • Open-drain power-good output
  • Overvoltage and undervoltage fault protection
  • 3mm × 3mm (0.4mm pin pitch), 19-pin QFN package
  • Pin-to-pin compatible with 12A TPS548A23 and 6A TPS548623

The TPS548B23 device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components. The device is well-designed for space-constrained data center applications.

The TPS548B23 device has differential remote sense, high-performance integrated MOSFETs, and an accurate ±1.0% internal reference. The device features accurate load and line regulation and Eco-mode or Forced Continous Conduction Mode (FCCM) operation. Pinstrap options allow for configuration of the overcurrent limit, fault response, internal or external feedback , output voltage selection, switching frequency, and soft-start time..

The internal 3.0V LDO can be over-driven with an external 3.3V to 5V supply through the VCC pin to improve efficiency and reduce power dissipation.

The TPS548B23 device is a lead-free device. The device is RoHS compliant without exemption.

The TPS548B23 device is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP4 control mode. The control method provides low minimum on-time and fast load-transient response across the entire output voltage range without requiring an external compensation network. Because external compensation is not required, the device is easy to use and requires few external components. The device is well-designed for space-constrained data center applications.

The TPS548B23 device has differential remote sense, high-performance integrated MOSFETs, and an accurate ±1.0% internal reference. The device features accurate load and line regulation and Eco-mode or Forced Continous Conduction Mode (FCCM) operation. Pinstrap options allow for configuration of the overcurrent limit, fault response, internal or external feedback , output voltage selection, switching frequency, and soft-start time..

The internal 3.0V LDO can be over-driven with an external 3.3V to 5V supply through the VCC pin to improve efficiency and reduce power dissipation.

The TPS548B23 device is a lead-free device. The device is RoHS compliant without exemption.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TPS548B23 4V to 16V Input, 20 A, Remote Sense, D-CAP4, Synchronous Buck Converter datasheet PDF | HTML 30 Sep 2024
Application note Point-of-Load Designs in Data Center Applications for Intel Xeon Sapphire Rapids Scalable Processors (Rev. C) PDF | HTML 09 Okt 2024
Application brief Solving Power Design Challenges in Enterprise SSD Applications PDF | HTML 23 Sep 2024
EVM User's guide TPS548B23 Step-Down Converter Evaluation Module User's Guide PDF | HTML 18 Sep 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPS548B23EVM — TPS548B23 Evaluierungsmodul

Das TPS548B23-Evaluierungsmodul (EVM) ist dazu ausgelegt, ein schnellen Setup für die Evaluierung des TPS548B23-Bausteins zu ermöglichen und sich mit dem PMIC vertraut zu machen. Dieses EVM kann einen kontinuierlichen Laststrom von bis zu 20 A liefern und in einem Eingangsspannungsbereich von 8 V (...)
Benutzerhandbuch: PDF | HTML
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
WQFN-HR (VAN) 19 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos