TPS2547

ACTIVO

Controlador de puerto de carga USB e interruptor de alimentación de 3 A con detección de carga

Haga su pedido ahora

Hoja de datos

document-pdfAcrobat TPS2547 USB Charging Port Controller and 3-Amp Power Switch With Load Detection datasheet (Rev. A) (Inglés) PDF | HTML

TPS2547

ACTIVO

Hoja de datos

Haga su pedido ahora

Detalles del producto

Product type

Charge port controller

Vin (min) (V)

4.5

Vin (max) (V)

5.5

Continuous current (max) (A)

3

Current limit (A)

0.2 to 3.0

Operating temperature range (°C)

-40 to 115

Enable

Active High

Number of switches

1

Current limit accuracy at 1 A

0.1

Rating

Catalog

Product type

Charge port controller

Vin (min) (V)

4.5

Vin (max) (V)

5.5

Continuous current (max) (A)

3

Current limit (A)

0.2 to 3.0

Operating temperature range (°C)

-40 to 115

Enable

Active High

Number of switches

1

Current limit accuracy at 1 A

0.1

Rating

Catalog

WQFN (RTE)

16

9 mm² 3 x 3

D+/D– CDP/DCP Modes per USB BC 1.2
D+/D– Shorted Mode per Chinese Telecommunication Industry Standard YD/T
1591-2009
Supports Non-BC1.2 Charging Modes by Automatic Selection:
- D+/D– Divider Modes 2 V/2.7 V and 2.7 V/2 V
- D+/D– 1.2-V Mode
Supports Sleep-Mode Charging and Mouse/Keyboard Wakeup
Load Detection for Power Supply Control in S4/S5 Charging and Port Power Management in All Charge Modes
USB 2.0 and 3.0 Compatible
Integrated 73-mΩ (Typical) High-Side MOSFET
3-A Programmable I_LIMIT Supports 15 Watt Loads
Operating Range: 4.5 V to 5.5 V
2 µA/270 µA I_Q When Disabled/Enabled
Drop-In, BOM Compatible with TPS2543/46
16-Pin WQFN (3.00 mm × 3.00 mm) Package
8-kV ESD Rating on DM/DP Pins
UL Recognized File No. E169910 and CB Certified - Pending

D+/D– CDP/DCP Modes per USB BC 1.2
D+/D– Shorted Mode per Chinese Telecommunication Industry Standard YD/T
1591-2009
Supports Non-BC1.2 Charging Modes by Automatic Selection:
- D+/D– Divider Modes 2 V/2.7 V and 2.7 V/2 V
- D+/D– 1.2-V Mode
Supports Sleep-Mode Charging and Mouse/Keyboard Wakeup
Load Detection for Power Supply Control in S4/S5 Charging and Port Power Management in All Charge Modes
USB 2.0 and 3.0 Compatible
Integrated 73-mΩ (Typical) High-Side MOSFET
3-A Programmable I_LIMIT Supports 15 Watt Loads
Operating Range: 4.5 V to 5.5 V
2 µA/270 µA I_Q When Disabled/Enabled
Drop-In, BOM Compatible with TPS2543/46
16-Pin WQFN (3.00 mm × 3.00 mm) Package
8-kV ESD Rating on DM/DP Pins
UL Recognized File No. E169910 and CB Certified - Pending

The TPS2547 is a USB charging port controller and power switch with an integrated USB 2.0 high-speed data line (D+/D–) switch. TPS2547 provides the electrical signatures on D+/D– to support charging schemes listed in Feature Description section. TI tests charging of popular mobile phones, tablets, and media devices with the TPS2547 to ensure compatibility with both BC1.2 compliant, and non-BC1.2 compliant devices.

In addition to charging popular devices, the TPS2547 also supports two distinct power management features, namely, power wake and port power management (PPM) through the STATUS pin. Power wake allows for power supply control in S4/S5 charging and PPM supports intelligent port power management in multiport systems. Additionally, system wake up (from S3) with a mouse/keyboard (both low speed and full speed) is fully supported in the TPS2547.

The TPS2547 73-mΩ power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. Two programmable current thresholds provide flexibility for setting current limits and load detect thresholds.

The TPS2547 is a USB charging port controller and power switch with an integrated USB 2.0 high-speed data line (D+/D–) switch. TPS2547 provides the electrical signatures on D+/D– to support charging schemes listed in Feature Description section. TI tests charging of popular mobile phones, tablets, and media devices with the TPS2547 to ensure compatibility with both BC1.2 compliant, and non-BC1.2 compliant devices.

In addition to charging popular devices, the TPS2547 also supports two distinct power management features, namely, power wake and port power management (PPM) through the STATUS pin. Power wake allows for power supply control in S4/S5 charging and PPM supports intelligent port power management in multiport systems. Additionally, system wake up (from S3) with a mouse/keyboard (both low speed and full speed) is fully supported in the TPS2547.

The TPS2547 73-mΩ power-distribution switch is intended for applications where heavy capacitive loads and short-circuits are likely to be encountered. Two programmable current thresholds provide flexibility for setting current limits and load detect thresholds.

filter

Buscar otro/a Interruptores de alimentación y controladores de puertos de carga USB

Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new

Comparar alternativas

Pin por pin con la misma funcionalidad que el dispositivo comparado

TPS2546

ACTIVO

Controlador de puerto de carga USB con interruptor automático CDP/SDP e interruptor de alimentaci Improves continuous output current and removes CDP-SDP auto switch functionality.

Documentación técnica

star

=Principal documentación para este producto seleccionada por TI

No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.

Ver todo 2

	Tipo	Título		Fecha
*	Data sheet	TPS2547 USB Charging Port Controller and 3-Amp Power Switch With Load Detection datasheet (Rev. A)	PDF \| HTML	22 may 2017
	Certificate	UL 2367 Certificate of Compliance 20180130-E169910		19 jun 2024

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS2546EVM-064 — Módulo de evaluación para controlador e interruptor de alimentación de puerto de carga USB TPS2546

The Texas Instruments TPS2546EVM-064 evaluation module (EVM) helps designers evaluate the performance of the TPS2546 USB Charging Port Power Switch and Controller. The EVM contains input and output connectors. Jumper controls are also provided to ease evaluation of device features.

Guía del usuario: PDF