The TMP4718 is a high accuracy 1°C temperature sensor with one local integrated sensor and a remote temperature sensor input that can be connected to a diode-connected transistor, such as the popular MMBT3904 NPN transistor, to replace traditional thermistors or thermocouples. The remote input can also be connected to a substrate thermal transistor or diode integrated inside microprocessors, microcontrollers, or FPGAs to monitor the die temperature of the IC.
The TMP4718 supports I2C and SMBus communication with logic levels down to 0.8V regardless of main supply rail. This enables interoperability with low voltage 1.2V MCUs without needing a secondary low voltage supply. The TMP4718 includes the Series Resistance Cancellation feature to automatically eliminate temperature errors caused by series resistance of up to 1 kΩ, allowing for greater flexibility routing to thermal diodes. The programmable offset feature allows the device to report offset-adjusted temperature data based on pre-calibrated data in specific user environments. Measurements can be done automatically with programmable conversion period, or with one-shot conversion triggered by an I 2C command.
The TMP4718A and TMP4718B offer the same function but different SMBus or I 2C device addresses. This allows the system to support two sensors on the same bus.
| Tipo | Título | Fecha | ||
|---|---|---|---|---|
| * | Data sheet | TMP4718 High-Accuracy Remote and Local Temperature Sensor with Pin-Programmable Alert Thresholds datasheet (Rev. A) | PDF | HTML | 26 sep 2023 |
| Application note | How to Read and Interpret Digital Temperature Sensor Output Data | PDF | HTML | 12 abr 2024 | |
| Application note | Remote Temperature Transistor Sensor Selection Guide | PDF | HTML | 24 mar 2021 | |
| Application note | Optimizing Remote Diode Temperature Sensor Design (Rev. A) | 18 dic 2019 |
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
La familia TMP-I2C-CLICK de productos MikroE Click board™ son placas complementarias compactas que miden con precisión la temperatura. Estas placas incorporan las temperaturas digitales con una interfaz de circuito interintegrado (I2C) para comunicarse con un procesador host. Cada sensor de (...)
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.