TPS65279V

Name: TPS65279V
Brand: TI
SKU: TPS65279V
Price: 1.338 USD

AKTIV

Synchroner Zweifach-Abwärtswandler, 4,5 bis 18 V Eingangsspannung, 5 A, mit I2C-Schnittstelle

Jetzt bestellen

Datenblatt

document-pdfAcrobat 4.5V to 18V Input, 5A/5A Dual Synchronous Step-Down Converter datasheet (Rev. B) (Englisch)

TPS65279V

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

5

Vin (min) (V)

4.5

Vin (max) (V)

18

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

1600

Features

Enable, Light Load Efficiency, Phase Interleaving, Soft Start Adjustable

Control mode

current mode

Vout (min) (V)

0.6

Vout (max) (V)

15

Iq (typ) (µA)

10000

Duty cycle (max) (%)

95

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Topology

Buck

Type

Converter

Iout (max) (A)

5

Vin (min) (V)

4.5

Vin (max) (V)

18

Switching frequency (min) (kHz)

200

Switching frequency (max) (kHz)

1600

Features

Enable, Light Load Efficiency, Phase Interleaving, Soft Start Adjustable

Control mode

current mode

Vout (min) (V)

0.6

Vout (max) (V)

15

Iq (typ) (µA)

10000

Duty cycle (max) (%)

95

HTSSOP (DAP)

32

89.1 mm² 11 x 8.1

VQFN (RHH)

36

36 mm² 6 x 6

4.5-V to 18-V Wide Input Voltage Range
I²C Controlled 7-Bits VID Programmable
Output Voltage from 0.68 V to 1.95 V with 10-mV
Steps for Each Buck; Output Voltage Can Also be
Set By Resistor Divider
Programmable Slew Rate Control for Output Voltage
Transition
Up to 5-A Maximum Continuous Output Current in
Buck 1 and Buck 2
Buck 1 and Buck 2 can be Paralleled to Deliver
up to 10-A Current
I²C Compatible Interface With Standard
Mode (100 kHz) and Fast Mode (400 kHz)
I²C Read Back Power Good Status and
Die Temperature Warning
Pulse Skipping Mode to Achieve
High Efficiency in Light Load
Adjustable Switching Frequency 200 kHz – 1.6 MHz
Set by External Resistor
Dedicated Enable and Soft-Start for Each Buck
Peak Current-Mode Control with Simple Compensation
Circuit
Cycle-by-Cycle Over Current Protection
180° Out-of-Phase Operation to Reduce Input
Capacitance and Power Supply Induced Noise
Over Temperature Protection
Available in 32-Pin Thermally Enhanced HTSSOP (DAP)
and 36-Pin QFN 6-mm × 6-mm (RHH) Packages

4.5-V to 18-V Wide Input Voltage Range
I²C Controlled 7-Bits VID Programmable
Output Voltage from 0.68 V to 1.95 V with 10-mV
Steps for Each Buck; Output Voltage Can Also be
Set By Resistor Divider
Programmable Slew Rate Control for Output Voltage
Transition
Up to 5-A Maximum Continuous Output Current in
Buck 1 and Buck 2
Buck 1 and Buck 2 can be Paralleled to Deliver
up to 10-A Current
I²C Compatible Interface With Standard
Mode (100 kHz) and Fast Mode (400 kHz)
I²C Read Back Power Good Status and
Die Temperature Warning
Pulse Skipping Mode to Achieve
High Efficiency in Light Load
Adjustable Switching Frequency 200 kHz – 1.6 MHz
Set by External Resistor
Dedicated Enable and Soft-Start for Each Buck
Peak Current-Mode Control with Simple Compensation
Circuit
Cycle-by-Cycle Over Current Protection
180° Out-of-Phase Operation to Reduce Input
Capacitance and Power Supply Induced Noise
Over Temperature Protection
Available in 32-Pin Thermally Enhanced HTSSOP (DAP)
and 36-Pin QFN 6-mm × 6-mm (RHH) Packages

The TPS65279V is a monolithic dual synchronous buck regulator with wide 4.5-V to 18-V operating input voltage that can operate in 5-, 9-, 12- or 15-V bus voltages and battery chemistries. The converters are designed to simplify its application while giving the designer the option to optimize their usage according to the target application.

Each buck converter in TPS65279V has external feedback resistors that can be used for setting the initial start up voltage. The feedback voltage reference for this start-up option is 0.6 V. Once the VID DAC is updated via the I²C, the buck converter switches feedback resistors from external to internal. The output voltage in each buck can be programmable from 0.68 V to 1.95 V in 10-mV steps with I²C Controlled 7-Bits VID.

Each buck converter in TPS65279V can also be I²C controlled for enabling/disabling output voltage, setting the pulse skipping mode and reading the power good status and die temperature warning.

The switching frequency of the converters can be set from 200 kHz to 1.6 MHz with an external resistor. Two converters have clock signal with 180° out-of-phase.

Two bucks in TPS65279V can be paralleled to deliver up to 10-A load current by floating the MODE pin. Two phase operation in current sharing reduces system filtering capacitance and inductance, alleviates EMI and improves output voltage ripple and noise.

TPS65279V features dedicated enable pin when I₂C interface is not used. Independent soft-start pin provides flexibility in power up programmability. Constant frequency peak current mode control simplifies the compensation and provides fast transient response. Cycle-by-cycle over current protection and hiccup mode operation limit MOSFET power dissipation in short circuit or over loading fault conditions. Low side reverse over current protection also prevents excessive sinking current from damaging the converter.

TPS65279V also features a light load pulse skipping mode (PSM) that can be controlled by I²C or MODE pin configuration. The PSM mode allows a power loss reduction on the input power supplied to the system to achieve high efficiency at light loading.

The TPS65279V is available in a 32-pin thermally enhanced HTSSOP (DAP) package and 36-pin QFN 6-mm × 6-mm (RHH) package.