Inicio Gestión de la energía Interruptores de alimentación y controladores de puertos de carga USB
Inicio
Gestión de la energía
Interruptores de alimentación y controladores de puertos de carga USB

TPS2549-Q1

ACTIVO

Controlador automotriz de puerto de carga USB con compensación de caída

Haga su pedido ahora
Hoja de datos

TPS2549-Q1

ACTIVO
Hoja de datos Haga su pedido ahora

Detalles del producto

Product type Charge port controller Vin (min) (V) 4.5 Vin (max) (V) 6.5 Continuous current (max) (A) 3.2 Current limit (A) 0.25 to 3.6 Operating temperature range (°C) -40 to 85 Enable Active High Number of switches 1 Current limit accuracy at 1 A 0.1 Rating Automotive
Product type Charge port controller Vin (min) (V) 4.5 Vin (max) (V) 6.5 Continuous current (max) (A) 3.2 Current limit (A) 0.25 to 3.6 Operating temperature range (°C) -40 to 85 Enable Active High Number of switches 1 Current limit accuracy at 1 A 0.1 Rating Automotive
WQFN (RTE) 16 9 mm² 3 x 3
  • AEC-Q100 Qualified With the Following Results:
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C5
  • 4.5-V to 6.5-V Operating Range
  • 47-mΩ (typ.) High-Side MOSFET
  • 3.2-A Maximum Continuous Output Current
  • ±5% CS Output for Cable Compensation
  • CDP Mode per USB Battery Charging Specification 1.2
  • Automatic DCP Modes Selection:
    • Shorted Mode per BC1.2 and YD/T 1591-2009
    • 2.7-V Divider 3 Mode
    • 1.2-V Mode
  • D+ and D– Client Mode for System Update
  • D+ and D– Short-to-VBUS Protection
  • D+ and D– ±8-kV Contact and ±15-kV Air Discharge ESD Rating (IEC 61000-4-2)
  • –40°C to 125°C Junction Operating Temperature
  • 16-Pin QFN (3-mm × 3-mm) Package
  • AEC-Q100 Qualified With the Following Results:
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C5
  • 4.5-V to 6.5-V Operating Range
  • 47-mΩ (typ.) High-Side MOSFET
  • 3.2-A Maximum Continuous Output Current
  • ±5% CS Output for Cable Compensation
  • CDP Mode per USB Battery Charging Specification 1.2
  • Automatic DCP Modes Selection:
    • Shorted Mode per BC1.2 and YD/T 1591-2009
    • 2.7-V Divider 3 Mode
    • 1.2-V Mode
  • D+ and D– Client Mode for System Update
  • D+ and D– Short-to-VBUS Protection
  • D+ and D– ±8-kV Contact and ±15-kV Air Discharge ESD Rating (IEC 61000-4-2)
  • –40°C to 125°C Junction Operating Temperature
  • 16-Pin QFN (3-mm × 3-mm) Package

The TPS2549-Q1 device is a USB charging port controller and power switch with a current-sense output that is able to control an upstream supply. This allows it to maintain 5 V at the USB port even with

heavy charging currents. This is important in systems with long USB cables where significant voltage drops can occur while fast-charging portable devices.

The TP2549-Q1 47-mΩ power switch has two selectable, programmable current limits that support port power management by providing a lower current limit that can be used when adjacent ports are experiencing heavy loads. This is important in systems with multiple ports and an upstream supply unable to provide full current to all ports simultaneously.

The DCP_Auto scheme detects and selects the proper D+ and D– settings to communicate with the attached device, so that it can fast-charge at full current. The integrated CDP detection enables up to 1.5-A fast charging of most portable devices with simultaneous data communication.

The unique client-mode feature allows software updates to client devices, but avoids power conflicts by turning off the internal power switch while keeping the data line connection.

Additionally, the TPS2549-Q1 device integrates short-to-VBUS protection for D+ and D– to prevent damage when D+ and/or D– unexpectedly short to VBUS. To save space in the application, the TPS2549-Q1 device also integrates ESD protection to pass IEC61000-4-2 without external circuitry on D+ and D–.

The TPS2549-Q1 device is a USB charging port controller and power switch with a current-sense output that is able to control an upstream supply. This allows it to maintain 5 V at the USB port even with

heavy charging currents. This is important in systems with long USB cables where significant voltage drops can occur while fast-charging portable devices.

The TP2549-Q1 47-mΩ power switch has two selectable, programmable current limits that support port power management by providing a lower current limit that can be used when adjacent ports are experiencing heavy loads. This is important in systems with multiple ports and an upstream supply unable to provide full current to all ports simultaneously.

The DCP_Auto scheme detects and selects the proper D+ and D– settings to communicate with the attached device, so that it can fast-charge at full current. The integrated CDP detection enables up to 1.5-A fast charging of most portable devices with simultaneous data communication.

The unique client-mode feature allows software updates to client devices, but avoids power conflicts by turning off the internal power switch while keeping the data line connection.

Additionally, the TPS2549-Q1 device integrates short-to-VBUS protection for D+ and D– to prevent damage when D+ and/or D– unexpectedly short to VBUS. To save space in the application, the TPS2549-Q1 device also integrates ESD protection to pass IEC61000-4-2 without external circuitry on D+ and D–.
filter Buscar otro/a Interruptores de alimentación y controladores de puertos de carga USB
Descargar Ver vídeo con transcripción Video

Productos similares que pueden interesarle

open-in-new Comparar alternativas
Misma funcionalidad con diferente configuración de pines que el dispositivo comparado
TPS254900A-Q1 ACTIVO Cargador automotriz de host USB con protección contra cortocircuito a batería This product has higher quality reliability with Polyimid layer, provides short-to-battery protection.
Funcionalidad similar a la del dispositivo comparado
TPS25830-Q1 ACTIVO Convertidor de puerto de carga USB tipo C® y SDP/CDP con protección contra cortocircuito a ba This product is a higher integrated USB Type-C solution with a synchronous DC/DC converter.
TPS25846-Q1 ACTIVO Convertidor de bajada síncrono USB BC1.2 con entrada de 36 V y salida de 3.5 A, de 2.5 V, con soport This product is a higher integrated USB Type-A solution with a synchronous DC/DC converter, supports Client Mode.

Documentación técnica

star =Principal documentación para este producto seleccionada por TI
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 7
Tipo Título Fecha
* Data sheet TPS2549-Q1 Automotive USB Charging Port Controller and Power Switch With Cable Compensation datasheet (Rev. C) PDF | HTML 27 jul 2020
Application note How to Pass MFi Overcurrent Protection Test With USB Charger and Switch Device PDF | HTML 26 feb 2020
Application note Monitoring Load Current With the TPS2549 and TPS254900 CS Pin 31 ago 2017
Application note TPS2549 CDP-SDP Auto Switch 19 jul 2017
EVM User's guide TPS2549Q1EVM-729 User's Guide (Rev. A) 15 sep 2016
Application note TPS2549-Q1 Production Silicon Change List 19 jul 2016
Technical article A complete power solution for automotive USB ports PDF | HTML 12 abr 2016

Diseño y desarrollo

Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.

Placa de evaluación

TPS2549Q1EVM-729 — Módulo de evaluación para controlador e interruptor automotriz de potencia de puerto de carga USB TP

TPS2549Q1EVM-729 is a USB charging port controller with an integrated power switch and USB 2.0 high-speed data line (DP/DM) switches. TPS2549Q1EVM-729 provides the electrical signatures on DP_IN and DM_IN to support all current charging schemes. TPS2549Q1EVM-729 incorporates USB cable voltage drop (...)

Guía del usuario: PDF
No disponible en TI.com
Modelo de simulación

TPS2549 IBIS Model

SLUM624.ZIP (23 KB) - IBIS Model
Descargar
Modelo de simulación

TPS2549-Q1 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM495A.ZIP (46 KB) - PSpice Model
Descargar
Diseños de referencia

PMP9765 — Diseño de referencia de alimentación de puerto de carga USB para automoción con controlador de carga

This reference design includes a power management circuit which is capable of controlling a remote USB charging port in an automotive application environment. The circuit can be supplied directly from the car battery rail. It uses a small and highly efficient step down converter, the TPS62130A-Q1, (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP20249 — Diseño de referencia CISPR 25 Clase 4 para cargador USB doble para sector automotriz

PMP20249 is an EMI optimized design for dual automotive USB charger system utilizing the LMS3635 and LMS3655 regulator ICs (400kHz fully-integrated synchronous buck for automotive application) and TPS2549 USB switch (TPS2549-Q1 automotive USB charging port controller with integrated power switch (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP40286 — Diseño de referencia de DFP USB tipo C™ de 5 V y 3 A + cargador USB tipo A de 5 V y 2.4 A para autom

PMP40286 is a dual port car charger reference design.  The output goes to a 5V 3A USB Type-C™ port and a 5V 2.4A USB type-A port. The USB Type-C port can be backwards compliant with BC1.2 and DCP configurations. The type-A port is capable of compensating for the effects on voltage droop (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP9795 — Diseño de referencia de alimentación de puerto de carga USB para automoción con compensación de cabl

This reference design includes a power management circuit  capable of controlling a remote USB charging port in an automotive application environment. The circuit can be supplied directly from the car battery rail. It uses a small and highly efficient step-down converter, the TPS62130A-Q1, to (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP11670 — Diseño de referencia de cargador de auto USB doble con gestión de la alimentación del puerto

The PMP11670 reference design is a dual channel USB charger for automotive application. It includes a high performance buck converter which provides total 3.5A load current for both channels. The Port Power Management feature of port controllers improves the thermal performance by limiting the max (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP9496 — Diseño de referencia de sistema de cargador USB de 10 W y Clase 5 de CISPR 25 para automoción

The PMP9496  reference design is a conducted EMI-optimized (CISPR 25 Class 5) 10 W design for  efficient automotive USB charger application utilizing the LM53603 regulator IC (2.1MHz fully-integrated synchronous buck for automotive application ) and TPS2549 USB switch(TPS2549-Q1 (...)
Test report: PDF
Esquema: PDF
Diseños de referencia

PMP4471 — Diseño de referencia de cargador USB con compensación de caída lineal integrada para automoción

The PMP4471 reference design provides detailed data for evaluating and verifying a USB charger, which uses a USB charge controller and a buck converter .  The design is capable of compensating for the effects on Vdroop when a smartphone / tablet is connected to the USB charger using a cable (...)
Test report: PDF
Esquema: PDF
Encapsulado Pines Símbolos CAD, huellas y modelos 3D
WQFN (RTE) 16 Ultra Librarian
Se aplican los Términos y condiciones estándar de TI para los elementos de evaluación.

Pedidos y calidad

Información incluida:
  • RoHS
  • REACH
  • Marcado del dispositivo
  • Acabado de plomo/material de la bola
  • Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
  • Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
  • Contenido del material
  • Resumen de calificaciones
  • Monitoreo continuo de confiabilidad
Información incluida:
  • Lugar de fabricación
  • Lugar de ensamblaje

Soporte y capacitación

Foros de TI E2E™ con asistencia técnica de los ingenieros de TI

Ver todos los temas del foro en inglés

El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.

Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI. ​​​​​​​​​​​​​​

Videos