BUF11702
Búfer de alta corriente de 10+1 canales
BUF11702
- Gamma Correction Channels: 10, 6
- Integrated VCOM Buffer
- Excellent Output Current Drive:
- Gamma Channels: > 30mA at 0.5V Swing to Rails(1)
- VCOM: > 150mA at 5V Swing to Rails(1)
- Large Capacitive Load Drive Capability
- Rail-to-Rail Output
- PowerPAD Package
- Low-Power/Channel: < 340µA
- Wide Supply Range: 4.5V to 16V
- Specified for 0°C to 85°C
- High ESD Rating: 4kV
(1) See typical characteristic curves for detail.
PowerPAD is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.
The BUFxx702 are a series of multi-channel buffers targeted towards gamma correction in high-resolution LCD panels. The number of gamma correction channels required depends on a variety of factors and differs greatly from design to design. Therefore, various channel options are offered. For additional space and cost savings, a VCOM channel with higher current drive capability is integrated in the BUF11702 and BUF07702.
The various buffers within the BUFxx702 are carefully matched to the voltage I/O requirements for the gamma correction application. Each buffer is capable of driving heavy capacitive loads and offers fast load current switching. The VCOM channel has increased output drive of > 100mA and can handle even larger capacitive loads.
The BUF07702 and BUF11702 is available in the TSSOP-PowerPAD. package for dramatically increased power dissipation capability. This way, a large number of channels can be handled safely in one package.
A flow-through pinout has been adopted to allow simple PCB routing and maintain the cost-effectiveness of this solution. All inputs and outputs of the BUFxx702 incorporate internal ESD protection circuits that prevent functional failures at voltages up to 4kV (HBM) as tested under MIL-STD-883C Method 3015.
Documentación técnica
Tipo | Título | Fecha | ||
---|---|---|---|---|
* | Data sheet | BUF11702, BUF07702: Multi-Channel LCD Gamma Correction Buffer datasheet (Rev. F) | 24 may 2004 |
Pedidos y calidad
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
- Lugar de fabricación
- Lugar de ensamblaje