Inicio Gestión de la energía Reguladores lineales y de baja salida (LDO)

LP38513

ACTIVO

Regulador de voltaje de 3 A, de caída ultrabaja, con señal power good y habilitación para 1,8 V

Detalles del producto

Output options Fixed Output Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.25 Vout (max) (V) 1.8 Vout (min) (V) 1.8 Fixed output options (V) 1.8 Noise (µVrms) 45 Iq (typ) (mA) 10 Thermal resistance θJA (°C/W) 32 Rating Catalog Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Power good Accuracy (%) 2 PSRR at 100 KHz (dB) 29 Dropout voltage (Vdo) (typ) (mV) 425 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.25 Vout (max) (V) 1.8 Vout (min) (V) 1.8 Fixed output options (V) 1.8 Noise (µVrms) 45 Iq (typ) (mA) 10 Thermal resistance θJA (°C/W) 32 Rating Catalog Load capacitance (min) (µF) 10 Regulated outputs (#) 1 Features Enable, Power good Accuracy (%) 2 PSRR at 100 KHz (dB) 29 Dropout voltage (Vdo) (typ) (mV) 425 Operating temperature range (°C) -40 to 125
TO-220 (NDH) 5 86.0552 mm² 10.16 x 8.47 TO-263 (KTT) 5 154.8384 mm² 10.16 x 15.24
  • Input Supply Voltage 2.25 V to 5.5 V
  • Conversions from 2.5-V Rail to 1.8-V Rail
  • Stable with Ceramic Capacitors
  • Low Ground Pin Current
  • Load Regulation of 0.1% for 10 mA to 3-A Load Current
  • 60-μA Typical Quiescent Current in Shutdown Mode
  • Specified Output Current of 3 A
  • Specified VOUT Accuracy of ±2.6% With
    TJ from 0°C to +125°C
  • ERROR Flag Indicates VOUT Status
  • Overtemperature and Overcurrent Protection
  • −40°C to +125°C Operating TJ Range
  • Input Supply Voltage 2.25 V to 5.5 V
  • Conversions from 2.5-V Rail to 1.8-V Rail
  • Stable with Ceramic Capacitors
  • Low Ground Pin Current
  • Load Regulation of 0.1% for 10 mA to 3-A Load Current
  • 60-μA Typical Quiescent Current in Shutdown Mode
  • Specified Output Current of 3 A
  • Specified VOUT Accuracy of ±2.6% With
    TJ from 0°C to +125°C
  • ERROR Flag Indicates VOUT Status
  • Overtemperature and Overcurrent Protection
  • −40°C to +125°C Operating TJ Range

The LP38513 fast-response ultra-low dropout linear regulator operates from a 2.25-V to 5.5-V input supply. This device responds very quickly to step changes in line or load conditions, making it suitable for low-voltage microprocessor applications. Developed on a CMOS process, with a PMOS pass transistor, the LP38513 has low quiescent-current operation independent of the output load current. Ground Pin Current: Typically 12 mA at 3-A load current.Disable Mode: Typically 60 µA quiescent current when the enable (EN) pin is pulled low.ERROR Flag: The ERROR flag goes low if VOUT falls more than typically 15% below the nominal value.Precision Output Voltage: A specified VOUT accuracy of ±2.6% with TJ from 0°C to 125°C.

For all available packages, see the orderable addendum at the end of the data sheet.

The LP38513 fast-response ultra-low dropout linear regulator operates from a 2.25-V to 5.5-V input supply. This device responds very quickly to step changes in line or load conditions, making it suitable for low-voltage microprocessor applications. Developed on a CMOS process, with a PMOS pass transistor, the LP38513 has low quiescent-current operation independent of the output load current. Ground Pin Current: Typically 12 mA at 3-A load current.Disable Mode: Typically 60 µA quiescent current when the enable (EN) pin is pulled low.ERROR Flag: The ERROR flag goes low if VOUT falls more than typically 15% below the nominal value.Precision Output Voltage: A specified VOUT accuracy of ±2.6% with TJ from 0°C to 125°C.

For all available packages, see the orderable addendum at the end of the data sheet.

Descargar Ver vídeo con transcripción Video

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Tipo Título Fecha
* Data sheet LP38513 3-A Fast Response Ultra-Low Dropout Linear Regulator datasheet (Rev. E) PDF | HTML 19 nov 2015
Selection guide Power Management Guide 2018 (Rev. R) 25 jun 2018
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 21 mar 2018
EVM User's guide AN-1518 LP38513S-1.8 Evaluation Board (Rev. A) 24 abr 2013
EVM User's guide AN-1670 LP38513TJ-ADJ Evaluation Board (Rev. B) 24 abr 2013
EVM User's guide AN-1801 LP38511TJ-ADJ Evaluation Board (Rev. B) 24 abr 2013
EVM User's guide AN-1802 LP38512TJ-ADJ Evaluation Board (Rev. B) 24 abr 2013

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Diseños de referencia

TIDA-00826 — Diseño de referencia de extremo frontal del osciloscopio de 2 GHz de 50 ohmios

This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
Design guide: PDF
Esquema: PDF
Diseños de referencia

TIDA-00359 — Diseño de referencia de la solución de registro de tiempo para ADC de GSPS

Low cost, high performance clocking solution for GSPS data converters. This reference design discusses the use of a TRF3765, a low noise frequency synthesizer, generating the sampling clock for a 4 GSPS analog-to-digital converter (ADC12J4000). Experiments demonstrate data sheet comparable SNR and (...)
Design guide: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
TO-220 (NDH) 5 Ultra Librarian
TO-263 (KTT) 5 Ultra Librarian

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos