TPS62421

Name: TPS62421
Brand: TI
SKU: TPS62421
Price: 0.71 USD

AKTIV

Zweifach-Abwärtswandler, 2,25 MHz 600/1000 mA, im kompakten QFN-Gehäuse 3 x 3 mm

Jetzt bestellen

Datenblatt

document-pdfAcrobat TPS6242x 2.25-MHz 600-mA and 1000-mA Dual Step-Down Converter in Small 3-mm × 3-mm VSON Package datasheet (Rev. D) (Englisch) PDF | HTML

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung

TPS62442

AKTIV

2,75-V-zu-6-V-Zweifach-Abwärtswandler mit 2 A oder 3 A im QFN-Gehäuse Smaller solution size with higher output voltage range 0.6 V to 5.5 V

TPS62421

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

0.6

Vin (min) (V)

2.5

Vin (max) (V)

6

Switching frequency (min) (kHz)

2000

Switching frequency (max) (kHz)

2500

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

1.2

Vout (max) (V)

1.8

Iq (typ) (µA)

32

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Topology

Buck

Type

Converter

Iout (max) (A)

0.6

Vin (min) (V)

2.5

Vin (max) (V)

6

Switching frequency (min) (kHz)

2000

Switching frequency (max) (kHz)

2500

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Vout (min) (V)

1.2

Vout (max) (V)

1.8

Iq (typ) (µA)

32

Duty cycle (max) (%)

100

VSON (DRC)

10

9 mm² 3 x 3

High Efficiency up to 95%
V_IN Range from 2.5 V to 6 V
2.25-MHz Fixed Frequency Operation
Output Current 600 mA and 1000 mA
Adjustable Output Voltage from 0.6 V to V_IN
Pin Selectable Output Voltage Supports Simple
Dynamic VoltageScaling
Optional EasyScale One-Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power-Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32-µA Quiescent Current for both
Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin VSON (3 mm × 3 mm)

High Efficiency up to 95%
V_IN Range from 2.5 V to 6 V
2.25-MHz Fixed Frequency Operation
Output Current 600 mA and 1000 mA
Adjustable Output Voltage from 0.6 V to V_IN
Pin Selectable Output Voltage Supports Simple
Dynamic VoltageScaling
Optional EasyScale One-Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power-Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32-µA Quiescent Current for both
Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin VSON (3 mm × 3 mm)

The TPS6242x device is a synchronous dual step-down DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3-V or 5-V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS6242x is ideal for battery-powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low power DSP and processors.

The TPS6242x operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed-frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6242x operates over a free-air temperature range of –40°C to 85°C. It is available in a 10-pin leadless package (3 mm × 3 mm VSON)

The TPS6242x device is a synchronous dual step-down DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3-V or 5-V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS6242x is ideal for battery-powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low power DSP and processors.

The TPS6242x operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed-frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6242x operates over a free-air temperature range of –40°C to 85°C. It is available in a 10-pin leadless package (3 mm × 3 mm VSON)

filter

Andere AC/DC- und DC/DC-Wandler (integrierter FET) suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 17

	Typ	Titel		Datum
*	Data sheet	TPS6242x 2.25-MHz 600-mA and 1000-mA Dual Step-Down Converter in Small 3-mm × 3-mm VSON Package datasheet (Rev. D)	PDF \| HTML	31 Jul 2015
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	06 Dez 2023
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		14 Jun 2019
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		11 Dez 2018
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		22 Jun 2018
	Application note	Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B)		29 Nov 2017
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		24 Okt 2017
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		24 Okt 2016
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		17 Aug 2015
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		29 Jan 2015
	EVM User's guide	TPS624xxEVM-167 User Guide (Rev. A)		02 Nov 2013
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		13 Jan 2012
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		17 Jun 2011
	More literature	TPS62401_NanoEVM_ Schematic		13 Feb 2007
	More literature	BQ24070_NanoEVM_OV		29 Jan 2007
	More literature	TPS62401_NanoEVM_OV		29 Jan 2007
	Application note	Output Voltage Selection for the TPS62400 Family of Buck Converters		20 Sep 2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.