LM5035C

ACTIVO

Controlador PWM con salida de controladores de medio puente y SyncFET de 5 V integrada y ciclo de tr

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat LM5035C PWM Controller With Integrated Half-Bridge and SyncFET Drivers datasheet (Rev. D) (Inglés) PDF | HTML

LM5035C

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Vin (max) (V)

15

Operating temperature range (°C)

-40 to 125

Control mode

Feedforward

Topology

Half bridge, Push pull

Rating

Catalog

Features

Current limiting, High-voltage startup, Multi-topology, Pre-bias startup, Synchronization pin

Duty cycle (max) (%)

50

Vin (max) (V)

15

Operating temperature range (°C)

-40 to 125

Control mode

Feedforward

Topology

Half bridge, Push pull

Rating

Catalog

Features

Current limiting, High-voltage startup, Multi-topology, Pre-bias startup, Synchronization pin

Duty cycle (max) (%)

50

HTSSOP (PWP)

20

41.6 mm² 6.5 x 6.4

WQFN (NHZ)

24

20 mm² 5 x 4

105-V and 2-A Half-Bridge Gate Drivers
Synchronous Rectifier Control Outputs With Programmable Delays
Reduced Dead Time Between High and Low-Side Drive for Higher Maximum Duty Cycle.
High Voltage (105 V) Start-Up Regulator
Voltage Mode Control With Line Feedforward and Volt Second Limiting
Resistor Programmed, 2-MHz Capable Oscillator
Programmable Line Undervoltage Lockout and Overvoltage Protection
Internal Thermal Shutdown Protection
Adjustable Soft Start
Versatile Dual Mode Overcurrent Protection With Hiccup Delay Timer
Cycle-by-Cycle Overcurrent Protection
Direct Opto-coupler Interface
Logic Level Synchronous Rectifier Drives
5-V Reference Output
Packages:
- HTSSOP-20 (Thermally Enhanced)
- WQFN-24 (4mm × 5mm)

105-V and 2-A Half-Bridge Gate Drivers
Synchronous Rectifier Control Outputs With Programmable Delays
Reduced Dead Time Between High and Low-Side Drive for Higher Maximum Duty Cycle.
High Voltage (105 V) Start-Up Regulator
Voltage Mode Control With Line Feedforward and Volt Second Limiting
Resistor Programmed, 2-MHz Capable Oscillator
Programmable Line Undervoltage Lockout and Overvoltage Protection
Internal Thermal Shutdown Protection
Adjustable Soft Start
Versatile Dual Mode Overcurrent Protection With Hiccup Delay Timer
Cycle-by-Cycle Overcurrent Protection
Direct Opto-coupler Interface
Logic Level Synchronous Rectifier Drives
5-V Reference Output
Packages:
- HTSSOP-20 (Thermally Enhanced)
- WQFN-24 (4mm × 5mm)

The LM5035C half-bridge controller and gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward.

The LM5035C is a functional variant of the LM5035B half-bridge PWM controller. The amplitude of the SR1 and SR2 waveforms are 5 V instead of the V_CC level. Also, the soft-stop function is disabled in the LM5035C.

The LM5035, LM5035A, LM5035B, and LM5035C include a floating high-side gate driver, which is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high-voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection. The differences between LM5035, LM5035A, LM5035B, and LM5035C are summarized in the Device Comparison Table.

The LM5035C half-bridge controller and gate driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feedforward.

The LM5035C is a functional variant of the LM5035B half-bridge PWM controller. The amplitude of the SR1 and SR2 waveforms are 5 V instead of the V_CC level. Also, the soft-stop function is disabled in the LM5035C.

The LM5035, LM5035A, LM5035B, and LM5035C include a floating high-side gate driver, which is capable of operating with supply voltages up to 105 V. Both the high-side and low-side gate drivers are capable of 2-A peak. An internal high-voltage start-up regulator is included, along with programmable line undervoltage lockout (UVLO) and overvoltage protection (OVP). The oscillator is programmed with a single resistor to frequencies up to 2 MHz. The oscillator can also be synchronized to an external clock. A current sense input and a programmable timer provide cycle-by-cycle current limit and adjustable hiccup mode overload protection. The differences between LM5035, LM5035A, LM5035B, and LM5035C are summarized in the Device Comparison Table.

filter

Buscar otro/a Controladores CA/CC y CC/CC (FET externo)

Descargar Ver vídeo con transcripción Video

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 1

	Tipo	Título		Fecha
*	Data sheet	LM5035C PWM Controller With Integrated Half-Bridge and SyncFET Drivers datasheet (Rev. D)	PDF \| HTML	23 mar 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

LM5035CEVAL — Placa de evaluación para LM5035C

The LM5035C evaluation board is designed to provide the design engineer with a fully functional power converter based on the Half Bridge topology to evaluate the LM5035C controller. The LM5035C is a functional variant of the LM5035B Half-Bridge PWM Controller. The amplitude of the SR control (...)

Guía del usuario: PDF