Startseite Energiemanagement Linear- und Low-Dropout-Regler (LDO)
Startseite
Energiemanagement
Linear- und Low-Dropout-Regler (LDO)

TPS737-Q1

AKTIV

Einstellbarer Ultra-Low-Drop-Out-Spannungsregler für die Automobilindustrie, 1 A, mit Gegenstromschu

Jetzt bestellen
Datenblatt

TPS737-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Output options Fixed Output Iout (max) (A) 1 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 3.3 Vout (min) (V) 1.9 Fixed output options (V) 1.9, 3.3 Rating Automotive Noise (µVrms) 51 PSRR at 100 KHz (dB) 32 Iq (typ) (mA) 0.4 Thermal resistance θJA (°C/W) 52 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Reverse Current Protection Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 130 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 1 Vin (max) (V) 5.5 Vin (min) (V) 2.2 Vout (max) (V) 3.3 Vout (min) (V) 1.9 Fixed output options (V) 1.9, 3.3 Rating Automotive Noise (µVrms) 51 PSRR at 100 KHz (dB) 32 Iq (typ) (mA) 0.4 Thermal resistance θJA (°C/W) 52 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Reverse Current Protection Accuracy (%) 3 Dropout voltage (Vdo) (typ) (mV) 130 Operating temperature range (°C) -40 to 125
VSON (DRB) 8 9 mm² 3 x 3
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4A
  • Stable with 1-µF or larger ceramic output capacitor
  • Input voltage range: 2.2 V to 5.5 V
  • Ultra-low dropout voltage: 130 mV (typical) at 1 A
  • Excellent load transient response, even with only 1-µF output capacitor
  • NMOS topology delivers low reverse leakage current
  • 1% initial accuracy
  • 3% overall accuracy over line, load, and temperature
  • Less than 20-nA (typical) quiescent current in shutdown mode
  • Thermal shutdown and current limit for fault protection
  • Available in multiple output voltage versions
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4A
  • Stable with 1-µF or larger ceramic output capacitor
  • Input voltage range: 2.2 V to 5.5 V
  • Ultra-low dropout voltage: 130 mV (typical) at 1 A
  • Excellent load transient response, even with only 1-µF output capacitor
  • NMOS topology delivers low reverse leakage current
  • 1% initial accuracy
  • 3% overall accuracy over line, load, and temperature
  • Less than 20-nA (typical) quiescent current in shutdown mode
  • Thermal shutdown and current limit for fault protection
  • Available in multiple output voltage versions

The TPS737xx-Q1 family of linear low-dropout (LDO) voltage regulators uses an NMOS pass element in a voltage-follower configuration. This topology is relatively insensitive to output capacitor value and ESR, allowing a wide variety of load configurations. Load transient response is excellent, even with a small 1-µF ceramic output capacitor. The NMOS topology also allows very low dropout.

The TPS737xx-Q1 family uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 20 nA and ideal for portable applications. These devices are protected by thermal shutdown and foldback current limit.

The TPS737xx-Q1 family of linear low-dropout (LDO) voltage regulators uses an NMOS pass element in a voltage-follower configuration. This topology is relatively insensitive to output capacitor value and ESR, allowing a wide variety of load configurations. Load transient response is excellent, even with a small 1-µF ceramic output capacitor. The NMOS topology also allows very low dropout.

The TPS737xx-Q1 family uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 20 nA and ideal for portable applications. These devices are protected by thermal shutdown and foldback current limit.
filter Andere Linear- und Low-Dropout-Regler (LDO) suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Selbe Funktionalität wie der verglichene Baustein bei abweichender Anschlussbelegung
TPS746-Q1 AKTIV Low-Dropout-Spannungsregler (LDO) für die Automobilindustrie, 1 A, niedriger Ruhestrom, hoher PSRR-W Wider operating range with 0.85% accuracy and higher PSRR

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 3
Typ Titel Datum
* Data sheet TPS737-Q1 1-A Low-Dropout Regulator With Reverse Current Protection datasheet (Rev. B) 27 Sep 2019
Application note LDO Noise Demystified (Rev. B) PDF | HTML 18 Aug 2020
Application note LDO PSRR Measurement Simplified (Rev. A) PDF | HTML 09 Aug 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

TPS73719 PSpice Transient Model

SBVM305.ZIP (22 KB) - PSpice Model
Herunterladen
Simulationsmodell

TPS73733 PSpice Transient Model

SBVM291.ZIP (22 KB) - PSpice Model
Herunterladen
Referenzdesigns

TIDEP-01012 — Bildgebungsradar mit kaskadiertem Millimeterwellensensor – Referenzdesign

The cascade development kit has two main use cases:
  1. To use the MMWCAS-DSP-EVM as a capture card to fully evaluate the AWR2243 four-chip cascade performance by using the mmWave studio tool, please read the TIDEP-01012 design guide.
  2. To use the MMWCAS-DSP-EVM to develop radar real time SW application, (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-TM4C129SDRAMNVM — Ausführung aus SDRAM mit Codespeicherung im NVM für Hochleistungs-MCU

This reference design demonstrates how to implement and interface Non Volatile Memory and SDRAM to the performance microcontroller TM4C1294NCPDT in TM4C product family. The implementation is made possible by using the EPI Interface of the Microcontroller to interface a 256Mbit SDRAM at 60MHz and (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDA-01512 — Referenzdesign eines PMBus-Spannungsreglers für NXP QorIQ LS2085A/88A-Prozessoren

TIDA-01512 uses the TPS53681 multiphase controller and CSD95490Q5MC Smart Power Stages to implement a high-performance design suitable for powering NXP QorIQ Communications Processors.

The dual outputs of the controller target the 60-ATDC, 1.0-V core rail with a four-phase design and a 30-ATDC, (...)

Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-TM4C129POEAUDIO — Audiokommunikation mit Power Over Ethernet (PoE) – Referenzdesign

This design uses Texas Instrument's high performance TM4C129x microcontrollers (MCUs) with integrated Ethernet PHY to capture, exchange and playback audio efficiently with power supplied over the network (PoE solution) instead of separate external power sources. The application uses TivaWare (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-TM4C129POE — TM4C129POE Power Over Ethernet (PoE) – Referenzdesign für das vernetzte IoT

This design integrates Texas Instruments PoE solutions with TM4C129x high performance microcontrollers to enable customers to develop applications for IoT in a small form factor board. Ability to derive power over existing network cable with intelligence to gather, process and exchange data with (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-TM4CFLASHSRAM — Paralleles XIP-Flash- und SRAM-Design für Code-Download und ‑Ausführung auf Hochleistungs-MCUs

This reference design demonstrates how to implement and interface Asynchronous Parallel Flash and SRAM Memories to the performance microcontroller TM4C129. The implementation is made possible by using the EPI Interface in Host Bus 16 Mode with mutliple Chip Selects to interface a 1Gbit-8Mbit range (...)
Design guide: PDF
Schaltplan: PDF
Referenzdesigns

TIDM-TM4C129XS2E — RTOS-basierter konfigurierbarer Seriell-zu-Ethernet-Konverter auf Hochleistungs-MCUs – Referenzdesig

Legacy products may only contain a serial port. Accessing such end equipments (EEs) is increasingly becoming a challenge due to the inability to add them to a shared network and access them over long distances (like remote control stations). A Serial-to-Ethernet  (S2E) converter provides a (...)
Design guide: PDF
Schaltplan: PDF
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
VSON (DRB) 8 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos