Startseite Energiemanagement AC/DC- und DC/DC-Controller (externer FET)

UCC28060

AKTIV

Natürlicher Interleaved-PFC-Controller mit zweiphasigem Übergangsmodus

Produktdetails

Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode TM Topology Boost, PFC controller Rating Catalog Features > 750 W applications, > 750W Applications, Enable, Interleaved, OVP, Overvoltage protection, Peak current mode, Transition Control Mode Duty cycle (max) (%) 99
Vin (max) (V) 21 Operating temperature range (°C) -40 to 125 Control mode TM Topology Boost, PFC controller Rating Catalog Features > 750 W applications, > 750W Applications, Enable, Interleaved, OVP, Overvoltage protection, Peak current mode, Transition Control Mode Duty cycle (max) (%) 99
SOIC (D) 16 59.4 mm² 9.9 x 6

Optimized for high-volume consumer applications, this solution extends the advantages of transition mode—high efficiency with low-cost components—to higher power ratings than previously possible. By utilizing a Natural Interleaving technique, both channels operate as masters (that is, there is no slave channel) synchronized to the same frequency. This approach delivers inherently strong matching, faster responses, and ensures that each channel operates in transition mode.

Complete system-level protections feature input brownout, output over-voltage, open-loop, overload, soft-start, phase-fail detection, and thermal shutdown. The additional FailSafe over-voltage protection (OVP) feature protects against shorts to an intermediate voltage that, if undetected, could lead to catastrophic device failure.

Optimized for high-volume consumer applications, this solution extends the advantages of transition mode—high efficiency with low-cost components—to higher power ratings than previously possible. By utilizing a Natural Interleaving technique, both channels operate as masters (that is, there is no slave channel) synchronized to the same frequency. This approach delivers inherently strong matching, faster responses, and ensures that each channel operates in transition mode.

Complete system-level protections feature input brownout, output over-voltage, open-loop, overload, soft-start, phase-fail detection, and thermal shutdown. The additional FailSafe over-voltage protection (OVP) feature protects against shorts to an intermediate voltage that, if undetected, could lead to catastrophic device failure.

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Typ Titel Datum
* Data sheet Natural Interleaving™ Dual-Phase Transition-Mode PFC Controller datasheet (Rev. E) 20 Feb 2008
Application note UCC2806x PCB Layout Guideline for PFC 29 Apr 2019
White paper An Interleaved PFC Preregulator for High-Power Converters 28 Apr 2015
Application note LED Driver Based on UCC28060 Interleaved ACDC Single Stage Flyback 19 Okt 2011
Application note Using External Soft Start Circuit for UCC2806x 23 Mär 2011
User guide UCC28060 300W Interleaved PFC Pre-Requlator User's Guide (Rev. B) 11 Jul 2008
User guide A 600-W Interleaved Dual-Phase Transition Mode PFC Converter (Rev. A) 29 Apr 2008

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

UCC28060EVM — UCC28060-Evaluierungsmodul

The UCC28060 is a dual-phase, transition-mode Power Factor Correction (PFC) pre-regulator. The UCC28060EVM is an evaluation module with a 390 V, 300 W dc output that operates from a universal input of 85 VRMS to 265 VRMS and provides power factor correction.

The pre-regulator uses the UCC28060 PFC (...)

Benutzerhandbuch: PDF
Evaluierungsplatine

UCC28070EVM — UCC28070-Evaluierungsmodul

The UCC28070 evaluation module is a 300W, two-phase interleaved, PFC pre-regulator that uses average current mode control techniques to achieve near unity power factor. The pre-regulator was designed to operate off a universal ac line input of 85V to 265V and provides a regulated 390V dc output. (...)
Benutzerhandbuch: PDF
Berechnungstool

SLUC072 UCC28060 Design Calculator

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
AC/DC- und DC/DC-Controller (externer FET)
UCC28060 Natürlicher Interleaved-PFC-Controller mit zweiphasigem Übergangsmodus
Hardware-Entwicklung
Evaluierungsplatine
UCC28060EVM UCC28060-Evaluierungsmodul
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 16 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos